2011 Gmc Sierra 2500. 55800 Miles on 2040-cars

Auto blog

GM reportedly developing 2.5-liter turbo four-cylinder

General Motors is allocating a massive amount of resources to developing electric technology, but it's not forgetting about the gasoline-powered cars that make up the bulk of its sales. It's reportedly designing a new 2.5-liter turbocharged four-cylinder engine based on its 2.7. Citing "sources familiar with the matter," enthusiast website GM Authority wrote that the 2.5-liter four is "in [the] final stages of development," meaning it should be announced sooner rather than later (assuming the report is accurate). Technical details are few and far between as of writing. The publication learned that the 2.5 will be part of the Cylinder Set Strategy (CSS) family of engines and that it will be mechanically related to the 2.7-liter currently found in the Chevrolet Silverado 1500, among several other models. It will feature dual overhead camshafts. It's too early to tell which models the 2.5-liter four-cylinder will end up in, or how much power it will generate. The output will likely depend on the application. For context, the 2.7 delivers 310 horsepower at 5,600 rpm and 348 pound-feet of torque between 1,500 and 4,000 rpm in the Silverado. In the smaller Colorado, it provides anywhere between 237 and 310 horsepower depending on the trim level selected. While this is pure speculation, our crystal ball tells us the engine will end up powering crossovers. It's an easy deduction to make. We can't imagine it will be offered in the Silverado, and seeing it in the Colorado is unlikely because its entry-level engine develops 237 horsepower; there's likely not much of a market for a midsize truck with 200 or so horsepower. Putting it in the Corvette wouldn't make sense and the Camaro has nearly reached the end of its life cycle without a successor planned. This leaves us with Chevrolet's range of crossovers, like the Equinox, as well as their GMC-, Buick-, and Cadillac-branded counterparts. We're not discounting the possibility that the cars set to receive the 2.5 haven't been unveiled, but those are likely crossovers, too; the odds of seeing another big Chevy sedan are very, very low. General Motors hasn't commented on the report, and it hasn't publicly announced plans to expand its CSS family of engines. If the report is accurate, we should learn more about the new turbocharged, 2.5-liter four-cylinder engine in the not-too-distant future. Featured Gallery 2022 Chevrolet Equinox RS View 56 Photos Buick Chevrolet GM GMC

Next-generation GMC Canyon, Chevy Colorado spied together

With the debut of the next-generation GMC Canyon coming in a couple of months (in off-road-ready AT4 guise no less), it's no surprise that both it and the Chevy Colorado are out testing without the heavy coverings of early prototypes. One of our spy photographers caught examples of both trucks with close-fitting vinyl wraps. This gives us a great opportunity to see each pickup more clearly, but also to compare and contrast the designs. From the front, the GMC features a narrower, but seemingly taller grille. At the top are slender lamps. They seem to be daytime running lights, though, and below them are much larger units that will function as the actual headlights. The prototype shown seems to be one of the AT4 variants, based on the lack of a lower air dam and the opened up corners of each bumper. Small fog lights show up in the lower bumper, too. As for the Chevy, its grille is wider, and it blends into the headlights. The lights are at the top of the grille, and they seem to incorporate the actual headlights, not just running lamps. The grille mesh has some interesting detailing, and there are auxiliary lights below the main headlights. This one seems to be a more mainstream Colorado model since it still has a front air dam, possibly a Z71 model, considering the chunky tires. Not surprisingly, the two trucks are very similar from the sides and the rear. They have cabins that look lower, longer and more squared-off than the current models. The fenders look more punched out and aggressive, too. The main differentiator between the Chevy and GMC are the wheel openings. The GMC has sharp corners and the Chevy has more rounded ones, as is the case with the full-size trucks. As previously mentioned, the GMC Canyon AT4 will be revealed this summer, so likely in just a month or two. The Colorado will likely be revealed this summer, too. It's expected that it will use the turbocharged 2.7-liter four-cylinder shared with the Silverado. Naturally, it will be available with two- and four-wheel drive and a variety of trim levels including the AT4 and ZR2 off-road versions. Related video:

GM to invest $632 million in Indiana plant for future pickup truck production

General Motors plans to invest $632 million in its Fort Wayne, Indiana, assembly facility to prepare the plant for future internal combustion engine full-size light duty trucks, it said on Monday. The investment will be used to support new conveyors, tooling and equipment for the plant that manufactures GM's Chevrolet Silverado 1500 and GMC Sierra 1500 trucks. GM has detailed more than $2.3 billion in planned investment in a series of announcements since last week as it works to retool existing North American auto plants and introduce more efficient next-generation internal-combustion full-size trucks and SUVs. Another investment announcement is planned later this week. The largest U.S. automaker is continuing to make big investments in gas-powered vehicles even as it vows to stop building them in 2035. Last week, GM said it was investing more than $500 million in its Arlington, Texas, assembly plant to prepare it for production of internal combustion engine full-size SUVs. GM faces increasingly stringent emissions requirements from California and the Environmental Protection Agency (EPA). Last week, GM also said it plans to invest more than $1 billion to re-tool two manufacturing sites in Flint, Michigan, to prepare for a new generation of its heavy-duty trucks. The Texas announcement highlights the company's commitment to continue "providing customers with a strong portfolio of (internal combustion) vehicles for years to come," GM said last week. On Tuesday, GM said it would invest C$280 million ($210 million) in its Canadian Oshawa Assembly to produce the next-generation internal combustion engine full-size trucks. GM paid $128.2 million in fines for failing to meet Corporate Average Fuel Economy (CAFE) program requirements for 2016 and 2017, records released recently show. The EPA in April proposed requiring a 56% reduction in projected fleet average emissions over 2026 requirements. (Reporting by David Sherpardson in Washington and Shivansh Tiwary in Bengaluru; Editing by Shilpi Majumdar and Conor Humphries) Plants/Manufacturing Chevrolet GM GMC