2014 Gmc Sierra 1500 Slt on 2040-cars

Auto blog

GMC Sierra AT4X reportedly on the way, nameplate could be GMC's ZR2

In 2016, GM filed an application with Mexico's Institute of Industrial Property to reserve the name AT4X, and in 2019, the automaker made the same request to the U.S. Patent and Trademark Office. Seeing that GMC's current AT4 trim replaces the former All Terrain trim used on the last-gen Sierra pickup, there have been suspicions ever since those trademark filings that GM would use the AT4X name to replace GMC's former All Terrain X trim. GM Authority reports that this is precisely what's going to happen, citing "sources familiar with the matter." The outlet even gleaned an equipment group number: 4SG for AT4X, whereas AT4 is equipment group 4SB.  The surmise is that GMC is again developing its versions of Chevrolet's dirt-clobbering pickups that wear the ZR2 name. Spy shooters caught the GMC Canyon earlier this month trotting around on Multimatic's DSSV dampers and a set of 33-inch tires like its Colorado ZR2 sibling. The Canyon already offers an AT4 trim, it's thought this beefier setup will roll into the lineup as an AT4X.  Stepping up to the half-ton league, at the end of last month Chevy released a teaser for the Silverado ZR2, which had been caught in prototype guise (pictured at top) around Detroit on at least two occasions. We've mused that the production Silverado ZR2 could take some hardcore off-roader cues from the factory-upgraded Silverado ZR2 race truck like a lifted stance, long-travel front suspension, four-leaf springs instead of three-leaf, electronic locking front and rear differentials, and a wider track. One of the production prototypes was caught on 33-inch tires, but we wouldn't be shocked to see 35-inchers on the spec sheet. That size would match the race truck and the rubber fitted to the cross-town rivals Ford Raptor and Ram 1500 TRX. A GMC Sierra AT4X would be the plusher, pricier, chrome-ier version of the ZR2. The aforementioned Multimatic shocks could also be on the docket. We'd expect the GMC Sierra AT4X to bow with the heavily updated 2022 pickup, whenever that arrives. Events around the world of late delayed the pickup, its launch now thought to happen late next year or in early 2023. Related Video:  

2019 GMC Sierra CarbonPro Edition pricing starts above $65,000

GMC is hard at work building carbon fiber beds for its CarbonPro trucks, so it's fitting that the company has finally released pricing for the 2019 GMC Sierra CarbonPro Edition. It's not cheap by any measure. The most "affordable" for 2019 is the AT4 version starting at $66,635. It's also available in Denali trim, and that version starts at $70,020. Both represent an increase of $8,000 to $9,000 more over the base AT4 and Denali models. That may seem like a lot to go from a steel bed to a carbon fiber one, but you're getting more than the bed for that money. GMC also includes unique badging, a Bluetooth bed speaker, rear-camera mirror, surround vision cameras, automatic emergency braking, lane-keep assist, automatic headlights, power side steps, a sunroof, trailer tire pressure monitoring and a color heads-up display to both models. The AT4 specifically gets a Bose sound system, navigation, parking sensors and a cat-back exhaust, too. The Denali adds unique 22-inch wheels. Both only come with the 6.2-liter V8 and 10-speed automatic. To equip a regular GMC Sierra AT4 similarly to the CarbonPro Edition, the price comes out to $64,110. The Denali comparably equipped to the CarbonPro is $67,940. So the bed itself is about $2,000 to $3,000. The 2019 GMC Sierra CarbonPro Edition trucks should be reaching dealers very soon. They will soon be supplanted by the 2020 version, which will add the new 3.0-liter diesel inline-six as an engine option. The AT4 CarbonPro will get some extra black accents for 2020, too.

Next-gen Chevy Silverado and GMC Sierra may use carbon fiber

It's been generally accepted that the next generation of full-size GM trucks will use some sort of strong, lightweight material for the beds while retaining steel for the cab. While aluminum seems like the most obvious choice, according to Automotive News, the Chevy Silverado and GMC Sierra will incorporate both aluminum and carbon fiber in their beds. The publication cites sources from within GM, though it seems the introduction of this comparatively exotic material mix is still a few years off. While carbon fiber is both stronger and lighter than steel and aluminum, it takes significantly more time and money to produce, essentially relegating the material to small-volume cars. The main benefit for trucks is the resulting reduction in weight to improve fuel economy without sacrificing the tough, rugged capabilities truck buyers expect. The Ford F-150 made the switch to aluminum for the 2015 model year and it's proved highly successful. It seemed like it was only a matter of time before the competition followed suit. Automotive News says that the next-gen trucks will launch with aluminum beds and that it will take a couple of years before we'll see any carbon fiber incorporated into the design. Even then, only look for the composite material on higher-trim models, with a trickle down to lower-spec trucks possible further in the future. In 2011, GM announced it was working with Japan-based Teijin Limited on a carbon fiber reinforced thermoplastic. There's a good chance that material's introduction will be on trucks. Related Video: News Source: Automotive News Plants/Manufacturing Rumormill Chevrolet GM GMC Truck