2014 Gmc Sierra 1500 Slt on 2040-cars

Auto blog

2022 Hummer EV Edition 1 pickups ready to go to customers

It's official: Two years after GM announced the electric GMC Hummer pickup, the first couple dozen units have left the line at the GM Factory Zero Detroit-Hamtramck Assembly Center, according to GM president Mark Reuss. In an interview with CNBC to celebrate the milestone, Reuss said 17 Hummer EVs are ready for delivery to customers. This makes the Hummer the first of GM's new Ultium-based EVs to leave the factory, and the second electric pickup on the market after the Rivian R1T. The first 1,200 Hummer EVs made will be Edition 1 models, all of which are Interstellar White outside with Lunar Horizon interiors and bronze badging. Each of the $112,595 pickups is powered by three Ultium motors producing a GM-estimated 1,000 horsepower and 11,500 pound-feet of torque, loaded with features like height-adjusting adaptive suspension, skid rails and rock sliders, 35-inch tires, the diagonal-driving CrabWalk, the launch control system Watts to Freedom that unlocks a three-second sprint to 60 miles per hour, and Super Cruise. Range is a GM-estimated 329 miles when the 200-kWh battery is fully charged. As these filter out to eager owners, GM is prepping the next four phases of the Hummer rollout. About a year from now, in autumn of 2022, Factory Zero will begin production of the first widely available Hummer, the EV3X pickup that starts at $99,995 before destination. Three Ultium motors will provide an estimated 800 horsepower and 9,500 pound-feet of torque to a range estimated beyond 300 miles. Spring of 2023 is expected to deliver the Hummer EV2X pickup at an MSRP of $89,995, utilizing two motors producing a total 625 hp and 7,400 lb-ft over a range also estimated to go beyond 300 miles. Around the same time, the first units of the $105,595 Hummer SUV Edition 1 are planned to head down lines at Factory Zero. Finally, in the spring of 2024, the entry-level $79,995 Hummer EV2 pickup and its two-motor powertrain should arrive, making the same output as the EV2X, but only good for a range of around 250 miles. That won't be all we see from Factory Zero, either. GM invested $2.2 billion in the Detroit-Hamtramck plant that once built bread-and-butter GM fare like the Chevrolet Impala, Buick LaCrosse, and Oldsmobile Toronado in order to turn the facility into its first EV base of manufacturing operations for Ultium products. The battery-electric Chevrolet Silverado and GMC Sierra pickups will be built there, as will the Cruise Origin robotaxi.

GMC Sierra AT4X reportedly on the way, nameplate could be GMC's ZR2

In 2016, GM filed an application with Mexico's Institute of Industrial Property to reserve the name AT4X, and in 2019, the automaker made the same request to the U.S. Patent and Trademark Office. Seeing that GMC's current AT4 trim replaces the former All Terrain trim used on the last-gen Sierra pickup, there have been suspicions ever since those trademark filings that GM would use the AT4X name to replace GMC's former All Terrain X trim. GM Authority reports that this is precisely what's going to happen, citing "sources familiar with the matter." The outlet even gleaned an equipment group number: 4SG for AT4X, whereas AT4 is equipment group 4SB.  The surmise is that GMC is again developing its versions of Chevrolet's dirt-clobbering pickups that wear the ZR2 name. Spy shooters caught the GMC Canyon earlier this month trotting around on Multimatic's DSSV dampers and a set of 33-inch tires like its Colorado ZR2 sibling. The Canyon already offers an AT4 trim, it's thought this beefier setup will roll into the lineup as an AT4X.  Stepping up to the half-ton league, at the end of last month Chevy released a teaser for the Silverado ZR2, which had been caught in prototype guise (pictured at top) around Detroit on at least two occasions. We've mused that the production Silverado ZR2 could take some hardcore off-roader cues from the factory-upgraded Silverado ZR2 race truck like a lifted stance, long-travel front suspension, four-leaf springs instead of three-leaf, electronic locking front and rear differentials, and a wider track. One of the production prototypes was caught on 33-inch tires, but we wouldn't be shocked to see 35-inchers on the spec sheet. That size would match the race truck and the rubber fitted to the cross-town rivals Ford Raptor and Ram 1500 TRX. A GMC Sierra AT4X would be the plusher, pricier, chrome-ier version of the ZR2. The aforementioned Multimatic shocks could also be on the docket. We'd expect the GMC Sierra AT4X to bow with the heavily updated 2022 pickup, whenever that arrives. Events around the world of late delayed the pickup, its launch now thought to happen late next year or in early 2023. Related Video:  

GM recalls Colorado, Canyon, and Malibu for airbag problem

The Basics: General Motors will recall and issue a stop sale on 1,740 total examples of the 2016 Chevrolet Colorado, Malibu, and GMC Canyon. This includes 1,579 units in the US and 161 in Canada. The Problem: The second stage of the driver front airbag inflator might not be present. If this happens, the airbag won't fill as quickly as it should in a high-speed crash, which could increase the risk of injury, according to Reuters. This is not related in any way to Takata's inflator problems, and these parts come from a different supplier. Injuries/Deaths: None reported. The Fix: GM will replace the vehicles' airbag assemblies. If You Own One: GM spokesperson Tom Wilkinson told Autoblog he wasn't specifically sure when recall repairs would begin but said it would be "shortly." He expects the fixes to happen "quickly" because of the small number of affected vehicles, and many of them are either in transport or already in dealer stock. More Information: GM recalled the 2015 Canyon and Colorado in 2014 for a completely separate airbag issue. In that case, a manufacturing error improperly wired the connectors. Related Video: GM Statement GM is recalling 1,579 MY 2016 Chevrolet Colorado, GMC Canyon and Chevrolet Malibu vehicles in the United States and 161 in Canada to replace driver-side front airbags. The second stage of the airbag may not deploy properly in certain high-speed crashes. During a routine quality inspection, it was determined that a component required for a second-stage/high-output deployment was not loaded during the inflator build. Dealers will replace the driver-side front airbag assembly. There have been no reports of crashes or injuries related to this issue. This issue is unrelated to the ongoing Takata recalls.