2005 Gmc 3500 Box Truck on 2040-cars

Auto blog

2022 Chevrolet Silverado LT Trail Boss adds 3.0-liter diesel option

Order books just opened for the 2022 Chevrolet Silverado, which, in case you hadn't heard, is almost unchanged compared to the 2021 Silverado. The overhauled Silverado and GMC Sierra that we caught in spy shots several times last year and were expected to launch this year have been delayed. Until that pickup gets here, Chevrolet and GMC will add "Limited" to the names of the Silverado and Sierra. Fleet guides for next year's truck show the official model name as Chevrolet Silverado 1500 LTD. There are a few interesting features coming next year, though, like the Multi-Flex tailgate joining the options list for Silverado HD trucks. GM Authority also reports that the 2022 Silverado LT Trail Boss adds the 3.0-liter oil-burner with 277 horsepower and 460 pound-feet of torque as a third engine option, which should be a big treat for the off-roading crew. Whereas the GMC Sierra AT4 already offers the 3.0-liter diesel, the Silverado LT Trail Boss only offers the 5.3-liter and 6.2-liter V8s, both bolted to GM's ten-speed automatic transmission. Then there's the Custom Trail Boss that adds the 4.3-liter V6 as an option, and it and the 5.3-liter V8 only get 6-speed automatics. At the moment, Silverado trims that offer the Duramax charge a $1,045 for it over the 5.3-liter V8. If that gap holds true for next year, the diesel will just about evenly split the price difference between the LT Trail Boss with the 5.3 and the 6.2.   Elsewhere in the range, Driving.ca said Canadian fleet guides show the 4.3-liter V6 and lower-spec 5.3-liter V8 with Active Fuel Management (AFM) instead of Dynamic Fuel Management (DFM) disappearing from next year's base Silverado WT. To clarify, AFM only shuts off half the cylinders in certain conditions, whereas DFM constantly adjusts how many cylinders are firing all the time. As it stands, that would leave the 2.7-liter turbo four-cylinder as the only engine option. However, those other two mills were the only ones left in the lineup that shift through a six-speed transmission, making it possible that they'll rejoin the options list with at least two more gears to choose from. It's not clear if GM will sell the Limited models alongside the majorly upgraded 2022 Silverado. The automaker did just that a few years ago, selling the previous-gen truck as a Limited trim alongside the then-new, current-gen. It certainly wouldn't be the only company to do so, either.

2019 GMC Sierra carbon fiber bed: How it's made

FORT WAYNE, Ind. — The redesigned 2019 GMC Sierra has some pretty nifty features, and the one that has had the most attention is the MultiPro flipping and folding tailgate. But the Sierra also features the first-of-its-kind carbon fiber truck bed. It's interesting, of course, for its capabilities, such as being 62 pounds lighter than the all-steel box. It even adds more cargo volume since the material can be assembled and shaped differently from steel. As it turns out, the assembly process is cool, too, which we learned when GMC invited us to see the beds being made. Every GMC carbon fiber bed starts out as perfectly flat sheets of thermoplastic carbon fiber. The sheets consist of a mix of fibers and resins, a bit like the molded carbon fiber parts Lamborghini uses. The sheets are manufactured by Japanese company Teijin, which collaborated with GMC to develop the bed. They're all delivered to Continental Structural Plastics (CSP) in Fort Wayne, Ind., for construction into the actual bed. The company, a subsidiary of Teijin, makes a wide variety of composite and plastic parts for the car industry, including body panels for the C7 Chevy Corvette. The rectangular sheets are cut to shape and stacked up at a giant stamping press. Robots pick up sheets and slide them onto a conveyor that goes into a large oven. The heat softens the parts so they can be stamped. The large primary bed parts such as the base are stamped by CSP's enormous 3,600-ton press, and the smaller ones go through a 1,000-ton press. Each press can do different parts using different stamping dies, and CSP switches between dies to produce different batches of parts. After stamping, the parts roll out mostly ready for assembly, but there are rough edges that are trimmed off by water-jet cutters. These cutting machines also create holes for fasteners and for parts such as tie-down hooks and lights. The stamping process also provides the carbon fiber bed with a unique Easter egg. On the bottom of the base of the bed, there are two words: "Connors Way." This is a tribute to Tim Connors, who was the chief engineer of manufacturing at GM and a strong proponent of the carbon fiber bed. He was tragically killed in a motorcycle crash a few years ago. The words were added to honor him, and they were fortunately approved for production. There are some components to the bed that aren't stamped from the flat sheets of material.

GM phasing out light-duty 1500-series vans

In the market for a fullsize van but don't need a heavy-duty model? You're in the minority, and you're also out of luck. That's because there are barely any more fullsize vans on the market with gross vehicle weight rating of less than 8,500 pounds, the threshold that separates light- and heavy-duty vans.
According to PickupTrucks.com, neither the Ford E-Series, Ram ProMaster, nor Mercedes-Benz Sprinter are available in light-duty versions. Few of the Ford Transit configurations are, either, and now General Motors is discontinuing production of the 1500-series Chevy Express and GMC Savana.
Apparently light-duty versions accounted for just 23 percent of Express sales and only 7 percent of Savanas. Add to that the fact that these 1500 versions were the only ones using the old generation of engines and suspension, and that the Wentzville plant near St. Louis, Missouri, is trying to make room for the next Chevy Colorado and GMC Canyon pickups, and the fate of the light-duty GM van was sealed.