2008 Gmc Sierra 1500 K1500 on 2040-cars

Auto blog

2023 GMC Acadia prices reportedly up $1,700 thanks mostly to OnStar

Earlier this month, GM Authority reported that GM was making OnStar Connected Services mandatory across the GMC and Buick lineups. The inclusion would increase MSRPs by anywhere from $905 to $1,675, GM's rationale being a better customer experience over time. A spokesperson said, "This offering provides our owners with a full suite of OnStar and Connected Services for three years, providing them with more time to enjoy services such as remote key fob, Wi-Fi data and OnStar safety services. By including this plan as standard equipment on the vehicle, it provides more customer value and a more seamless onboarding experience." Although some GMC models are already priced with OnStar included, seems the rollout is still in progress. GMA said it got pricing for the 2023 GMC Acadia, the three-row midsize SUV costing at least $1,700 more than in 2022. While $200 of that is a price bump, the remainder pays for Connected Services. The entry-level 2023 Acadia SLE in front-wheel drive is said to start at $37,895. Adding all-wheel drive adds the same $2,300 in 2023 that it does now. At the other end, the Denali AWD with the 3.6-liter V6 caps the range at $51,695. The Acadia has been spared the increases of so many other models, GM only lifting its price by around $200 since it announced pricing for the 2022 model last summer. The Acadia gets minor changes for the coming year. Three new colors are Sterling Metallic, Ultra Blue Metallic, and Volcanic Red Tintcoat, all of which are cost options. They replace Cayenne Red Tintcoat, Midnight Blue Metallic, and Satin Steel Metallic. The SLT, AT4, and Denali also get a revised steering wheel with audio and cruise controls.

2021 Chevy Tahoe, GMC Yukon fuel economy and towing capacities go official

Most of the puzzle pieces have fallen into place with GM’s new full-size SUVs, but today we have fuel economy and towing to add to the picture. Numbers for the standard 5.3-liter V8 and upgrade 6.2-liter V8 are out, but GM has held back on the 3.0-liter turbodiesel inline-six for the time being. Those numbers are most likely not ready yet. Minor improvements and decreases are seen throughout the Tahoe/Suburban and Yukon/Yukon XL lineup. Because there are so many variants, weÂ’re going to just lay them out below for you. 5.3-liter V8 2021 Tahoe/Yukon 2WD: 16/20/18 2021 Tahoe/Yukon 4WD: 16/20/18 2021 Suburban/Yukon XL 2WD: 16/20/18 2021 Suburban/Yukon XL 4WD: 15/19/17 6.2-liter V8 2021 Tahoe/Yukon 2WD: 15/20/17 2021 Tahoe/Yukon 4WD: 14/19/16 2021 Suburban/Yukon XL 2WD: 15/20/17 2021 Suburban/Yukon XL 4WD: 14/19/16 As you can see, there isnÂ’t a whole lot of difference between two-wheel drive and four-wheel drive options. You can eke out an extra mpg here and there, but itÂ’s a penalty weÂ’d be happy to live with to have four-wheel traction. The biggest loser in all of this is highway mpg. Chevy has made the trucks bigger and added weight with the independent rear suspension, causing a decrease in fuel economy. For example, a 2020 Tahoe with the 6.2-liter V8 and four-wheel drive is rated at 14/22/17. The 2021 truck drops 3 mpg on the highway and 1 mpg in the combined rating. There are improvements to be found, though. A 2020 Suburban with the 5.3-liter V8 and four-wheel drive is rated 14/21/16. Fuel economy in the city goes up 1 mpg, but you lose 2 mpg on the highway and 1 mpg in the combined rating. ThereÂ’s a bit of give and take here, but at least a slight increase in city mpg has accompanied the greater loss in highway fuel economy. 2021-chevy-tahoe-chicago-01 View 12 Photos As for towing, the Tahoe/Yukon with the 5.3-liter V8 and two-wheel drive has a new 7,900-pound capacity, and the four-wheel drive model is rated at 7,700 pounds. Respectively, those are the best figures youÂ’ll get with the standard towing capacity. Opt for the maximum towing package, and the Tahoe/Yukon capacities go up to 8,400 pounds (two-wheel drive) and 8,200 pounds (four-wheel drive). The numbers all take slight cuts when you go for the 6.2-liter V8. Both the Suburban and Yukon XL offer similar or identical towing figures as their shorter counterparts do.

2019 GMC Sierra Denali MultiPro tailgate and CarbonPro bed explained

When the 2019 Chevy Silverado debuted at the Detroit Auto Show in January, GM's Mark Reuss promised that the new 2019 GMC Sierra would have some significantly different styling and features than its corporate sibling. Previously, the Sierra has been little more than a Silverado with new front and rear fascias and some extra chrome inside and out. Well, Reuss was right. In addition to new sheetmetal, the Sierra exclusively gets the slick MultiPro tailgate and CarbonPro carbon-fiber bed box The tailgate really is trick. At the debut, GMC had multiple demonstrations, with engineers walking us through all six different configurations. Like all Sierra tailgates, the MultiPro version uses an aluminum skin to reduce weight. It's easy to tell which tailgate is which, as the MultiPro has a distinct cutout in the middle where it can fold down or extend. It can be used to extend the bed, drop to allow easier access, provide a sort of workbench, or be used as a step to help get into the bed. Yes, there's even a handle. Ford who? The step itself can support up to 375 pounds, 75 pounds more than Ford's similar tailgate step. This tailgate really is unique to the Sierra and is standard on SLT and Denali models. That said, the power-operated tailgate from the Silverado won't be coming to the GMC. Chevy gets its own exclusive, too. The Sierra's other big exclusive is the carbon-fiber reinforced plastic bed box. CFRP replaces steel inside the bed though not on the fenders. The bed uses four pieces; one for the bottom, one in the back and two along the sides. This isn't a CFRP. There is no steel hiding underneath these panels. Just take a peek underneath. The bed is a composite that uses 1-inch carbon-fiber threads, not a weave. Sheets of CFRP are molded and quenched — a process where the plastic coagulates and solidifies, locking in the carbon fiber — in just 60 seconds. That allows GMC's supplier to crank out these much more quickly. The finish looks like black fiberglass, though an engineer said that this wasn't the final production version. The final model will have different textures in order to improve grip and keep things from sliding around. GMC is touting the material's dent and corrosion resistance, though it remains to be seen how well it holds up to cracking. A video at the reveal showed people going after it with hammers and cinder blocks, but in-person demonstrations weren't available.