1995 Gmc Z71 on 2040-cars

Auto blog

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.

GM doubles miles open to its Super Cruise technology

DETROIT — General Motors said on Wednesday owners of certain vehicles equipped with its Super Cruise assisted driving system will now be able to use it on 400,000 miles (643,740 km) of North American roads, doubling the current operating area as Tesla and other automakers race to deploy hands-free cruising technology. GM's Super Cruise system, like Tesla's Autopilot system, is a driver assistance system, and does not enable true autonomous driving. Spurred by Tesla's aggressive deployment of Autopilot, and Tesla Chief Executive Elon Musk's promises of a more advanced "Full Self Driving" system, GM, Ford, Volkswagen and Mercedes-Benz are racing to deploy competing partial automation technology in major markets. At the same time, safety regulators are showing concern that drivers do not understand that Autopilot and similar systems are not designed to take over driving in every circumstance. The GM system's sensors and software allow a motorist to cruise with hands off the wheel on highways that have been mapped in detail. But the driver is expected to stay alert and ready to take over the car. GM uses technology to monitor the driver, and Super Cruise will sound alarms or slow the car to a stop if it detects that a driver is not responding. Starting later this year, GM plans to enable vehicles equipped with Super Cruise and the company's latest vehicle electronic system to operate hands-free on major, undivided highways in the United States and Canada, as well as additional miles of divided, interstate highways. Currently, Super Cruise operates only on interstate, divided highways. The expansion, enabled by wider digital mapping, will allow owners of properly equipped GM vehicles to cruise hands-free on stretches of Route 66 and the Pacific Coast Highway in the U.S. West or the Trans-Canada highway in Western Canada, GM said. Many of the new roads GM has mapped are in rural, heartland states where GM pickup trucks are popular. GM plans to offer Super Cruise as an option on its Chevrolet Silverado and GMC Sierra large pickups later this year. GM has said previously it intends to offer Super Cruise as an option on 22 models by the end of 2023. Depending on the model, Super Cruise costs $2,200 to $2,500 to add as an option. (Reporting by Joe White in Detroit; Editing by Matthew Lewis) Related video: Cadillac Chevrolet GM GMC Technology Super Cruise

GM Design shows another early Hummer EV sketch

Like a new mother who's still so excited about her one-year-old baby that she can't stop showing ultrasound photos, General Motors is so excited about its biggest new baby, the battery-electric GMC Hummer, that it can't stop showing off development design sketches. The off-road monster with the 200-kWh Ultium battery pack debuted online on October 21 last year. The next day, the GM Design Instagram page posted some of the Hummer's early "theme sketches" leading to the production version. These had a conceptual flair to them, but were rather restrained. A month later, GM uncovered a series of development renderings showing off a much wilder truck bursting with more angles than a geometry text book. The archives have opened up again with a new "ideation sketch," this one between the first believable sketches and the second truck that Master Chief and Doomguy share on their days off.  All three sets of drawings show similar three-box proportions, it's the details that got a ton of love. On this newest sketch, the fenders flare a touch more than on the production truck, but the wheel wells are cut with the kind of clearance found on a Baja 1000 Trophy Truck. Out back, save for the tow hooks, the rear end is totally different than production. The sketch puts illuminated Hummer script across a narrow tailgate flanked by small square, taillights housing six individual elements. Beneath that, a bumper-less rear end puts nothing more than a sloped bash pate between the truck and the rocks it's just scrambled over. To our eyes, this is the best blend of production-ready comfort from the first sketches and zoot suit angles from the second that we've seen so far.  First deliveries of the GMC Hummer EV Edition 1 are expected before the year is out. When we get a chance to absorb the truck in its native habitats, we'll know whether there's cause for disappointment at what could have been. If so, with all this hunger among the monied for something different, we feel like restomodders have been given the perfect head starts on custom rebodied Hummers that would make things right. Related video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.