2014 Gmc Acadia Denali on 2040-cars

Auto blog

GM Ultium tech can scavenge heat from everywhere, even you

GM likes to give us tidbits about its Ultium platform from time to time, and today it’s telling us about the platformÂ’s ability to capture waste heat from the propulsion system. In addition to capturing from the propulsion system, it can also capture humidity from both inside and outside the vehicle and even from passengersÂ’ body heat. Yes, you, your family and/or your friends are a usable heat source as far as GM EVs are concerned. It then deploys the heat in an advantageous way. If at this point, youÂ’re screaming, "Heat pump!" youÂ’d be right. WeÂ’re talking about an elaborate heat pump system that GM is using for its Ultium-based vehicles. Every Ultium-based GM vehicle gets this system that is covered by 11 patents and four publications. The waste heat it collects is used in a number of ways, but its primary use is to heat the cabin quickly and efficiently. GM claims it can heat the cabin of its Ultium-based vehicles quicker than vehicles with traditional internal combustion engines. Plus, when put to use, GM claims that using the heat pump provides its EVs with up to 10% more range than theyÂ’d have without. Beyond heating the cabin, the heat pump is capable of putting waste heat to use by preheating the battery prior to charging so that you can charge quicker. The system can even cool the propulsion system in preparation for Watts to Freedom (WTF) launch control starts. GM says this was vital in helping the Hummer EV achieve its bonkers 0-60 mph time of about 3 seconds. “Having a ground-up EV architecture gives us the freedom to build in standard features like UltiumÂ’s energy recovery capabilities,” said Doug Parks, GM executive VP of global product development, purchasing and supply chain. “This helps us squeeze more efficiency, performance and overall customer benefit out of our EVs.” GM says itÂ’s been developing heat pump technology since the EV1 and its heat pump. This is the modern evolution of that technology, and GM says itÂ’s going to be implemented in every Ultium-based vehicle as a standard feature. Related video: Green Cadillac Chevrolet GM GMC Technology Electric Future Vehicles

2022 GMC Sierra Super Cruise First Drive | Now with trailering and automatic lane-changing

Although the updated late-model year 2022 GMC Sierra is still a little ways off (In fact, it hasn't even been revealed), we've had an opportunity to try one of its headlining features: Super Cruise. But it's not quite the Super Cruise you know from the current Cadillac line. The new Sierra will be getting a newer version with two features: the ability to execute lane changes and passes automatically, and the ability to operate with a trailer. We tried the system at GM's proving grounds in Milford, Mich., and our test vehicles were 2022 Sierra prototypes. Though the trucks themselves are early examples with features not finalized, GMC representatives said the Super Cruise system is pretty much finished. The system uses close and long-range radar sensors at the front and a new set of radar sensors at the back, plus the truck's various cameras. It also utilizes the mapping data that GM has accumulated for the system to ensure it operates on approved roads and has detailed information about where the car is. Now, the first new feature enabled by the updated Super Cruise is the automatic lane-change system. The current system can change lanes on its own, but it must be prompted by a press of the turn signal. That feature remains intact, but now, if you approach a slower vehicle on a multi-lane highway, Super Cruise can check the lane next to you to see if it's safe to merge, change lanes, and then return to the original lane once the slow-moving vehicle has been passed. This is where those rear radar sensors come in. We tried it three times on GM's big banked oval course, and it did it impressively smoothly. It was able to make the decision proactively, too, making the decision to change a good distance before we were on top of the slow moving car. Oh, and of course, because this is Super Cruise, it all happened without us having to touch the wheel. Our automatic lane change test was followed by trying Super Cruise with a trailer. Now, it's important to note that the automatic lane-changing functionality won't work with a trailer. This is because that function depends on a set of radar systems at the back of the truck that are blocked by a trailer. Apart from that, the rest of Super Cruise's functions still work just fine. To make this possible (and safe), the system is able to estimate the weight of the trailer and adjust following distance accordingly, allowing it to safely slow down as needed.

New recall issued in 2019 Chevy Silverado and GMC Sierra brake software saga

General Motors (GM) has issued a new recall for select 2019 Chevy Silverado 1500 and GMC Sierra 1500 pickup trucks that aims to resolve a faulty fix for a previous recall. According to National Highway Traffic Safety Administration (NHTSA) campaign No. 20V055000, a software update for the Electronic Brake Control Module (EBCM) could cause the electronic brake assist to be disabled.  The NHTSA first launched a recall for 463,995 Silverados, Sierras, and Cadillac CT6es on December 12, 2019 due to a software issue in the electronic brake control module (EBCM) that could disable the electronic stability control (ESC) and anti-lock braking system (ABS). As a response and resolution to that recall, GM began to reprogram the software in affected vehicles. GM later learned that the fix was creating a different problem. The installed software had its own error that was disabling the electronic brake assist. If customers see “Service Brake Assist” or “Service ECS" diagnostic warnings, they should park the vehicle and have it towed to a dealership, GM warns. While GM was going through the process of testing, pinpointing the issue, determining action and working with the NHTSA, safety experts have criticized Chevrolet and GMC for not reacting promptly and appropriately.  According to the recall, 148,055 are now affected, all of which do not meet the standards of Federal Motor Vehicle Safety Standard (FMVSS) number 126, "Electronic Stability Control" and 135, "Light Vehicle Brake Systems." To fix the braking issue, GM will once again reprogram the software. GM began notifying owners of the recall on February 10, 2020. Related Video: