2012 Sle, Only 18.8k M, Chrome Grille, Running Bd, Roof Rack. Sharp Looking on 2040-cars

Auto blog

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.

Hummer teases crab mode, reveal set for Oct. 20

DETROIT — GMC confirmed it will reveal the Hummer electric off-roader Oct. 20 and released a video teasing the vehicleÂ’s so-called crab mode. Crab mode allows the Hummer to move diagonally and is enabled by the vehicleÂ’s four-wheel steering. The video shows tires, and well, a crab. “When you're in the really difficult terrain, this just gives you unparalleled maneuverability,” said Duncan Aldred, global vice president of Buick GMC. The Hummer will be offered as truck and SUV models, and customers will be able to make reservations beginning on the reveal date. Deliveries are expected to begin in fall 2021. The Hummer was supposed to be revealed May 20, but was delayed due to the Covid-19 pandemic. The Hummer was teased in a Super Bowl ad this year with NBA superstar LeBron James, who is the vehicle's frontman. It will have several EV powertrains which General Motors calls Ultium, and the most capable variant will have an estimated 1,000 hp and hit 60 mph in three seconds. The Hummer will also offer removable roof panels. “This is very much going to be a luxury vehicle which competes against a broad spectrum,” Aldred said Monday on a conference call with reporters. The Hummer will take aim against a variety of vehicles, including the four-door Bronco, RivianÂ’s truck and SUV and the Jeep Wrangler 4xe. Aldred is optimistic the return of the Hummer name will help GMC carve its niche in this growing segment of trucks and SUVs with varying degrees of electric propulsion and off-road capability. GM sold vehicles under the Hummer brand from 1992-2010, before scrapping it in the wake of GMÂ’s historic 2009 bankruptcy and restructuring. Hummer is relaunching under the GMC umbrella. “ItÂ’s real desirability, itÂ’s almost cult-like status,” Aldred said. “I think a huge amount of people are going to have interest in this.” GM, which is re-emphasizing its defense division, could also repurpose the Hummer for military use, perhaps as transport vehicles. Hummers are descended from the Humvee, which is still used by U.S. forces.

Junkyard Gem: 1973 GMC Sierra Grande Camper Special

Starting in the 1973 model year, General Motors introduced the "Rounded Line" family of C/K-series Chevrolet and GMC trucks, and sales of the pickup versions continued all the way through 1987. Nice examples of these trucks can sell for large money, but the junkyard teaches us that not all collectible vehicles are worth rescuing and fixing up. Here's a reinforcement of that lesson, courtesy of a first-year GMC C2500 Camper Special with the high-zoot Sierra Grande trim level, found in a self-service yard just outside of Denver, Colorado. I'm no GM truck expert, but I know enough to stay clear of the battles over what to call this pickup. Let's just say it's a three-quarter-ton, rear-wheel-drive third-gen C-Series with really cool badges. Yes, I bought this badge for my garage wall, and it was totally worth the $4.23. GM came up with the Camper Special package during the late 1960s, when removable pickup campers became popular, and for 1973 it included heavy-duty springs and a wiring harness made to plug into the connectors on slide-in truck campers. It also included woodsy-looking badges, but someone pried the ones off this truck before I could buy them. This may well have been a one-owner truck, because it still had original warranty paperwork inside. Here we see that it was purchased new on August 2, 1973 (which happens to be the day that George Brett got his very first hit in the big leagues) by a resident of Compton, California. Yes, that Compton. The build tag tells us that this Camper Special was born at the Fremont Assembly plant in California, which became the GM-Toyota NUMMI venture in 1984 and is now the Tesla Factory. I think most 1973 C/K pickups sold new in Colorado would have come from Pontiac Assembly in Michigan. There was a time, not many years ago, when a genuine 454-cubic-inch (that's 7.4 liters to those of you sweating under the oppressive weight of the French Empire's Measurement System) big-block Chevrolet engine would have been yanked out and purchased within hours of hitting the rows of a yard like this. These days, engine-swappers can get more power with less weight from any number of donor vehicles. If this engine is the original 454, it was rated at 240 horsepower and 355 pound-feet (down from 270 hp in 1972 due to emissions-related changes). This truck had a three-speed automatic transmission, like most optioned-up Detroit pickups of its era.