2008 Gmc Sierra on 2040-cars

Auto blog

Chevy and GMC trucks get CNG option pricing

Chevrolet and GMC have clued us in to pricing of the bi-fuel option for the 2015 Silverado and Sierra 2500HD CNG and 3500HD CNG pickups: it starts at $9,500; we're still missing the rest of the pricing inferred by the word "starts," however. If you remember from the Chicago Auto Show introduction, the 6.0-liter V8 puts out 360 horsepower and 380 pound-feet of torque when drinking gas, 301 hp and 333 lb-ft when inhaling CNG.
Chevrolet figures that a bi-fuel Silverado HD is worth $2,000 in savings if driven 19,500 miles on CNG and 7,500 miles on gasoline in the span of a year, a recoup rate easily attainable to high-mileage fleet owners. It can be specced on double- and crew-cab pickups with single rear wheels, not on dualies.
The 2015 Chevrolet Express and GMC Savana short-wheelbase passenger and cargo vans also get CNG options, starting at $10,825 for the three-tank system, and $12,090 for the four-tank system that can only be had on the cargo hauler. You'll find a bit more info on all of the permutations in the press release below.

GM reportedly developing 2.5-liter turbo four-cylinder

General Motors is allocating a massive amount of resources to developing electric technology, but it's not forgetting about the gasoline-powered cars that make up the bulk of its sales. It's reportedly designing a new 2.5-liter turbocharged four-cylinder engine based on its 2.7. Citing "sources familiar with the matter," enthusiast website GM Authority wrote that the 2.5-liter four is "in [the] final stages of development," meaning it should be announced sooner rather than later (assuming the report is accurate). Technical details are few and far between as of writing. The publication learned that the 2.5 will be part of the Cylinder Set Strategy (CSS) family of engines and that it will be mechanically related to the 2.7-liter currently found in the Chevrolet Silverado 1500, among several other models. It will feature dual overhead camshafts. It's too early to tell which models the 2.5-liter four-cylinder will end up in, or how much power it will generate. The output will likely depend on the application. For context, the 2.7 delivers 310 horsepower at 5,600 rpm and 348 pound-feet of torque between 1,500 and 4,000 rpm in the Silverado. In the smaller Colorado, it provides anywhere between 237 and 310 horsepower depending on the trim level selected. While this is pure speculation, our crystal ball tells us the engine will end up powering crossovers. It's an easy deduction to make. We can't imagine it will be offered in the Silverado, and seeing it in the Colorado is unlikely because its entry-level engine develops 237 horsepower; there's likely not much of a market for a midsize truck with 200 or so horsepower. Putting it in the Corvette wouldn't make sense and the Camaro has nearly reached the end of its life cycle without a successor planned. This leaves us with Chevrolet's range of crossovers, like the Equinox, as well as their GMC-, Buick-, and Cadillac-branded counterparts. We're not discounting the possibility that the cars set to receive the 2.5 haven't been unveiled, but those are likely crossovers, too; the odds of seeing another big Chevy sedan are very, very low. General Motors hasn't commented on the report, and it hasn't publicly announced plans to expand its CSS family of engines. If the report is accurate, we should learn more about the new turbocharged, 2.5-liter four-cylinder engine in the not-too-distant future. Featured Gallery 2022 Chevrolet Equinox RS View 56 Photos Buick Chevrolet GM GMC

GM exploring ways to raise half-ton Duramax diesel tow rating

Lots of truck owners cheered when GM announced fuel economy numbers for the 2020 Chevrolet Silverado with the 3.0-liter Duramax diesel inline-six. Even after Ram let loose its EPA mileage ratings for the 2020 Ram 1500 EcoDiesel, the Chevy oil-burner still took the trophy. The victory was years in the making, GM engineers spending an entire four-year development cycle refining the LM2 Duramax to increase mileage. The tradeoff, as well all know by now, is towing; the Duramax in half-ton duty pulls a maximum 9,300 pounds in the Silverado. Rivals across town can do more, the Ford F-150 PowerStroke rated at 11,500, the Ram 1500 EcoDiesel game to pull 12,560. GM engineer John Barta told Muscle Cars & Trucks that more hauling chops could be on the way, explaining, "We’re actually looking at upgrading some of the materials around (the engine bay) to see if we can maybe raise our tow rating." Engine bay materials are at issue due to thermal complexities underhood. John Barta, GM's assistant chief engineer of diesel engine controls, said the Duramax's inline-six configuration allowed engineers to get emissions hardware like the combined selective catalytic reduction, diesel oxidation catalysts, and diesel particulate filter unit closer to the engine, where it heats up quicker, getting emissions down quicker. But that filter puts another heat source in those confines, enforcing a cap on the tow rating to keep the engine and other systems from overheating. "If you look under the hood," he said, "youÂ’ll see a significant amount of silver ‘moon tapeÂ’ around to make sure things arenÂ’t getting overheatedÂ… if we were to go up in higher towing, which we can, we start impacting the possibility of deteriorating some of the components.” There isn't much space for more grille, so swapping for a better grade of "moon tape" or a different kind of material could reduce engine bay heat, extracting a higher tow rating in the process.  It's important to note a point Barta's been making for months about the Duramax figures, though. "Even though itÂ’s nice to brag about big numbers, in reality, light duty customers are not towing that large with their trucks," and, "We do know that (95 percent) of our light duty customers donÂ’t tow over 9,000 pounds." On our First Drive of the 2020 Silverado diesel we called out the tow rating, but emphasized that the Chevy and GMC have more important challenges to overcome.