2 Doors Needs Some Tlc on 2040-cars

Auto blog

Junkyard Gem: 1990 GMC S-15 Jimmy 4x4

The General sold the GMC-badged version of the first-generation Chevy S-10 Blazer, known as the S-15 Jimmy or just the Jimmy, from the 1982 through 1994 model years. These trucks were based on the small S-10 pickup and sold well (until small trucks were forced to get bigger and less truck-like after the dawn of the Ford Explorer-inspired commuter-truck era), but they have become difficult to find in vehicle graveyards in our current century. Here's a '90 Jimmy 4x4 with red-primer paint job, found in a self-service yard on California's Central Coast last month. GMC shoppers could get the 1990 Jimmy as a rear-wheel-drive truck, but this one has the four-wheel-drive option that allowed Tahoe-bound skiers to skip the chain monkeys on the way to the slopes (the CHP, understanding that California drivers have a 95% mortality rate on snow or ice, requires chains or four-wheel-drive to get over Donner Pass when there's a hint of snow forecast). GM sold so many millions of small-block Chevrolet V8s that it made economic sense to use the same tooling to produce a V6 version. The result was this truck's 4.3-liter V6 that was three-quarters of the good old Chevy 350 (5.7-liter) V8 that powered so many Camaros, Chevelles and Impalas. The 4.3 didn't make smooth power, but it got the job done and held together quite well. This one was rated at 160 horsepower, good enough for the Jimmy 4x4's 3,512-pound curb weight. These days, though, used-truck shoppers insist on at least two tons of heft plus four doors. Some discount lot in Monterey or Salinas couldn't even get $999 for this truck, and so it ended up in the final stop before the cold steel jaws of the crusher. 1990 was the last model year for the two-door-only Jimmy; for 1991, the Jimmy came with a choice of two doors (for devil-may-care types) or four doors (for drop-the-kids-at-school types). I've always liked the look of the instrument panels on the early S-10s and its siblings; even though the designers had to work within strict budgetary limitations, they made the panels look interesting. This truck nearly made it to 170,000 miles before the end. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. So powerful with the 4.3 (the regular S-15 pickup still came with a 2.8-liter V6 as base equipment) that it could destroy a TV camera.

GM announces $7 billion Michigan factory investment, most going to EVs

GM announced a $7 billion investment in Michigan manufacturing, much of which is earmarked for EV production. Four sites are included, but the key elements are a new battery cell plant in Lansing and the conversion of GM's existing Orion Township facility to expand production of the forthcoming Chevrolet Silverado EV and its GMC Sierra sibling.  GM says it is the largest investment announcement in company history and that it will create 4,000 new jobs. It also says 1,000 jobs will be retained. "We are building on the positive consumer response and reservations for our recent EV launches and debuts, including the GMC Hummer EV, Cadillac Lyriq, Chevrolet Equinox EV and Chevrolet Silverado EV," said GM CEO Mary Barra.  GM says the Orion expansion and new battery plant will support an increase in full-size electric truck production capacity to 600,000 units. This is in addition to the Factory ZERO facility in Detroit that will also be constructing the electric Silverado and Sierra.  The Orion Township factory current builds the Chevrolet Bolt EV and EUV, and will continue to do so during the plant's conversion. GM did not indicate what will happen with the Bolts once that conversion is complete or whether all will continue to be built at Orion. They do not use the Ultium vehicle architecture. GM will build other EV models at three other factories that are under construction or being converted. They are located in Spring Hill, Tennessee, Ingersoll, Ontario, and Ramos Arizpe, Mexico. GM says that it will have the ability to produce 1 million electric vehicles by 2025. The Ultium Cells Lansing facility is a $2.6 billion joint investment by GM and LG Energy Solution. GM says it alone will create 1,700 jobs once fully operational by late 2024. It will join two other GM Ultium Cells battery factories currently under construction in the United States, one in Ohio and the other in Tennessee.  Not all of the $7 billion investment will be for EVs. It also announced $510 million of the total will go toward upgrading the Lansing Delta Township Assembly to produce the next-generation Chevrolet Traverse and Buick Enclave. Money will also go to upgrading Lansing Grand River Assembly.

Disabled man realizes dream of driving with converted pickup truck

A man with a devastating illness is mobile once again thanks to a heavily modified pick up truck. He hopes he can help others in his situation gain the freedom of mobility they need to lead a normal life. Chris Sauerbaum has a physical disability resulting from chronic inflammatory polyneuropathy, a form of muscular dystrophy where the sufferer's immune system attacks their nerves. Sauerbaum lost both of his legs and is bound to a wheelchair. After 11 years of trying, he finally has a vehicle that he can drive. "You might as well be driving a Lamborghini," Sauerbaum told the York Dispatch as the driver side door extended to a lift to accommodate Sauerbaum's wheelchair. "Everyone comes up and talks to you. You come out looking like a Transformer." It wasn't easy getting transportation that fit his needs. First he bought a Chrysler PT Cruiser, which wasn't large enough to handle the equipment needed to convert the car for a legless driver. In 2013, Sauerbaum and his wife Heather Sloat appealed to local businesses and friends for donations. They raised $10,000 and were able to put a downpayment on a GMC Sierra. The truck then underwent $91,000 worth of upgrades. It was completely outfitted for Sauerbaum, with a large lift to bring his wheel chair up to the driver's seat and joysticks doing the work of peddles and the steering wheel. New York's Office of Vocational Rehabilitation paid for the conversion. "Think of it as a big remote controlled car. An 8,000 pound R/C car," Sauerbaum told the Dispatch. After a week and a half of learning the controls, Sauerbaum was able to drive with confidence again. He will no long need to rely on his wife to get him two and from work, an 80-mile trip each day. Sauerbaum and Sloat hope to start a nonprofit called Drive for Independence that will assist other wheelchair-bound people with the costs of getting a converted vehicle that suits their needs. "It's just one piece of the puzzle to get people to work," Sloat told the Dispatch. Related Video: Weird Car News GMC Driving Ownership Truck Videos disabled ms