2014 Gmc Sierra 1500 Base on 2040-cars

Auto blog

The Hummer EV Edition 1 is sold out and it'll be years before other trims arrive

When the 2022 GMC Hummer EV was revealed, GMC noted that there would be lower trims available. The company has since provided a few more details on those lower trims, which is helpful to know now that the only trim on sale next year, the Edition 1, was sold out in a scant 10 minutes. However, it's going to be a long time before they're all available.  The entry-level GMC Hummer EV is the EV2. This is the model that will start at $79,995, and unlike the Edition 1, it gets just two motors, one for each end of the truck, each with electronically locking differentials. Output is down to 625 horsepower and a torque rating of 7,400 pound-feet. Note that this and all other reported torque numbers are after the torque multiplication by the single-speed transmissions, hence the extremely high numbers. The company hasn't given torque numbers at the motors, which would be more comparable to other electric cars. Range is also reduced to 250 miles, probably due to a smaller battery pack. Fast charging is also restricted to 400-volt charging, so it won't be as fast as the higher trim models. The removable roof panels, retractable rear window, MultiPro tailgate, Super Cruise and 35-inch tires are standard. This model only gets fixed steel suspension and two-wheel steering. The EV2 will be the last of the trim levels to go on sale, with a target of spring 2024. Yes, as in 3.5 years from now.  The next level is the EV2X, which will be available a year earlier in the spring of 2023. It gets the same powertrain as the EV2, but adds 800-volt fast charging and a 300-mile range. It also gets the adaptive air suspension and four-wheel steering, plus the associated party tricks of Crab Mode and Extract Mode. This model costs $89,995. The earliest Hummer EV that isn't an Edition 1 and therefore not yet sold out will be the EV3X, the entry-level three-motor model. It goes on sale in the fall of 2022 at a price of $99,995. It's not quite as potent as the Edition 1, though, with an output of 800 horsepower and 9,500 pound-feet of torque. It also lacks the "Watts to Freedom (WTF)" launch control feature. But it does get torque-vectoring with the dual rear motors, which can also lock their speeds to be equal like with the mechanical locking differential at the front. The EV3X's range is 300 miles like the EV2X.  As for the Edition 1, it started $112,595 before it was sold out. Customers are to expect them in fall 2021.

2021 GMC Canyon trims overhauled, SL and SLT disappear

Until this year, the GMC Canyon has offered six trims in two drivetrains: SL, a base model simply called Canyon, SLE, All Terrain, SLT, and Denali, with all but the SL available in either 2WD or 4WD. GM Authority credits "dealer sources" for news that the 2021 Canyon has had its trim steps overhauled. According to the chart in the report, the SL and SLT are no more, the base Canyon gets replaced by a trim called Elevation Standard, and SLE turns into Elevation. We already know that All Terrain has given way to AT4, while Denali remains in the top spot. Trim content doesn't change with the names, but there's no equivalent for the SLT trim in terms of spec. The GMC site lists the 2020 SLE and SLT on the same page, and a shopper must burrow into the spec comparison page to figure out the differences. The SLT only comes with the 3.6-liter V6 and eight-speed transmission, and makes features like remote start, climate control, heated mirrors, heated seats, hitch guidance, and a spare tire standard equipment. It also chromes the exterior door handles, and offers a Cocoa/Dune leather interior that can't be had on the SLE. It's possible the SLT's $4,700 premium over the SLE led more buyers to start with the SLE and add the engine and options they wanted.   We have a number of questions that we'll need to wait for GMC's official announcement to answer. The 2020 Canyon offers an Elevation Edition package for $650 that adds a black grille with body-colored surround, and 18-inch Satin Graphite wheels in all-terrain rubber. There's also a California Elevation Special Edition for $1,195 with all-weather floor liners, assist steps, and mud flaps. They could be optioned on the SLE but not the SLT. With the addition of two Elevation trims, we'll find out if the packages get renamed or go away. Separately, CarBuzz spotted a 2021 GM Fleet Order Guide that mentions a leveling kit option, LPO Code SQS, for the Canyon and the Chevrolet Colorado. We noted the inclusion of a leveling kit in the coming Canyon AT4 Off-Road Performance Package. According to the order guide, the option can be ordered only for the Canyon AT4 trim, but it's not clear if that's an a la carte choice or if buyers must order the Off-Road Performance Package. On the Chevy, the rake-removal equipment can be had with the Colorado 4x2 Z71 or the 4x4 Work Truck, LT, and Z71. Related Video:

2020 GMC Acadia AT4 priced just a little more than the SLT trim

Cars Direct has seen the order guide pricing the 2020 Acadia AT4 at $42,495 after destination; that means a $41,300 MSRP plus $1,195 for shipping and handling. GMC has left a lot of pricing room between the rugged, all-wheel drive AT4 and the dressed-up, top-shelf Acadia Denali with AWD, the latter costing $49,495, a $7,000 difference. The spread's blown out some by what appears to be an $800 increase for the 2020 Acadia Denali with all-wheel drive. The 2019 model costs $48,695. On the other hand, it looks like the 200 Acadia SLT trim has gone down in price. Cars Direct says that model will run $41,995, which is $300 less than the 2019 version that goes for $42,295 after destination. The new price leaves a $500 gap between the SLT-1 model with all-wheel drive and the AT4 trim, a figure that's a no-brainer to justify for any buyers trying to get a more butch curb appeal.     The Acadia AT4 package comes standard with all-wheel drive and the 3.6-liter V6 with 310 horsepower and 271 pound-feet of torque, puts black chrome on the grille, and nabs a set of exclusive 17-inch wheels on all-terrain tires. The other two engines in the lineup are a new turbocharged 2.0-liter four-cylinder with 230 horsepower and 258 pound-feet of torque, and cylinder deactivation. That motor will be the standard kit on the SLT and Denali trim levels, supplanting the 3.6-liter that's standard on the 2019 models. The entry-level engine carries over, a naturally aspirated 2.5-liter four-cylinder making 193 horsepower and 188 pound-feet of torque.