2014 Gmc Sierra 1500 Sle on 2040-cars

Auto blog

2019 GMC Sierra 1500 prototype shows off differences from Silverado

Now that the new Silverado has made its debut, we're awaiting the reveal of its mildly restyled twin, the GMC Sierra 1500. While it likely won't be that different as far as capability and major equipment are concerned, we are looking forward to seeing what design changes it will have. Based on these recent spy shots, the changes will be mild, but still enough to make it visually distinctive. One of the more obvious differences will be in the front fascia treatment. Unlike the Silverado's grille that's level with the top of the headlights, the GMC's will rise above the lights, which will also yield a slight drop on each side of the hood to meet the lights. The grille is quite tall, extending far below the headlights, too. We can make out, behind some mesh, two dips on the outer edges of the grille that give the Sierra a more menacing frown. Large foglights are also found right near where the scoops for the wheel air curtains, and the headlights are unified on the edges, rather than split on the Silverado. Along the sides, the sheet metal looks relatively unchanged. At some angles, we can make out the distinctive shoulder line from the Silverado that runs up to about the rear mirrors where it stops to make room for another crease that rises up from somewhere in the middle of the front doors to lead to the front. The wheel arches are decidedly different from the Silverado's though. While the Silverado has fairly rounded arches, the Sierra's have a rear-slanted bevel to the fronts of the arches and a rounded 90-degree corner at the rears. There isn't much we can tell about the rear except for the taillights. They're quite large, and unlike the Silverado's, there aren't any areas where the sheet metal intrudes. It also appears that the tops of the taillights extend farther forward into the bed sides than the Chevy's. Because the Sierra has almost always been a mechanical twin of the Silverado, we expect it to offer the same 5.3-liter and 6.2-liter V8s, as well as the new 3.0-liter diesel inline-6. Also, being a GMC, it will likely have a flashy, chrome-laden Denali trim level. We also will see the fully revealed model soon, as Automotive News reports the debut will be on March 1. Related Video: Featured Gallery 2019 GMC Sierra 1500 spy shots View 39 Photos News Source: Automotive News Spy Photos GMC Truck chevrolet silverado

2021 GMC Yukon starts at $51,955, just $100 more than outgoing model

The 2021 GMC Yukon and Yukon XL have prices, and they're bargains considering the upgrades the new model delivers. The base Yukon SLE starts at $51,995 after the $1,295 destination charge, a $100 premium over the current model. The extended wheelbase Yukon XL in base SLE trim starts at $54,695, the same price as the outgoing model. The price for all-wheel drive stands pat for trims that make it an option, at $3,000. Prices for the two-wheel drive Yukon and Yukon XL trim steps are below, with price differences compared to the 2020 models. Keep mind that the new AT4 trim comes standard with AWD, so the AT4 is in a sense closer in price to the SLT and further from the Denali than it appears here: Yukon SLE: $51,995 (+ $100) Yukon SLT: $59,095 (- $810) Yukon AT4: $66,095  Yukon Denali: $69,695 (+ $800) Yukon XL SLE: $54,695 (No change) Yukon XL SLT: $61,795 (No change) Yukon XL AT4: $68,795 Yukon XL Denali: $72,395 (+ $600) The drop in price on the Yukon SLT is in comparison to the 2020 Yukon SLT Standard Edition trim, not the lower-spec SLT trim. The new Yukon comes in at $1,700 more than the 2021 Chevrolet Tahoe, the same price difference in effect between the Yukon XL and Suburban. The standard Yukon is powered by a 5.3-liter V8 with 355 horsepower and 383 pound-feet of torque, the same specs as found in both the Tahoe and Suburban. The Yukon Denali trims, as with the High Country trims on the Chevy twins, outdo the 5.3-liter with a 6.2-liter V8 making 420 hp and 460 lb-ft. Both engines shift through a 10-speed automatic. Stuffing a Yukon XL Denali with options can take the MSRP beyond $80,000, thanks to available features like the panoramic sunroof, rear seat entertainment, air suspension, and Magnetic Ride Control Suspension.   We're still awaiting pricing for the coming 3.0-liter Duramax inline-six with 460 pound-feet of torque, which we expect closer to the on-sale date for the new full-sized SUVs.  Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Bronco, Yukon, Hummer and a CES recap | Autoblog Podcast #610

GM 6.2L V8 claims most powerful light-duty truck engine title

General Motors has officially captured the horsepower crown for mainstream pickup trucks with its 6.2-liter V8. The big mill, available in both the Chevrolet Silverado and GMC Sierra, comes to market with 420 horsepower and 460 pound-feet of torque, handily outdoing its two cross-town competitors, Ram (5.7-liter V8, 395 ponies and 407 lb-ft) and Ford (6.2-liter V8, 411 hp and 434 lb-ft).
The new GM 6.2 will take a bit of an investment, though. Those that want the extra thrust will need to go with either the LTZ or High Country trims from the Chevy, or the SLT and Denali trims from GMC, which are the two highest trim levels for the respective vehicles. Trim levels aside, if you're in the business of towing, GM has you covered. Optioned with the 6.2-liter V8 and the Max Trailering Package, owners will be able to pull 12,000 pounds, a hugely impressive figure.
We still aren't certain as to what sort of economy the new engine will get, but it'll probably be a bad bet for the fuel conscious. As for availability, expect to see the 6.2-liter trucks in showrooms later in the fall.