2011 Gmc Sierra Ext Cab 4x4 Tx Edition 20'' Wheels 42k Texas Direct Auto on 2040-cars

Auto blog

2019 GMC Sierra 1500 prototype shows off differences from Silverado

Now that the new Silverado has made its debut, we're awaiting the reveal of its mildly restyled twin, the GMC Sierra 1500. While it likely won't be that different as far as capability and major equipment are concerned, we are looking forward to seeing what design changes it will have. Based on these recent spy shots, the changes will be mild, but still enough to make it visually distinctive. One of the more obvious differences will be in the front fascia treatment. Unlike the Silverado's grille that's level with the top of the headlights, the GMC's will rise above the lights, which will also yield a slight drop on each side of the hood to meet the lights. The grille is quite tall, extending far below the headlights, too. We can make out, behind some mesh, two dips on the outer edges of the grille that give the Sierra a more menacing frown. Large foglights are also found right near where the scoops for the wheel air curtains, and the headlights are unified on the edges, rather than split on the Silverado. Along the sides, the sheet metal looks relatively unchanged. At some angles, we can make out the distinctive shoulder line from the Silverado that runs up to about the rear mirrors where it stops to make room for another crease that rises up from somewhere in the middle of the front doors to lead to the front. The wheel arches are decidedly different from the Silverado's though. While the Silverado has fairly rounded arches, the Sierra's have a rear-slanted bevel to the fronts of the arches and a rounded 90-degree corner at the rears. There isn't much we can tell about the rear except for the taillights. They're quite large, and unlike the Silverado's, there aren't any areas where the sheet metal intrudes. It also appears that the tops of the taillights extend farther forward into the bed sides than the Chevy's. Because the Sierra has almost always been a mechanical twin of the Silverado, we expect it to offer the same 5.3-liter and 6.2-liter V8s, as well as the new 3.0-liter diesel inline-6. Also, being a GMC, it will likely have a flashy, chrome-laden Denali trim level. We also will see the fully revealed model soon, as Automotive News reports the debut will be on March 1. Related Video: Featured Gallery 2019 GMC Sierra 1500 spy shots View 39 Photos News Source: Automotive News Spy Photos GMC Truck chevrolet silverado

Cadillac XT5, XT6, GMC Acadia recalled for two issues

General Motors is recalling three model years of the Cadillac XT5 and XT6, and the Cadillac's GMC sibling, the Acadia. The first recall has to do with the rearview camera. On 2020- and 2021-model-year XT5s, XT6s, and Acadias optioned with Surround Vision, insufficient crimping for the coaxial cables could cause a degraded signal from the rear camera, or cause the signal to fail. With all passenger vehicles required to have a working rearview camera, that's not an ideal situation. Only crossovers with Surround Vision are affected. The population at issue counts 95,231 vehicles, build dates being: XT5s produced from May 1, 2019 to June 23, 2021 XT6s built from February 25, 2019 to June 24, 2021 Acadias built from May 6, 2019 to June 24, 2021  The automaker hasn't been informed of any crashes or injuries related to the problem, and will begin mailing letters notifying owners of the issue on November 7. The fix is a trip to the dealer to have the cables inspected and replaced if necessary. Concerned customers can contact Cadillac customer service at 800-458-8006 or GMC customer service at 1-800-462-8782, then refer to GM's recall number, N222378380. Alternatively, they can get in touch with the National Highway Traffic Safety Administration (NHTSA) Safety Hotline at 888-327-4236 (TTY 800-424-9153), or go to www.nhtsa.gov, and refer to campaign number 22V709000. Another recall concerns just the 2023 Cadillac XT5 and XT6 and 2023 GMC Acadia units that were built on August 9, 2022. That day, a printer in the Spring Hill, Tennessee, Assembly Plant malfunctioned, producing vehicle labels for the driver's side B-pillar with illegible tire size information. That's a violation of a subsection of Federal Motor Vehicle Safety Standard No. 110. Only 24 units are affected, the fix being a jaunt to the dealer for a label with readable information. Owners who don't want to wait until November for letters from GM can contact Cadillac customer service at 800-458-8006 or GMC customer service at 800-462-8782, and mention recall number N222381690. Or they can head to the NHTSA Safety Hotline at 888-327-4236 (TTY 800-424-9153), or www.nhtsa.gov, and refer to campaign number 22V708000.

2021 GMC Canyon AT4 Off-Road Performance Edition is ready to hit the trail

GMC introduced a more capable Canyon AT4 named Off-Road Performance Edition that gains modifications like skid plates and a beefier suspension. It can venture further off the beaten path, but it won't get there faster. Based on the AT4, which is already better suited to venturing into the woods than the standard Canyon, the Off-Road Performance Edition gains a taller suspension and loses its sizeable front air dam to offer a 30-degree approach angle. GMC knows adventurers will be tempted to put that figure to the test, so it also added skid plates made with 5/32-inch aluminum to protect the radiator, the front differential, the steering gear, and the oil pan. Full-length rock rails on both sides shield the rocker panels from expensive encounters with boulders and other obstacles. Finally, the Off-Road Performance Edition stands out from the AT4 with specific 17-inch wheels painted in gloss black, black AT4 logos, and black exhaust tips. 31-inch Goodyear Wrangler tires come standard. Changes in the cabin are limited to floor liners. Out back, the cargo box receives a spray-in liner. Don't look for Ram 1500 TRX-like performance, because it doesn't sound like GMC made any major mechanical modifications to the Off-Road Performance Edition. Power comes from a 3.6-liter V6 that sends 308 horsepower and 275 pound-feet of torque to the four wheels via an eight-speed automatic transmission and an automatic locking rear differential provided by Eaton. AT4 buyers can order a 2.8-liter Duramax turbodiesel four-cylinder with 181 horsepower and a stout 369 pound-feet of torque on tap for an additional $4,375, but there's no word yet on whether this fuel-saving engine will be available on the Off-Road Performance Edition, too. GMC's 2021 Canyon AT4 Off-Road Performance Edition will go on sale later in 2020, though pricing information hasn't been announced yet. For context, the standard AT4 costs $39,395 in its most affordable configuration.