2024 Gmc Sierra 1500 Slt on 2040-cars

Auto blog

2024 GMC Sierra HD unveiled with new design and more powerful turbodiesel V8

The 2024 Chevrolet Silverado HD made its debut in September 2022, so it was only a matter of time before the GMC Sierra HD received a similar round of updates. Unveiled online, the truck gains a new-look design and a more powerful turbodiesel V8, among other changes. GMC developed the Sierra HD primarily for towing and hauling so the most significant changes are found under the hood. The available 6.6-liter turbodiesel Duramax V8 engine now develops 470 horsepower at 2,800 rpm and 975 pound-feet of torque at 1,600 rpm, figures that represent increases of 25 and 65, respectively, over the 2023 model and that match the 2024 Silverado HD's. GMC notes it increased low-end torque by about 25% by fitting a new turbocharger. The V8 spins the rear or the four wheels via a 10-speed automatic transmission.  On the gasoline side of the spectrum, the 6.6-liter V8's output stays flat at 401 horsepower and 464 pound-feet of torque. It's now bolted to a 10-speed automatic transmission, and replacing the 2023 truck's six-speed lets the engine run closer to its peak power for longer periods. Here again, rear-wheel-drive comes standard and a part-time four-wheel-drive system is available across the entire line-up. Properly equipped, the 2024 Sierra 2500 HD Crew Cab can tow up to 21,900 pounds. The standard 2500 HD's towing capacity checks in at 22,500 pounds (a 4,000-pound improvement), and the 3500 HD is capable of towing up to 36,000 pounds — that's nearly 13 Subaru BRZs. Buyers have a dizzying selection of trim levels and body styles to choose from. The range includes Regular, Extended, and Crew cabs as well as seven trim levels called Pro, SLE, SLT, AT4, AT4X, Denali, and Denali Ultimate, respectively. The AT4X variant will not be available at launch, and the Denali Ultimate is new for the 2024 model year. Additionally, 3500 HD models can be ordered with dual rear wheels. What the truck looks like depends on the trim level. Broadly speaking, designers drew a more angular front end with a new-look grille, sharper-looking lights, and a redesigned bumper. New wheels are part of the update as well; the 3500 HD dually gets 18-inch polished aluminum wheels, and 22-inch units are optional on single-rear-wheel trucks. Finally, the color palette grows with six optional shades called Titanium Rush Metallic, Sterling Metallic, Volcanic Red Tintcoat, Redwood Metallic, Meteorite Metallic, and Downpour Metallic, respectively.

GM's labor deal with UAW union on verge of ratification

Nov 15 (Reuters) - General Motors' tentative labor deal with the United Auto Workers (UAW) union closed in on ratification as the votes were counted on Wednesday. Following the approval earlier in the day by more than 60% of union members at the Detroit automaker's large Arlington, Texas, assembly plant, additional votes in favor have the deal close to clinching majority approval. The number of union locals, most of which are smaller, still to report vote totals is not large. After several large assembly plants voted against the deal earlier on Wednesday, some media had reported the deal was heading toward failure. But Arlington's support, followed by strong voting in favor by smaller warehouse and parts facilities, has put the deal on the brink of approval. This would mark the first ratification of a deal, which runs through April 2028, with one of the Detroit Three automakers. Ford and Stellantis voting is still under way, and workers at both companies were favoring ratification by comfortable margins. The UAW's GM vote tracking site currently shows approval of the contract leading by a 54% to 46% margin with almost 32,000 workers having cast votes out of about 46,000 UAW-represented GM workers. The Arlington plant, with about 5,000 UAW members, has the most of any GM plant. Voting officially ends on Thursday at 4 p.m. EST, although most votes will be cast on Wednesday. The UAW went on strike for more than six weeks against the Detroit Three, seeking better wages, working conditions and cost-of-living adjustments. All three companies agreed to tentative agreements about two weeks ago. Workers at other GM assembly plants voted against the deal, including 60% of workers at its Fort Wayne, Indiana, truck plant, 53% at its Wentzville, Missouri, plant, 58% of workers at GM's Lansing Grand River plant and 61% of workers at the Lansing Delta Township plant. Seven of GM's 11 assembly plants rejected the deal. In addition to Arlington, workers at plants in Detroit, Fairfax, Kansas; and Lake Orion, Michigan; approved the agreement. Only nine facilities are still listed without vote totals on the UAW vote tracker, including GM's Lockport, New York, components plant with about 1,200 members. Those voting in favor of the agreement have a lead of almost 2,500 and many of the facilities still to come include workers who stand to receive large pay increases upon ratification.

2015 Chevy Canyon, GMC Colorado to net up to 27 mpg with 4-cylinder

Before even officially going on sale to customers, the GMC Canyon and Chevrolet Colorado midsize pickup twins are already proving to be a success with dealer orders exceeding original projections. Now, there is even more good news for these siblings, with the fuel economy for their four-cylinder engines netting class-leading numbers and the 3.6-liter V6 getting segment-best payload ratings.
The 2.5-liter four-cylinder in the two trucks makes 200 horsepower and 191 pound-feet of torque, and in rear-wheel drive and six-speed manual trim it has an EPA rating of 19 mpg city, 26 mpg highway and 22 mpg combined. Opting for a two-wheel drive configuration with the six-speed automatic bumps those figures slightly to 20 mpg city, 27 mpg highway and 22 mpg combined. Finally, a four-wheel drive model with the automatic 'box carries a 19/25/21 rating. Those numbers are a tick better here and there compared to what's offered by the optional V6.
The twins' major four-cylinder, midsize pickup rivals are the Toyota Tacoma and Nissan Frontier, but they're both getting somewhat long in the tooth. To compare fuel economy and power, a two-wheel drive Tacoma with its 2.7-liter four-cylinder is rated at 159 hp and 180 lb-ft, and achieves 21/25/22 mpg. The Frontier with its 2.5-liter four-cylinder is good for 152 hp and 171 lb-ft, and carries 19/23/21 mpg figures.