2013 Gmc Acadia Slt1 on 2040-cars

Auto blog

2015 Chevy Silverado, GMC Sierra can tow up to 12,000 pounds

Think back to the launch of the 2014 Chevrolet Silverado. At the time, General Motors happily trumpeted that its fullsize pickup could tow up to 11,500 pounds when properly equipped - impressive stuff, no doubt. But now, revised tow rating practices have been put into place, called SAE J2807. And with these new methods of testing, GM can now officially rate both the Silverado and its GMC Sierra twin as being able to tow up to 12,000 pounds.
Of course, not all Silverado and Sierra models are capable of this feat. In fact, because of SAE J2807, most of the truck models have actually had decreases in tow ratings from the 2014 to 2015 model year. For example, a 2014 Silverado Crew Cab with the 5.3-liter V8, 5.7-foot box and 3.73 rear axle was rated at 11,200 pounds in 2014, but has since been reduced to 10,800 in 2015. Same goes for the Sierra.
But for 2015, both the Silverado and Sierra can be had with a more powerful 6.2-liter V8, as well as a Max Trailering Package that includes a 9.76-inch rear axle, heavy-duty rear springs, revised shock tuning, improved cooling and a new trailer brake controller. There are also four- and seven-pin, bumper-mounted connectors, a trailer hitch (duh), and a G80 locking rear differential. This configuration, with either model, is the only way you can actually tow 12,000 pounds.

GM may have teased a whole group of electric vehicles

During GM's big CES press conference, the automaker highlighted a number of its upcoming electric car-related projects from delivery vans to the upcoming flagship Cadillac Celestiq. In the middle of it all, a collection of mystery cars sat in the background behind speakers. They were in the dark, lit only with their running lights, and while it's possible they're just generic filler cars or concepts, we think they could be future products. Our best shot of the cars together is shown above, and we can pretty easily identify three of the vehicles. In the center is obviously the GMC Hummer EV. On either side of it are Cadillacs. To the left seems to be the Lyriq crossover, and to the right is the Celestiq sedan. Two of these cars have production dates, and the third has been confirmed for eventual production, just without timing. This is why we think the rest of the cars are upcoming models. The next most easily identified car is on the near right behind the Cadillac Celestiq. It very clearly has a Chevy bowtie illuminated in the running lights. And looking closely, it appears to be a pickup truck. It's difficult to make out anything more than that. The nose does look a bit more rounded and swept back than the brick-like designs of the Silverado truck line. That also squares with what seemed to be the upcoming truck that appeared in the background of yet another GM presentation. GM previously said this electric Chevy truck will be a full-size model with up to 400 miles of range. That leaves us with three more mysterious models. Over to the left behind the Cadillac Lyriq are what appear to be a pair of crossovers. The one on the far left looks low, curvy, and possibly with a fastback roof. The one on the right is taller, boxier, and probably more of a full-size people hauler. It's hard to say much more beyond that. They could be new electric Buicks, which would fit in nicely with that brand's crossover portfolio, and would likely be highly successful in China, where Buicks, crossovers and electric cars are all rather hot commodities. As for the mystery car on the far right, it's quite a puzzle. We can at least rule out Buick and Cadillac, and GMC since it's definitely a car, and a rather small one compared with the other cars on display. That leaves Chevy, and possibly the autonomous division Cruise. We're leaning toward it being a Chevy, since the first Cruise vehicle is going to be a boxy pod of sorts.

Overland Expo's GMC Sierra AT4X is an Aussie-style ultimate overlander

Overland Expo is a caravan of companies producing everything one could need or want for overlanding. So what better what to showcase the kind of hardcore overlander possible by dipping into that parts caravan than to build just such an overlander? That's what the Expo did in creating its second Ultimate Build, based on a 2022 GMC Sierra AT4X. Overland Expo said it chose the Sierra for the 6.2-liter V8 with 420 horsepower and 460 pound-feet of torque because it wanted to "go bigger and more extreme" than its first build last year, which was based on a Toyota 4Runner TRD Off-Road. This Sierra trim was chosen over its AT4 sibling due to the extra dose of rugged, like the Multimatic spool dampers that provide about an inch more suspension travel front and rear, and the front and rear locking differentials. The Denali-like luxury isn't a bad thing to have, either. The only performance mods are a MagnaFlow cat-back exhaust, Firestone Ride-Rite air springs at the bag and 17-inch Icon Dynamics wheels on 33-inch 33 Firestone Destination Mud Terrains replacing the stock 18-inchers on Goodyear Wranglers.   Rig builder Mule Expedition Outfitters tapped more than 21 exhibitors for components, and spent "hundreds of hours" putting them all together seamlessly. The most eye-catching swap comes from the MITS Alloy three-foot canopy and tray that replaces the pickup bed. MITS is an Australian company, hailing from the land that also gives us overlanding powerhouses like ARB and Old Man Emu, and this is a popular outback-style rig. In addition to the storage areas on the sides and underneath, the canopy holds a Dometic refrigerator, Green Goat Outdoors camp kitchen and an eight-gallon water can that feeds a Geyser Systems shower. A solar panel on the roof routes power to a pair of lithium-ion batteries in the canopy as well, their output controlled by a Redarc RedVision Manager30.  There are plenty of Rigid lights for avoiding trouble, and a Forrest Tool Max Tool Kit plus GoTreads for when trouble inevitably appears anyway. The crew cab should hold plenty of gear, but anything else that needs to be stored outside will go in a set of 3D dry bags.