2014 Gmc Sierra 1500 Slt on 2040-cars

Auto blog

GMC Acadia goes big again? Spy photos show next-gen prototype

GMC is testing what looks a lot like a new full-size SUV, signaling the likelihood that it will return to full-size segment after the current generation has run its course. GM downsized the Acadia for the 2017 redesign, carving nearly 10 inches off its length and 3 inches from its girth. For the next generation, it appears that script will be aggressively flipped.  The hierarchy of GM's unibody family SUVs was already a bit wonky before the Acadia's 2017 redesign, and continues to be now. While it would be logical for the Chevrolet Traverse, GMC Acadia, Buick Enclave and Cadillac XT6 — all three-row crossovers — to be different skins on the same fundamental chassis, that's not actually the case. The Acadia is a full foot shorter than either the Traverse or Enclave, with the XT6 falling in between. Based on these photos, that will no longer be the case when the new GMC Acadia debuts. Since the current one went on sale in 2016 as a 2017 model, it's about due for a replacement.  We can't see much beyond basic proportions here, but those tell a clear story. It's pretty obvious that the hood on the prototype is wider and sits higher than on the current car, with perhaps less slope to the now-wider nose. We can also see the faintest impressions of creasing on the flanks, likely leading to the same broad, angular hip treatment present on the current car. Viewed side-by-side, we can see a little more front and rear overhang. There's no obvious hint of substantially longer wheelbase here (the rear doors line up almost perfectly), so we're probably looking at something that is wider but not necessarily much longer.  In any event, we shouldn't have to wait too long to find out exactly what GM has in store for its "Pro" brand.  Related video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

GM recalls 3,300 pickups and SUVs for new ignition-switch issue [UPDATE]

UPDATE: A statement from GM about the recall has been added below. The exact total of vehicles affected is 3,296, including 3,073 of them in the US. General Motors isn't letting an ignition-switch problem grow into a massive scandal again. The automaker is recalling about 3,300 North American trucks and SUVs. They are: the 2014 Chevrolet Silverado and GMC Sierra and the 2015 Chevy Suburban and Chevy Tahoe, as well as 2015 model heavy-duty pickups, the Detroit News reports, citing an Associated Press story. The issue appears to have been caught fairly quickly. In this case, the keys can get stuck in the "start" position and then slip to "accessory" if bumped. This is because the ignition lock gears have an outer diameter that's larger than the specifications allow. When that happens the engine shuts off, and the driver loses assistance to the steering and brakes. The airbags might also be affected. The vehicles get a new ignition-lock housing to fix the problem. According to the Detroit News, an employee who experienced the problem with the switch discovered the issue, and this person then let officials at the automaker know as part of the Speak Up for Safety program. A total of five reports of the fault were discovered. However, there are no cases of injuries or crashes. The claims to the automaker's resolution program eventually tallied that GM's previous ignition switch problem included 124 deaths and 275 injuries. The company also had to recall millions of vehicles and pay significant fines to the US government. GM Statement General Motors is recalling 3,073 full-size trucks from the 2014 and 2015 model years in the U.S. Some of these vehicles may have an ignition lock actuator gear with an outer diameter that exceeds specifications, which may make turning the ignition key difficult. The ignition key could get stuck in the "start" position. This may be more likely at higher interior ambient temperatures. If the vehicle is driven with the key stuck in the "start" position, and the vehicle experiences a significant jarring event or the vehicle's interior temperature cools, the ignition lock cylinder could move out of the "start" position, rotate past the "run" position, and move into the "accessory" position, leading to loss of power steering assist, power brakes and potentially air bag deployment in certain crashes. Dealers will replace the ignition lock housing.

2022 Chevy Silverado HD gains Multi-Flex tailgate as an option

GM is spreading the Multi-Pro Tailgate love around its truck lineup, and the Silverado HD is the latest pickup to gain the option. Just like the 2021 Silverado 1500, Chevy uses the “Multi-Flex” name for it in the HD, eschewing GMCÂ’s “Multi-Pro” branding for the bowtie vehicles. YouÂ’ll be able to option the tailgate on 2022 model year Silverado 2500HD and 3500HD models. ItÂ’ll be available optionally in every trim, so thereÂ’s no need to grab a more expensive trim to gain access to the trick tailgate — youÂ’re also not required to take it in higher trims. Functionality is the same as the standard Silverado and Sierra.  The primary gate opens and closes like any other tailgate out there. ThereÂ’s a primary gate load stopper that allows you to put the gate down and still keep things from flying out the back (it can also be arranged such that the load stopper is at a higher height by using the inner gateÂ’s stopper). The inner gate folds down perpendicular to the ground to allow closer access to the bed. A full-width step is available if you fold both “gates” down and pop out the inner panel. And lastly, the inner gate can be lowered to use it as a small work space. You can watch the short video above to get a quick run through of all the positions, or scroll through the gallery at the top of this post. Besides the tailgate, Chevy says the 2022 Silverado HD is gaining a new Greenstone Metallic exterior paint color. Other changes for 2022 were not detailed at this time, but Chevy says the trucks with this tailgate should be available sometime this summer. Related video: