1979 Gmc Jimmy Chevy Blazer on 2040-cars

Auto blog

GM, Pilot will build EVgo fast chargers at 500 truck stops across U.S.

All of our maps showing electric vehicle charging stations across the U.S. are going to need an update. Today, General Motors, Pilot and EVgo announced plans to work together on a nationwide DC fast charging network. The plan calls for 2,000 charging stalls that can deliver up to 350 kW to be installed at up to 500 Pilot and Flying J travel centers in the U.S. The goal is to have DC fast chargers available in 50-mile intervals across the country. The new charging stations will feature GM's "Ultium Charge 360" branding and "Pilot Flying J" logos but will not be limited to drivers of GM EVs. The plugs will use CCS connectors and be available to anyone. GM EV owners can take advantage of benefits, including the ability to make exclusive reservations, get discounts on charging costs and streamline the charging process with Plug and Charge and in-vehicle apps that can provide real-time charger availability. The first installation phase will take place in 2023, and "the bulk of the installations" should be completed by 2025, EVgo CEO Kathy Zoi said during a conference call with reporters announcing the plan. "We're gonna get going immediately and commence all of that engineering and planning stuff," she said. "We've got a pretty orderly plan." Pilot CEO Shameek Konar said the company expects the new EV charging stations to coexist with the current fuel infrastructure. "An average Pilot Flying J location is about 10 acres," Konar said. "This will be in addition to all of our gas pumps. The way I think about it is, this is a new source of energy that is going to coexist with gas for quite some time. We can debate how long, but we need to serve both groups of customers." Installing DC fast chargers at hundreds of Pilot's travel centers — aka truck stops — means there should be food, drinks, restrooms, WiFi and even showers available while you wait for an EV to charge. Pilot recently announced its “New Horizons” plan that will invest $1 billion in upgrading Pilot travel centers with more premium amenities, including expanded seating and lounge areas. While the exact amount of time it will take to charge an EV using these new stations will vary on the EV and its current state of charge, most EVs can refill from a low state of charge to around 80 percent in 20-30 minutes on a fast charger. The new stations are future-proofed to deliver up to 350 kW, a charge rate that few EVs today can handle.

GM tells owners not to use SUV wipers due to fire risk

General Motors is recalling 31,685 examples of the 2016 Buick Enclave, Chevrolet Traverse, and GMC Acadia because a short circuit in the windshield wiper motor can potentially lead to a fire. Due to the danger, the company is asking owners not to use the wipers until the problem is fixed, according to The Detroit Free Press citing the Associated Press. A manufacturing defect in the wiper motor cover means that the electrical terminals can come into contact and cause a short. The part could "melt, smoke, or catch fire," according to a statement from GM. The company will get them fixed immediately, and dealers will replace the cover. If there's bad weather at the time the owner specifies to get the recall work completed, the automaker will come pick up the crossovers. Depending on parts availability, the automaker will supply a rental car for customers, as well. The issue was discovered at the factory. According to the company's statement, only 6,405 actually made it to customers, and they were notified immediately by overnight letter. The rest were in dealer stock. The affected crossovers carry build dates between August 18, 2015 and September 24, 2015. Of those, there are 29,295 in the US and 1,073 in Canada. GM Statement: General Motors has told the National Highway Traffic Safety Administration that it will recall approximately 29,295 2016 model year Chevrolet Traverse, Buick Enclave and GMC Acadia SUVs in the U.S. because the front windshield wiper motor may overheat when in use because of a manufacturing defect. In some cases, the front windshield wiper motor cover may melt, smoke or catch fire. The approximately 6,405 customers who have taken delivery of these vehicles were notified by overnight letter and are urged to contact a GM dealer as soon as possible to arrange a service appointment. These customers should not use the front windshield wipers until they have been repaired. If weather conditions prevent driving the vehicle without using the windshield wipers, GM will arrange to pick up the vehicle for servicing. If repair parts are unavailable, GM will provide a rental car at no cost until parts become available. The total population, including Canada, Mexico and exports, is approximately 31,685. About 25,280 of these vehicles are in dealer stock and will not be sold until repairs are made.

Next-gen Chevy Silverado and GMC Sierra may use carbon fiber

It's been generally accepted that the next generation of full-size GM trucks will use some sort of strong, lightweight material for the beds while retaining steel for the cab. While aluminum seems like the most obvious choice, according to Automotive News, the Chevy Silverado and GMC Sierra will incorporate both aluminum and carbon fiber in their beds. The publication cites sources from within GM, though it seems the introduction of this comparatively exotic material mix is still a few years off. While carbon fiber is both stronger and lighter than steel and aluminum, it takes significantly more time and money to produce, essentially relegating the material to small-volume cars. The main benefit for trucks is the resulting reduction in weight to improve fuel economy without sacrificing the tough, rugged capabilities truck buyers expect. The Ford F-150 made the switch to aluminum for the 2015 model year and it's proved highly successful. It seemed like it was only a matter of time before the competition followed suit. Automotive News says that the next-gen trucks will launch with aluminum beds and that it will take a couple of years before we'll see any carbon fiber incorporated into the design. Even then, only look for the composite material on higher-trim models, with a trickle down to lower-spec trucks possible further in the future. In 2011, GM announced it was working with Japan-based Teijin Limited on a carbon fiber reinforced thermoplastic. There's a good chance that material's introduction will be on trucks. Related Video: News Source: Automotive News Plants/Manufacturing Rumormill Chevrolet GM GMC Truck