2014 Gmc Sierra 1500 Sle on 2040-cars

Auto blog

Specialty Vehicle Engineering's 750-horsepower GMC Canyon fully revealed

GMC's celebrated Syclone will turn 30 in early 2021, but nothing suggests the company will mark the occasion by releasing a modern interpretation of the pickup. New Jersey-based tuner Specialty Vehicle Engineering (SVE) is taking the matter into its own hands by building a limited number of GMC Canyon trucks with Hellcat-like power. Although the original Syclone received a turbocharged V6, the 2021 model gains a 5.3-liter V8 normally found in bigger vehicles, including the Sierra and Yukon. SVE rebuilt it with forged aluminum pistons, forged steel connecting rods, high-lift valve springs, a custom crankshaft and upgraded fuel injectors among other aftermarket parts. It also added a supercharger to raise the eight's output to 750 horsepower and 600 pound-feet of torque. Power flows to the four wheels via a strengthened 8-speed automatic transmission and a permanent all-wheel-drive system. For context, the first Syclone gave the Chevrolet Corvette a run for its money with a fuel-injected, 4.3-liter V6 turbocharged to 280 horsepower and 360 pound-feet of torque. These numbers were spectacular in the early 1990s since the Sonoma that Syclone was based on shipped with the 105-horse Iron Duke four-cylinder as standard. Even compared with the Sonoma GT that got a naturally aspirated 4.3-liter V6 with 195 horsepower and 260 pound-feet of torque, the Syclone was impressive. SVE installed six-pistons front calipers that clamp 13.6-inch slotted rotors, and it kept the factory brakes out back. It also lowered the suspension by two inches in the front and five inches in the back, upgraded the shocks, and added a heavy-duty rear sway bar. These modifications help drivers make the most of the extra power, but SVE hasn't published performance specifications (like the truck's zero-to-60-mph time) yet. Surprisingly, the eight-cylinder weighs almost the same as the V6 it replaces so the engine swap doesn't affect weight distribution. Visually, the Syclone can't be mistaken for a run-of-the-mill Canyon. It wears a deep front bumper, has cladding over the rocker panels and rides on 20-inch alloys. Edition-specific emblems round out the look, and the list of options includes a body-colored grille as well as a folding tonneau cover. SVE's images show a truck painted black, which was the only color offered on the 1991 model, but it's available in any factory hue. Inside, the modern-day Syclone gains special floor mats and a numbered plaque on the dashboard. Leather is optional.

2018 GMC Yukon Denali gets a sculpted new grille

More than half of all GMC Yukon and Yukon XL models sold wear top-level Denali trim. That's a profitable scenario for the automaker, so, perhaps above all else, GMC needs its premium Denali series of vehicles to continue to stand out in a line of trucks and SUVs at the dealership lot. Hence, chrome, and lots of it. But for 2018, GMC is blessing the behemoth Yukon Denali with an added dose of class with a new multi-dimensional grille. "The new grille, which is flanked by HID headlamps and LED Signature Lighting, advances the design legacy established with the very first Yukon Denali in 1999," said Matt Noone, director of Global GMC Exterior Design. In addition to a sophisticated new look, the grille adds customizable cooling capabilities to the Denali range. Active shutters open when additional cooling is needed, or close to reduce aerodynamic drag when the engine isn't too warm. Further increasing the efficiency of the big brutish 'ute is a new 10-speed automatic transmission. That's two extra gears over the 2017 Yukon Denali, leading to a numerically lower final drive to help save fuel at highway speeds. Inside, Mastique Ash wood trim differentiates the 2018 model from previous years. A 420-horsepower 6.2-liter V8 engine remains standard for 2018, as do blingy 20-inch wheels with 22 inchers optional. Related Video: Design/Style GMC SUV Luxury gmc yukon denali

Regular-cab, short-bed Chevy Silverado Trail Boss pickup looks great

For all the wild popularity of full-size pickups, there's one configuration that U.S. buyers are no longer offered: the regular-cab, short-bed truck. Interestingly, however, GM still does make this configuration, and both the Chevrolet Silverado and the GMC Sierra are offered with it — in the Mexican market. That body style, however, is available solely in ultra-basic work-truck form. But a custom wheel shop, JC Wheels in the Mexican city of Culiacan, has converted one of these Silverados to Trail Boss trim, and we're digging the result. The sporty shorty Silverado Trail Boss comes to our attention via GM Authority, after the shop posted it on their Instagram feed. The shop added a 3-inch lift, assist steps, Chevy alloy wheels, a Trail Boss front fascia including red tow hooks, and Trail Boss badging. They also added dark window tint, which seems like a good idea in sunny Mexico. In the U.S., the Silverado Trail Boss isn't offered at all in regular-cab form; it only can be had as a double cab or a crew cab, the latter with a choice of a short bed or standard bed. But size is often a hindrance for trucks that actually get driven on trails, where this regular-cab, short-bed variant's smaller wheelbase would be an advantage. Beyond that, the Trail Boss upgrades keep this configuration from looking like a basic-spec machine. That's even more true of the same outfit's previous efforts: the conversion of the GMC Sierra regular-cab, short-bed pickup into a Denali. With so many buyers choosing pickups as personal-use vehicles, it's not hard to think that this configuration could find an audience here. But the key would be to do as this Mexican firm has done and offer it in the desirable off-road and luxury trims, rather than as a basic work truck. Would you buy one? Sound off in the comments below. The next step would be to use this configuration as the basis of a full-size, two-door SUV, in the mold of the classic Chevy K5 Blazer and GMC Jimmy.