1987 Gmc Sierria Classic1500 4x4 New 350 Engine Fi Rebuilt Transmission Like New on 2040-cars

Auto blog

NHTSA investigating nearly 750,000 GM models over non-deploying airbags

Nearly 750,000 vehicles built by Chevrolet, GMC, and Cadillac are the subject of a National Highway Traffic Safety Administration (NHTSA) investigation due to non-deploying driver-side airbags. While the investigation is ongoing, the agency believes the issue is likely due to rust particles that form on the inflator's connection terminal interface. The list of nameplates included in the investigation includes Chevrolet's Silverado, Tahoe, and Suburban, GMC's Sierra, Yukon, and Yukon XL, plus Cadillac's Escalade, Escalade ESV, CT4, CT5, and XT4. All of the potentially affected vehicles are 2020 or 2021 models, according to a bulletin published on the NHTSA's website. Investigators launched the probe in April 2021 after 15 consumers reported airbag-related issues, including nine who said an airbag malfunction light appeared in the instrument cluster. More alarmingly, the NHTSA is aware of six accidents that caused significant damage to the car's front end yet didn't trigger the driver's airbag. It adds that there are no fatalities linked to the issue, but there are six crashes and eight injuries reportedly blamed on it. No evidence suggests this problem is related to the millions of potentially deadly Takata inflators recalled over the past few years. General Motors is aware of the defect. It sent a technical service bulletin (TSB) to its dealers in March 2021 to address the aforementioned warning light. The note explains the issue is due to "rust particles in the connection terminal interface of the driver's airbag inflator." The company hasn't issued a safety recall yet, however. Whether it will partially depends on the NHTSA's findings. It's currently looking into the scope and the severity of the problem, and it wants to understand its implications on driver safety. Investigators will decide whether General Motors needs to recall the 749,312 cars that are part of the probe when they close their investigation. General Motors has already spent a significant amount of money replacing defective airbag-related parts in its cars. In November 2020, it was ordered by the American government to recall nearly 6 million pickup trucks and SUVs equipped with potentially dangerous Takata airbag inflators. It repeatedly argued that testing proved the inflators were safe, and it petitioned the agency four times starting in 2016 to avoid a recall, which cost an estimated $1.2 billion (about a third of its net income in 2020).

GM profits threatened by glut of pickups

Automotive News reports that General Motors may slash production or ramp up discounts in order to deal with an oversupply of pickup trucks. GM currently has more than double the standard supply of pickups, and the vehicles are threatening to dampen the automaker's profits for 2013. Typically, automakers try to sustain a 60- to 75-day supply of vehicles, but GM is currently loaded with a 139-day supply, as of last month. At the end of November, the automaker was sitting on 245,853 units.
The manufacturer says that it will adjust production accordingly before laying any incentives on the profitable pickups. Even so, there's some concern that the inventory swell could hurt the roll-out of the next-generation Chevrolet Silverado and GMC Sierra. GM actually began slowly stepping back production in August, but it's clear the company will take further action as it heads toward the end of the year and into the next. Analysts predict the automaker could reduce pickup manufacturing by nearly half in the first quarter of 2013.
That still may not be enough to keep GM from laying extra cash on the Silverado and GMC Sierra. While the company's incentive spending was down in November compared to the same month in 2011, both the Ram 1500 and Ford F-150 saw double-digit percentage increases in sales last month while the Silverado and Sierra numbers slid compared to a year prior. Incentive spending could help move more trucks and add some balance to the GM inventory surge.

GMC Canyon AT4 OVRLANDX concept previews potential Bison-like model

GMC is signaling a move into serious off-road territory with this Canyon AT4 OVRLANDX concept. As its name suggest, this one-off was put together as a demonstration of what an overland-style GMC midsizer could potentially look like, but a glance beneath the surface reveals the bones of what we expect to be the forthcoming Canyon AT4X.  While "AT4" has been trickling down through the GMC lineup for the past few model years, AT4X kicks the basic off-road formula up a notch, a la Chevrolet's Colorado ZR2, which gains extra underbody protection, locking front and rear differentials and Multimatic's phenomenal DSSV dampers.  GMC Canyon AT4 OVRLANDX Off-Road Concept View 23 Photos OVRLANDX takes that to the next level, borrowing (and building upon) cues from the even-more-rugged ZR2 Bison, including rocker panel guards, cast-iron control arms, a custom front bumper with an integrated winch, built-in front recovery points, wheel arch trim with integrated LED task lighting, and guy lines for protecting the windshield from low-hanging branches. The custom rear bumper is even from American Expedition Vehicles (AEV), with whom Chevy partnered to produce the Bison's unique exterior bits. Does that seem like a wink and nod to you? “We wanted to showcase GMC Canyon with this concept and punctuate GMCÂ’s commitment to premium, off-road capable vehicles,” said Buick & GMC Global Vice President Duncan Aldred. "Consumer reaction to this conceptÂ’s design will help us further serve the growing market of buyers leading authentic outdoor lifestyles." This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. To that end, they threw a few more goodies at the concept. In a way, the roof-mounted tent, awning, cooler and kitchenette are just there to disguise the fact that GMC will likely build a production pickup with much these same specs when the new model debuts for the 2023 or 2024 model year – or perhaps even sooner. While this concept is built around GM's existing 3.6-liter V6 powertrain, the redesigned Canyon is expected to be offered with just one engine: a 2.7-liter turbocharged four-cylinder lifted from the Silverado and Sierra pickups.  Rumors have pointed to a GMC variant of the Colorado ZR2 since the midsize pickup adopted the AT4 branding for its off-road variant.