Find or Sell Used Cars, Trucks, and SUVs in USA

1990 Gmc Jimmy / K5 Blazer Type Full Size 4 X 4 Offroad on 2040-cars

Year:1990 Mileage:148000
Location:

North Hollywood, California, United States

North Hollywood, California, United States
Advertising:

  • 1990 GMC JIMMY 
  • Full size 4 x 4
  • SLX  Model
  • Clean title , current registration.
  • Californian Edison fleet Vehicle , registered as commercial
  • No rust, California Truck
  • 5.7 TBI Fuel Injected motor
  • 700R4  4 speed overdrive transmission
  • Air conditioning
  • ABS Brakes
  • Strait axel front end
  • 2" lift Pro Comp Springs
  • Bilstein shocks
  • 15" x 8" Weld alloy forged wheels
  • 33 x 12.50 tires
  • Warn front hubs
  • Trailer Hitch
  • Roll Bar
  • tuffy lock box center counsel
  • 1000 watt Alpine stereo
  • Dual Batteries
  • Flowmaster exhaust
  • Skid plates on differentails, transfer case, and gas tank.
  • Used sold as is / no refunds / no returns /  you are bidding on a 24 year old 4 x 4 offroad truck.
  • Buyer picks up / pays balance in cash at time of transfer
  • Truck is located in North Hollywood California, one mile from Universal Studios.
         Overall the condition of the truck is good.  Most everything has been replaced or rebuilt, Brakes, Suspension,Transmission, Transfer case, Drive shafts
         ect.. The 350 Motor has good compression and recently passed smog.   The body is in good shape with no rust.  There is a small dent in the right rear
         from backing into a tree.  Paint is in fair condition has a few spots that need attention.  The interior is acceptable but shows signs of wear.  Original                 seats ft and rear.  Tuffy lock box.  Roll Bar.    There is a 1000 watt stereo that cranks  Original spare wheel with 33x9.50 BFG and High lift jack.
        This Truck runs strong with plenty of torque, it's been my daily driver.  

       

         
         

Auto Services in California

Zube`s Import Auto Sales ★★★★★

New Car Dealers, Used Car Dealers, Wholesale Used Car Dealers
Address: 225 Tank Farm Rd Ste B2, Shell-Beach
Phone: (805) 541-9823

Yosemite Machine ★★★★★

Auto Repair & Service, Automobile Machine Shop, Engine Rebuilding & Exchange
Address: 229 Empire Ave, Ceres
Phone: (209) 578-5654

Woodland Smog ★★★★★

Auto Repair & Service, Automobile Inspection Stations & Services, Gas Stations
Address: 208 Main St, Knights-Landing
Phone: (530) 662-5253

Woodland Motors Chevrolet Buick Cadillac GMC ★★★★★

Auto Repair & Service, New Car Dealers, Automobile Parts & Supplies
Address: 1680 E Main St, North-Highlands
Phone: (888) 969-7133

Willy`s Auto Service ★★★★★

Auto Repair & Service, Automobile Body Repairing & Painting
Address: 7542 Warner Ave # 104, Midway-City
Phone: (714) 842-3161

Western Brake & Tire ★★★★★

Auto Repair & Service, Brake Repair, Tire Dealers
Address: 801 E Ball Rd, Rowland-Heights
Phone: (714) 533-1152

Auto blog

Chevy Tahoe-to-K5 Blazer conversion shop renders Jimmy option

Sat, Feb 20 2021

Back in 2019 we told you about a truck that looked like a K5 Chevy Blazer, but was actually a modern late-model Tahoe underneath. It was the product of Arkansas shop Flat Out Autos, which reskinned modern GM full-size SUVs to look like their predecessors. Now, the same shop is planning to release a GMC version, converting Yukons to Jimmys. We were impressed by Flat Out's workmanship, beautifully blending the lines of the Blazer into those of the Tahoe. The result was a cohesive design, not just a panel swap. It clearly required a lot of work, which helped justify the $69,000 price tag, not including the cost of the donor Tahoe. FlatOut Autos GMC Blazer Tahoe reskin 01 View 11 Photos At least one new owner was so impressed that they recently purchased four identical Blazer conversions at once. The quadruplets were all finished in blue with a white roof and all based on brand-new 2020 Tahoes. Obviously, with such demand it was only natural for Flat Out to explore other options. On Facebook the company said it was working on a 1972 version with an eggcrate grille. Now, they've also released a rendering paying homage to the K5 GMC Jimmy. The Jimmy conversion uses the original's quad-headlight face, crosshair grille and GMC badging. Like the Blazer conversion, it adds chrome bumpers and milled door handles while adapting the original's 2-door design to the new truck's 4-door body. The rendering only shows the front three-quarter view, but presumably a new carbon fiber rear door would have to be created as the Blazer's says "Chevrolet" across the back. Flat Out says that all the modern conveniences found on the donor Tahoe will work on the conversion, including parking, blind spot and lane keeping sensors. If you have the coin, it's a great way to have retro style without giving up modern safety and performance. The new Blazer has been disappointing to many fans that had hoped for a Bronco-like SUV. Instead, GM gave us a crossover. The Flat Out conversions might be a good compromise, and expanding it to the GMC brand only makes sense. Obviously there's no requirement to use a GMC Yukon as the donor vehicle for the Jimmy, as it's functionally identical to a Tahoe, but wouldn't you want to keep it in the family? Related Video:

GM's redesigned full-size 2021 SUVs face delay over coronavirus

Tue, Mar 31 2020

As General Motors works to conserve cash for the coronavirus pandemic, the automaker reportedly told suppliers that it is postponing development of several future vehicles. The situation may cause GM to delay the launch of the 2021 Cadillac Escalade, GMC Yukon, Chevrolet Tahoe and Chevrolet Suburban SUVs, which had been planned to roll out in April. The original launch plan for the redesigned full-size SUVs, which are some of the most profitable vehicles produced by GM, had called for production of the current models to end at its plant in Arlington, Texas, this week. After a retooling process, the redesigned SUVs were slated to begin production late in the month of April. In an email to suppliers viewed by Reuters and confirmed as authentic by GM, the automaker also said it was suspending development work on six future vehicle programs, including updates of the Chevrolet Equinox, GMC Terrain, Cadillac XT4, Bolt EV, Chevrolet Silverado and GMC Sierra. GM said preproduction work on those programs would be pushed back to calendar year 2021, with most of the updated vehicles scheduled to be launched as 2022 models. According to the Detroit News, work has also been paused on the Chevy Camaro and a future version of the Corvette that has yet to be unveiled and wasn't planned for production during the 2020 calendar year. Last week, the automaker told employees and suppliers it was delaying work on some future vehicles while pushing ahead with near-term models such as its redesigned full-size SUVs and the GMC Hummer EV, Cadillac Lyriq, Chevrolet Bolt EUV and Cruise Origin, as well as its new Ultium battery system. A GM spokesman who spoke with Reuters reiterated on Monday what the automaker had said last week — that the situation with its U.S. plants was "fluid" and that the automaker would "continue to evaluate" whether and when to reopen those plants on a week-by-week basis, with "employee safety" guiding that decision. GM said previously that it was closing most of its U.S. plants indefinitely. In its Monday email, GM asked suppliers to stop work on all pre-production tooling and pre-production parts manufacturing, but also not to dispose of any tooling or materials. GM told Reuters it had solicited volunteers from its workforce to finish the build-out of the current SUVs on a single shift in Arlington.

2021 GMC Canyon AT4 Road Test | The everyday tool

Wed, Nov 11 2020

Bold take: The GMC Canyon is the most well-rounded midsize truck. Admittedly, “well-rounded” is a lukewarm compliment, but the Canyon does nearly everything well. It is not the flashiest, which is undeniably the Jeep Gladiator. Or the most comfortable, which is the Honda Ridgeline. But for those seeking a midsize truck that looks like a truck, drives like a truck and has a solid interior, the Canyon is the right formula. We would test the 2021 GMC Canyon AT4 for a week and find that itÂ’s pleasant, capable and sturdy off-road. We would haul a bookshelf in the bed, get dirty during a woodsy soft-road jaunt and pile up the miles running around town. In short, itÂ’s exactly what most need in a midsize truck.  The AT4 model is new for 2021, and it replaces the All-Terrain model, a move GMC is rolling out across its lineup. The AT4 adds an off-road-tuned suspension with hill-descent control, beefy 31-inch Goodyear Wrangler DuraTrac tires wrapped around 17-inch aluminum wheels, standard four-wheel drive with locking rear differential and a transfer case skid plate. The AT4 punches up the CanyonÂ’s appearance with red tow hooks, dark chrome elements and a bigger grille thatÂ’s similar to the SierraÂ’s. The Canyon Denali, which was also refreshed for ‘21, is showier, but the AT4 trim feels cooler with its understated off-road vibes. Considering this, we head out for an afternoon drive along a familiar route through DetroitÂ’s northern suburbs. The Canyon is a solid daily driver. The 3.6-liter V6 rated at 308 horsepower and 275 pound-feet of torque is widely used in General Motors vehicles. ItÂ’s powerful and actually sounds pretty good — even throaty — in GMCÂ’s midsize truck. Our passengers are surprised to be pulled back in their seats during hard acceleration, and the eight-speed automatic transmission is well-calibrated for the many jobs the Canyon is called upon to perform. This powertrain, standard in the AT4 and Denali trims, is a step up from the 2.5-liter inline-four and six-speed auto offered on the lower models. ItÂ’s worth it. The 2.8-liter Duramax diesel is an option on higher-spec Canyons, and its 369 lb-ft of torque is tantalizing. For everyday use, take the V6. Our tester with the gasoline V6 and four-wheel drive can tow as much as 7,000 pounds, has a maximum payload of 1,609 pounds and has respectable fuel economy of 17 mpg in the city and 24 mpg on the highway.