2006 Gmc Sierra 1500 Crew Cab 143.5" Wb 4wd Slt No Reserve Heated Leather Bose on 2040-cars

Auto blog

Specialty Vehicle Engineering's 750-horsepower GMC Canyon fully revealed

GMC's celebrated Syclone will turn 30 in early 2021, but nothing suggests the company will mark the occasion by releasing a modern interpretation of the pickup. New Jersey-based tuner Specialty Vehicle Engineering (SVE) is taking the matter into its own hands by building a limited number of GMC Canyon trucks with Hellcat-like power. Although the original Syclone received a turbocharged V6, the 2021 model gains a 5.3-liter V8 normally found in bigger vehicles, including the Sierra and Yukon. SVE rebuilt it with forged aluminum pistons, forged steel connecting rods, high-lift valve springs, a custom crankshaft and upgraded fuel injectors among other aftermarket parts. It also added a supercharger to raise the eight's output to 750 horsepower and 600 pound-feet of torque. Power flows to the four wheels via a strengthened 8-speed automatic transmission and a permanent all-wheel-drive system. For context, the first Syclone gave the Chevrolet Corvette a run for its money with a fuel-injected, 4.3-liter V6 turbocharged to 280 horsepower and 360 pound-feet of torque. These numbers were spectacular in the early 1990s since the Sonoma that Syclone was based on shipped with the 105-horse Iron Duke four-cylinder as standard. Even compared with the Sonoma GT that got a naturally aspirated 4.3-liter V6 with 195 horsepower and 260 pound-feet of torque, the Syclone was impressive. SVE installed six-pistons front calipers that clamp 13.6-inch slotted rotors, and it kept the factory brakes out back. It also lowered the suspension by two inches in the front and five inches in the back, upgraded the shocks, and added a heavy-duty rear sway bar. These modifications help drivers make the most of the extra power, but SVE hasn't published performance specifications (like the truck's zero-to-60-mph time) yet. Surprisingly, the eight-cylinder weighs almost the same as the V6 it replaces so the engine swap doesn't affect weight distribution. Visually, the Syclone can't be mistaken for a run-of-the-mill Canyon. It wears a deep front bumper, has cladding over the rocker panels and rides on 20-inch alloys. Edition-specific emblems round out the look, and the list of options includes a body-colored grille as well as a folding tonneau cover. SVE's images show a truck painted black, which was the only color offered on the 1991 model, but it's available in any factory hue. Inside, the modern-day Syclone gains special floor mats and a numbered plaque on the dashboard. Leather is optional.

Next-gen Chevy Silverado and GMC Sierra may use carbon fiber

It's been generally accepted that the next generation of full-size GM trucks will use some sort of strong, lightweight material for the beds while retaining steel for the cab. While aluminum seems like the most obvious choice, according to Automotive News, the Chevy Silverado and GMC Sierra will incorporate both aluminum and carbon fiber in their beds. The publication cites sources from within GM, though it seems the introduction of this comparatively exotic material mix is still a few years off. While carbon fiber is both stronger and lighter than steel and aluminum, it takes significantly more time and money to produce, essentially relegating the material to small-volume cars. The main benefit for trucks is the resulting reduction in weight to improve fuel economy without sacrificing the tough, rugged capabilities truck buyers expect. The Ford F-150 made the switch to aluminum for the 2015 model year and it's proved highly successful. It seemed like it was only a matter of time before the competition followed suit. Automotive News says that the next-gen trucks will launch with aluminum beds and that it will take a couple of years before we'll see any carbon fiber incorporated into the design. Even then, only look for the composite material on higher-trim models, with a trickle down to lower-spec trucks possible further in the future. In 2011, GM announced it was working with Japan-based Teijin Limited on a carbon fiber reinforced thermoplastic. There's a good chance that material's introduction will be on trucks. Related Video: News Source: Automotive News Plants/Manufacturing Rumormill Chevrolet GM GMC Truck

GM is training more first responders for EV emergencies in the U.S. and Canada

GM is training more first responders to be able to handle emergencies involving electric vehicles. The automaker is "significantly expanding" its EV First Responder Training program in the United States and Canada as electric vehicle sales continue to grow. Its initiative will primarily focus on training firefighters and equipping them with the necessary knowledge about full electric vehicle technologies. GM says it's hoping to dispel misconceptions when it comes to handling EVs in emergency situations. One of those misconceptions is that water is dangerous around EV batteries — turns out the recommended way to put out lithium-ion battery fires is by using copious amounts of water.  Andrew Klock, a senior manager of education and development at the National Fire Protection Association (NFPA), said: "The best way for the public and private vehicle fleet owners to rapidly adopt EVs is to train firefighters and emergency responders on how to handle incidents involving battery powered vehicles. The fire service has had more than 100 years to gain the knowledge needed to respond to internal combustion engine fires, and it is critical that they are now educated on EV safety." The NFPA held trainings of its own that had benefited 300,000 first responders, but it believes more than 800,000 members of the community still need further training.   GM previously piloted the program in southeast Michigan, but now it's conducting training events across Michigan and in Fort Worth, Texas, as well. Later this summer, it's bringing the program to metro New York City and Southern California. Participants will have to attend four-hour sessions, with up to two per day, held in various venues, such as fire houses and dealerships. Interested first and second responders can register through the program's dedicated website and earn a certificate from the Illinois Fire Service Institute if they score higher than 70 percent on the learning assessment by the end of their training.  The automaker already has a few EV models on the market, including the Chevy Bolts, the GMC Hummer EV and the Cadillac Lyriq. It has huge electrification plans for the future, though, and training responders could help make potential customers more receptive to the idea of switching to electric vehicles. GM aims to launch 30 EV models by 2025 and to exclusively sell EVs ten years after that. Related video: Green Cadillac Chevrolet GM GMC Safety Electric