2014 Gmc Acadia Denali on 2040-cars

Auto blog

GMC Sierra Denali CarbonPro bed is finally, almost here

GMC revealed the Sierra 1500 with the optional CarbonPro bed on March 1, 2018. The bed wasn't available at launch, though. You can't buy it now, either, but it will hit dealerships with limited availability after production starts in early June, exclusively for the Denali 1500 and AT4 1500 trims. The carbon floor and sides replace the steel panels in a normal bed, providing "strength, durability, and scratch resistance" and a potential 59-pound weight saving, depending on the truck's configuration. To make sure the bed had a chance, development engineers replicated "extreme use scenarios" like dropping 1,800-pound gravel loads, 450-pound steel drums, and cinder blocks from various heights. They put a 250-pound man on a snowmobile with studded tracks, had him drive into the bed and then go wide-open throttle. We're told the result was "minimal scratching." On top of the extreme weather testing any vehicle goes through, the team also put a generator in the bed and aim the exhaust into a corner to ensure vibration and direct heat wouldn't deform the carbon fiber. Because of the finer shaping area-specific strength possible with carbon fiber, the bed provides one cubic foot of additional payload space by having its sidewalls pushed further out. The CarbonPro bed doesn't need a bedliner, and is grained at the top for better traction but smooth on the bottom for easier hosing down and dirt removal. Tie-downs at the front of the bed work with molded indentations to hold motorcycle tires, and slots in the sidewalls hold two-by-sixes. The truck maker says the carbon-lined payload area confers "best-in-class dent, scratch and corrosion resistance," but we suppose the nation's pickup truck army will prove that or not. The trucks likely won't have the hardest life at the start, since the Sierra Denali costs $56,790 before even a basic option like four-wheel drive. The real test probably won't come until around 2029, when third owners begin treating their aerospace-inspired thoroughbreds like dray horses.

GM recalls trucks and SUVs for brake pedal problem

The Basics: General Motors will recall over 473,000 North American examples of the 2015-2016 Chevrolet Silverado HD, GMC Sierra HD, and police pursuit versions of the Chevy Tahoe. These include 426,573 vehicles in the US and 46,837 in Canada, according to Reuters. The Problem: The brake pivot nut can loosen over time, which can render the pedal inoperative. This would be a danger to drivers trying to stop the vehicles. In some cases, the "Service Engine Soon" light might come on. Injuries/Deaths: None reported. The Fix: Dealers will inspect the pivot bolt, and if necessary they will apply adhesive to it and reinstall the part with increased torque. If You Own One: "We expect to start customer notifications shortly," GM spokesperson Tom Wilkinson told Autoblog. Related Video: Transport Canada Recall # 2016053 Recall Date 2016/02/04 Notification Type Safety Mfr System Brakes Manufacturer Recall Number 20760 Units Affected The number of vehicles or components affected by the recall. 46,837 Category Light Truck & Van, SUV Recall Details On certain Heavy Duty and Police Pursuit vehicles, the brake pedal pivot nut may become loose, causing the brake pedal to be loose or inoperative. If the brake pedal becomes loose or inoperative, it could interfere with the accelerator pedal, and/or the driver may be unable to safely stop the vehicle through application of the brake pedal, potentially affecting stopping distances and increasing the risk of a crash causing injury and/or damage to property. Correction: Dealers will inspect the pivot bolt installation to determine whether the vehicle has already received the production remedy. If not, the dealer will add adhesive to the nut, and reinstall the nut at an increased torque. Note: This condition may result in the "Service Engine Soon" light illuminating, and brake lights may stay on longer than expected. Make Model Model Year(s) Affected CHEVROLET SILVERADO 2015 2016 CHEVROLET TAHOE POLICE PURSUIT VEHICLE 2015 2016 GMC SIERRA 2015 2016

2024 GMC Canyon AT4X AEV teased on 35-inch tires

Last month, Chevrolet Performance teased the 2024 Colorado ZR2 Bison, which will be the ultimate hardcore off-road variant for that model developed in collaboration with American Expeditionary Vehicles (AEV). Since that camouflaged preview appeared, we've welcomed debuts of the competition, the 2024 Ford Ranger Raptor and 2024 Toyota Tacoma TRD Pro. Bookending a solid month of 4x4 delights, GMC teased the coming 2024 Canyon AT4X AEV. We can look at this as the GMC version of the Colorado ZR2 Bison, the Canyon's new-for-2024 AT4X trim given an additional boost in spec and capability. This isn't the truck's first flirt with the public. During media drives for the 2024 Sierra HD AT4X, one of the new heavy duty rigs showed up to the site pulling a trailer bearing a covered pickup. The mid-size form factor, 35-inch tires, and appearance at a GMC event were clues enough to the pickup's identity.  The official preview is proof of what we've been expecting. The revised front fascia wears a high-clearance bumper. Don't expect that winch to be included; the red hook in the tease is a digital add-on. You can expect the winch opening, boron steel underbody skid plating, and Multimatic dampers. The standard AT4X got a three-inch lift over the non-hardcore Canyon variants, in part thanks to being fitted with 33-inch tires. The 35-inch Goodyear Wrangler Territory MT 315/70 17 tires on the AT4X AEV are thought to help provide 11 inches of ground clearance. Beefier wishbones and hydraulic bump stops help protect owners who want to test limits. Reports by folks who walked around the covered truck predict a set of beadlock-capable AEV Salta wheels like the kind sold with the full-size Sierra AT4X AEV Edition. The cover couldn't hide the sport rack in the bed nor the bed-mounted spare tire carrier. Those, like the winch, are likely options that add to the price. Don't be surprised if engine output is unchanged. The 2.7-liter H.O. turbocharged four-cylinder makes 310 horsepower and 430-pound feet of torque. We'll never complain about more, but that's plenty for a truck envisioned as a low-speed obstacle crosser.  All GMC is saying for now is, "An even more off-road capable Canyon is coming." It debuts on July 6. Related video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.