2011 Gmc Sierra 2500 H/d on 2040-cars

Auto blog

2015 Chevy Colorado and GMC Canyon order guides reveal added power

General Motors' Fleet Order Guide system is often the canary in the coal mine for interesting changes on new models. The recent guide for the 2015 Corvette unveiled all sorts of changes that weren't yet known about the sports car. Now, it's time for the 2015 Chevrolet Colorado and GMC Canyon to take their bow in the spotlight, and they look worth the wait. The new midsize trucks are getting a touch more power than first thought, as well as some very nice features.
Extended Cab models of both trucks come standard with a 2.5-liter, direct-injected four-cylinder rated at 200 horsepower at 6,300 rpm and 191 pound-feet of torque at 4,400 rpm. That's a bit more than the 193 hp and 184 lb-ft originally reported for the duo. The standard transmission for the extended trucks is a six-speed manual, but the Work Truck trim is also available with an optional six-speed automatic. Towing for the four-cylinder is rated at 3,500 pounds.
Crew Cab models come standard with a 3.6-liter V6 with 305 hp at 6,800 rpm and 269 lb-ft of torque at 4,300 rpm, with a six-speed automatic. That's also somewhat different than the originally reported rating of 302 hp and 270 lb-ft. Towing for the V6 is rated at 7,000 pounds.

Torque time | 2017 GMC Sierra HD First Drive

It's not the truck that counts, it's how you use it. It's the heavy stuff you fit in its bed or the extremely heavy stuff that gets hooked up to the tow hitch. The ATV, the Jet Skis, the trailer with more square footage than a Greenwich Village apartment. Perhaps you need to get Seabiscuit or, uh, Mr. Ed to wherever they need to gallop next. In our case, there's a pair of very serious-looking snowmobiles perched atop the bed of a GMC Sierra. They spread out as wide as the extended tow mirrors, and their back halves are dangling precariously beyond the truck. Sterling Archer would be giddy; I'm a little nervous. But only because canyon roads and wide vehicles with a high center of gravity go together like peas and custard. The added weight is no sweat at all. That's because this is the 2017 GMC Sierra HD Denali, a truck with the sort of enhanced power, torque, suspension, and stopping capability expected of a heavy-duty pickup. And for this year, the power and torque get a serious bump courtesy of a new 6.6-liter Duramax turbodiesel engine reengineered from almost the ground up with 90 percent new parts. It's quieter and more efficient and it emits less, while most importantly producing 445 horsepower and 910 pound-feet of torque. That's up from 397 and 765, respectively. Chevy fans will note that the same engine is also available in the updated 2017 Silverado HD. Now, for those keeping score at home, that horsepower is best-in-class but the torque number still falls short of the new Ford Super Duty and its Power Stroke diesel V8's 925 lb-ft. Aw shucks. For the record, GM's engineers didn't seem too concerned that they weren't able to eke out an extra 16 torques just to say they're No. 1. "We wanted to first meet emissions and then deliver the maximum horsepower and torque we could, and deliver it over the widest usability range possible," said chief engineer Eric Stanczak. And let's be honest here, 910 pound-feet is herculean, and once again, a jump of 145 lb-ft. Or one Subaru Impreza's worth. Or 110 more than the best Ram can do on a 2500, and its Cummins turbodiesel's 800 pound-feet was eye-popping not too long ago. (The Ram 3500 maxes out at 900 lb-ft with the right transmission.) Ah, but here's the rub. That Cummins-equipped Ram 2500 can still tow more weight according to SAE-compliant measurements – 17,510 pounds for a Ram crew cab with a short bed versus 13,000 in the similar Sierra 2500. The Ford F-250 can manage 15,000.

GMC Canyon's jump seats innovate to keep kids safe [w/video]

We dig simple solutions to problems. There's something highly gratifying about making a minute change to fix something, rather than tearing up the playbook. That's what GMC has done with the new Canyon midsize pickup.
When putting a car seat in, car seat manufacturers require that at least 80 percent of the seat's base fit on the bottom cushion. That's a big problem in extended-cab pickups like the Canyon, which feature jump seats with shorter bottom cushions, in place of the larger, more traditionally designed bench.
The Canyon gets around this with extendable jump seats - simply pop out the headrest and slot it into the bottom seat cushion, and the truck can now easily accommodate a child's seat.