2015 Gmc Sierra 1500 Crew Cab Slt on 2040-cars

Auto blog

GMC Syclone pickup returns via Special Vehicle Engineering

The original GMC Syclone was a 1991 mid-size Sonoma pickup turned muscle truck. Its heavily modified 4.3-liter V6 sported a turbocharger, intercooler, and modified internals, raising output to a Corvette-baiting 280 horsepower and 350 pound-feet of torque. The engine was paired with a four-speed automatic, rear-biased all-wheel drive, and four-wheel antilock brakes (the coming thing). With an all-black livery and a lowered ride height, the Syclone looked the business, and backed up those looks with a 0-to-60 time of 4.3 seconds and a 13.4-second quarter-mile, according to contemporary magazine testing. Given all the recent interest in high-performance pickups, it's amazing that GMC hasn't revived the Syclone. But where manufacturers leave an opening, the aftermarket steps in — in this case that's Specialty Vehicle Engineering, which as CNET reports is resurrecting the nameplate for a build of 100 new Syclones, based on the GMC Canyon, which will update the idea a lot more horsepower. The 2019 Syclone takes as its starting point the extended-cab version of the Canyon. The engine is again a V6, this time a 3.6-liter fitted with a supercharger and a custom cat-back exhaust system, upping output to 455 ponies from the stock 306. SVE's Syclone can be had with rear- or all-wheel drive, and it, too, features upgrades to the brakes and chassis. Six-piston front calipers are fitted in place of the standard four-piston units, and the slotted front rotors are upsized from 12.2 inches to 13.6. The suspension is lowered by two inches up front and five inches at the rear, with stiffer traction bars, bushings, dampers, and a heftier rear anti-roll bar. Unlike the original, the modern Syclone can be had in colors other than black — any of the standard Canyon hues are available — but the appearance is customized with rocker-panel extensions, body-color grille and rear bumper, and a composite hood insert. The interior gets embroidered logos and badges, including a numbered plaque on the dash. The price for the Syclone is $39,995 — that's for the package, on top of the cost of the truck. But at least ordering is easy: The Syclone package can be ordered through select GMC dealers.

Diesel details: Comparing Ram 1500 EcoDiesel, Chevy Silverado Duramax, Ford F-150 Powerstroke

With specifications for the 2019 Ford F-150 Power Stroke diesel already out, and the details on the 2020 Ram 1500 EcoDiesel and Chevy Silverado Duramax (and its GMC Sierra twin) trickling out, we felt it was a good time to start comparing the full-size trucks' light-duty diesels. Bear in mind, we've only driven one of these new diesel trucks, so we'll be sticking to numbers for now. Some numbers haven't been announced yet, either, but stay tuned, because we'll be updating this post with additional specifications as they become available. And if you want to compare any other versions of these trucks with other vehicles, be sure to check out our comparison tool. Now let's start comparing, starting with our big chart of numbers below. As we can plainly see, these trucks are quite closely matched. Each one has six cylinders, a displacement of 3.0 liters and a turbocharger to boost it. The output of each is somewhat close, too. The Ram 1500 EcoDiesel is the torque king at 480 pound-feet, 20 more than the GM trucks and 40 more than the Ford. The GM trucks win on power, though, with 277 ponies, 17 more than the Ram, and 27 more than the Ford. GM does report that you get their trucks' peak 460 pound-feet of torque from 1,500 rpm to 3,000 rpm, whereas the others only report peak torque at a particular point in the rev band, but all of these trucks should have wide, flat torque curves as you would expect from modern turbodiesels. 2020 Ram 1500 EcoDiesel View 8 Photos Engine output is only one part of the truck performance equation. We also have towing and payload capacity, as well as fuel economy. With towing, the Ram 1500 is the current leader with a maximum capacity of 12,560 pounds. That tops the Ford F-150's 11,400-pound tow rating by well over 1,000 pounds. The F-150 can carry 2,020 pounds in its bed, but we don't know yet whether that's better or worse than the Ram or the GM trucks. We also don't have numbers for the GM trucks' towing capacities. View 9 Photos As for fuel economy, the Ford F-150 manages a thoroughly impressive 22 mpg in the city and 30 on the highway with two-wheel drive. Choosing four-wheel drive drops those numbers to 20 and 25 respectively. The fuel economy numbers for the Ram, Chevy and GMC haven't been revealed yet, but for some comparison, we can look at the old Ram EcoDiesel. That truck's best fuel economy was 20 in the city and 27 on the highway with two-wheel drive.

GM to sink over $900M into 4 plants, mostly for a new V8

FLINT, Mich. — General Motors says it will spend more than $900 million to update four factories, with the bulk going to an engine plant in Flint, Michigan, to build the next-generation V8 for big pickup trucks and SUVs. Factories in Rochester, New York; Defiance, Ohio; and Bay City, Michigan, also will see investments, some to make V8 engine components as well as parts for future electric vehicles, the company said Friday. The investments won't create any new jobs, but they will preserve about 2,400 hourly and salaried positions positions at the four sites, the company said. The investments “provide job security at these plants for years to come,” Gerald Johnson, GM's manufacturing chief, said in a statement. Much of the money, $579 million, will go to Flint Engine Operations for equipment to build the sixth-generation small-block V8 that will go into the next round of big pickup trucks and SUVs. The plant now employs about 700 people who also will keep making their current product, a diesel engine used in light trucks. GM, like other automakers, is facing stricter government fuel economy standards and pollution limits starting in the 2024 model year. New vehicles sold in the U.S. will have to average at least 40 miles per gallon of gasoline in 2026, up from about 28 mpg, under new Biden administration rules that undo a rollback of standards enacted under former President Donald Trump. That means the new V8 will have to get better mileage and pollute less than the current versions. Although GM wouldn't release details on the new engine, Johnson said during a news conference at the Flint plant that it would be more efficient than the current version. GM has a goal of selling only electric passenger vehicles by 2035, but Johnson said that's a dozen years out, a period when many customers will still want gas engines. “We know that has a horizon,” he said. “Between here and there, there are a lot of internal combustion customers that we don't want to lose,” he said. In addition to Flint, GM's engine components plant in Bay City, Michigan, will get $216 million to build camshafts and connecting rods, and to machine engine blocks and heads for the new V8 being built in Flint. The plant now employs about 425. The Defiance, Ohio, foundry will get $55 million to build a variety of block castings for the new V8. Included is $8 million for castings to support future electric vehicles, the company said. The plant has about 530 employees.