2012 Gmc Sierra 2500 Denali Diesel on 2040-cars

Auto blog

GM follows U.S. trademark for AT4X with application in Mexico

Looks like GM is preparing to return the GMC Sierra 1500 All Terrain X to the marketplace, but with a new name. GM Authority found a trademark application filed in May this year in Mexico for the AT4X moniker. This comes three years after GM filed an application with the U.S. Patent and Trademark Office for the same alphanumeric in February 2016. When GMC introduced the all-new 2019 Sierra, it changed the previous All Terrain trim name to AT4, as seen on the Sierra AT4 we called "offroad overkill." The patent filings lend credence to the idea that the previous All Terrain X trim will soon be introduced by a Sierra 1500 AT4X model.  The erstwhile All Terrain X, introduced for the 2016 model year, took the former All Terrain further into the frame of serious-looking off-roader. On top of the Z71 suspension with a two-inch lift, Rancho monotube shocks, and a locking rear differential, the X added a sport bar for offroad lights, side steps, more dirt-friendly 18-inch wheels in 265/65 mud-terrains instead of 20-inchers on 275/65 all-terrains, a performance exhaust, and a lot more black and body-colored trim. At launch, we said it was "no Raptor threat," and even though GMC launched a 2500HD version in 2017 (pictured), it likely never worried the Ram Power Wagon. We wouldn't expect the equation to change with a possible AT4X, which is a shame, since hardcore OEM offroaders are becoming bro dozers for the mature, moneyed set.

2015 GMC Canyon gets the party started [w/video]

The 2014 Detroit Auto Show press days officially kick off tomorrow, but the night before all the madness commences, General Motors drove its new 2015 GMC Canyon pickup truck out for all to see. To refresh your memory, the Canyon is GMC's new midsize pickup - essentially a re-skinned version of the Chevrolet Colorado that debuted at the LA Auto Show in November.
Many of us at Autoblog prefer the look of the larger GMC Sierra to that of its Chevy Silverado kin, and we're having similar feelings about the new Canyon, especially after seeing it in person. It's sort of a pint-sized version of the Sierra, and it looks great. Clean lines are found throughout, and the Canyon's styling is decidedly premium.
At launch, the Canyon will be offered with the same engines as the Colorado - a 2.5-liter inline four-cylinder engine with 193 horsepower and 184 pound-feet of torque on the base end, and a larger 3.6-liter V6 with 302 hp and 270 lb-ft as an option. The Colorado's 2.8-liter diesel inline four-cylinder will be available after launch. Both two- and four-wheel drive configurations will be available, depending on the model.

2019 GMC Sierra carbon fiber bed: How it's made

FORT WAYNE, Ind. — The redesigned 2019 GMC Sierra has some pretty nifty features, and the one that has had the most attention is the MultiPro flipping and folding tailgate. But the Sierra also features the first-of-its-kind carbon fiber truck bed. It's interesting, of course, for its capabilities, such as being 62 pounds lighter than the all-steel box. It even adds more cargo volume since the material can be assembled and shaped differently from steel. As it turns out, the assembly process is cool, too, which we learned when GMC invited us to see the beds being made. Every GMC carbon fiber bed starts out as perfectly flat sheets of thermoplastic carbon fiber. The sheets consist of a mix of fibers and resins, a bit like the molded carbon fiber parts Lamborghini uses. The sheets are manufactured by Japanese company Teijin, which collaborated with GMC to develop the bed. They're all delivered to Continental Structural Plastics (CSP) in Fort Wayne, Ind., for construction into the actual bed. The company, a subsidiary of Teijin, makes a wide variety of composite and plastic parts for the car industry, including body panels for the C7 Chevy Corvette. The rectangular sheets are cut to shape and stacked up at a giant stamping press. Robots pick up sheets and slide them onto a conveyor that goes into a large oven. The heat softens the parts so they can be stamped. The large primary bed parts such as the base are stamped by CSP's enormous 3,600-ton press, and the smaller ones go through a 1,000-ton press. Each press can do different parts using different stamping dies, and CSP switches between dies to produce different batches of parts. After stamping, the parts roll out mostly ready for assembly, but there are rough edges that are trimmed off by water-jet cutters. These cutting machines also create holes for fasteners and for parts such as tie-down hooks and lights. The stamping process also provides the carbon fiber bed with a unique Easter egg. On the bottom of the base of the bed, there are two words: "Connors Way." This is a tribute to Tim Connors, who was the chief engineer of manufacturing at GM and a strong proponent of the carbon fiber bed. He was tragically killed in a motorcycle crash a few years ago. The words were added to honor him, and they were fortunately approved for production. There are some components to the bed that aren't stamped from the flat sheets of material.