2012 Gmc Acadia Sle on 2040-cars

Auto blog

2023 GMC Canyon revealed with new ZR2-based AT4X trim

Following up on the reveal of its twin, the Chevy Colorado, the 2023 GMC Canyon has made its appearance. Naturally, it shares much with the Chevy pickup, but GMC has gone to greater lengths to differentiate the truck. It comes standard with the high-output engine, all versions feature the wide-track suspension setup, and in addition to the now more luxurious Denali, there's a ZR2-based AT4X trim. As with the new Colorado, the Canyon gets an overhaul of the design. It's down to one bed and cab configuration (short-bed, crew cab), and it features a longer wheelbase with the front axle pushed forward. The Canyon does get a variety of unique design features, though. It has its own front fascia with a tall, rectangular grille. LED lighting is standard on all Canyon models all the way around. That includes the unique fender lights like those found on the Sierra HD. All Canyons also feature the wide-track off-road suspension like the Colorado Z71 and Trail Boss. There are no narrow-track, narrow-body versions, even on the base two-wheel-drive Elevation. That suspension also means all Canyons have a roughly two-inch lift over base Chevy Colorados. The GMCs also get standard 32-inch tires, and they don't feature a front air dam in order to provide better approach angles. The bed, while only available in one trim, is available with a unique storage bin in the tailgate. On the topic of suspension specs, the Elevation and AT4 trim levels have 9.6 inches of ground clearance. The Denali increases that to 10.5 inches, and the AT4X features 10.6 inches. It also picks up the Multimatic spool-valve shocks from the ZR2. But we'll talk more about what comes on the AT4X in a bit. Under the hood of the Canyon is just one engine. It gets the highest-output version of the 2.7-liter turbocharged four-cylinder. The engine makes 310 horsepower and 430 pound-feet of torque. The only transmission is an eight-speed automatic. Two-wheel drive comes standard on Elevation, and other trims come standard with four-wheel drive. The inside of the Canyon is very similar to the Colorado, but it has some unique cues. It has air vents that are more integrated into the squared-off dashboard design, rather than the Chevy's round vents. It has a differently shaped dash pad and trim surrounds, too. The really big differences come on the Denali and AT4X trims, though. The Denali features real wood trim with laser etchings. It also gets lots of real leather and fancy stitching.

GMC Canyon AT4 OVRLANDX concept previews potential Bison-like model

GMC is signaling a move into serious off-road territory with this Canyon AT4 OVRLANDX concept. As its name suggest, this one-off was put together as a demonstration of what an overland-style GMC midsizer could potentially look like, but a glance beneath the surface reveals the bones of what we expect to be the forthcoming Canyon AT4X.  While "AT4" has been trickling down through the GMC lineup for the past few model years, AT4X kicks the basic off-road formula up a notch, a la Chevrolet's Colorado ZR2, which gains extra underbody protection, locking front and rear differentials and Multimatic's phenomenal DSSV dampers.  GMC Canyon AT4 OVRLANDX Off-Road Concept View 23 Photos OVRLANDX takes that to the next level, borrowing (and building upon) cues from the even-more-rugged ZR2 Bison, including rocker panel guards, cast-iron control arms, a custom front bumper with an integrated winch, built-in front recovery points, wheel arch trim with integrated LED task lighting, and guy lines for protecting the windshield from low-hanging branches. The custom rear bumper is even from American Expedition Vehicles (AEV), with whom Chevy partnered to produce the Bison's unique exterior bits. Does that seem like a wink and nod to you? “We wanted to showcase GMC Canyon with this concept and punctuate GMCÂ’s commitment to premium, off-road capable vehicles,” said Buick & GMC Global Vice President Duncan Aldred. "Consumer reaction to this conceptÂ’s design will help us further serve the growing market of buyers leading authentic outdoor lifestyles." This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. To that end, they threw a few more goodies at the concept. In a way, the roof-mounted tent, awning, cooler and kitchenette are just there to disguise the fact that GMC will likely build a production pickup with much these same specs when the new model debuts for the 2023 or 2024 model year – or perhaps even sooner. While this concept is built around GM's existing 3.6-liter V6 powertrain, the redesigned Canyon is expected to be offered with just one engine: a 2.7-liter turbocharged four-cylinder lifted from the Silverado and Sierra pickups.  Rumors have pointed to a GMC variant of the Colorado ZR2 since the midsize pickup adopted the AT4 branding for its off-road variant.

Leaked GM document shows GMC Sierra I6 diesel is more powerful than F-150's

GM told us earlier this year that the 2019 GMC Sierra would be getting a 3.0-liter I6 diesel option, but it never mentioned power or fuel economy figures. Hold the phone though, because a leaked GM Canada document just showed up online that lists out the details we've been waiting for. Originally published by TFL Truck, the 3.0-liter oil-burner supposedly makes 282 horsepower and 450 pound-feet of torque. For those who are counting, that's more than the Ford F-150's 250 horsepower and 440 pound-feet from its 3.0-liter diesel. It soundly bests the 240 horsepower and 420 pound-feet of torque from Ram's 3.0-liter diesel as well. Fuel economy is another story, though. The promotional material states that it will get 28 mpg on the highway, which is 2 mpg short of the F-150's 30 mpg — mind you, it's only capable of that magical 30 mpg figure in rear-wheel drive form. There's another caveat here, too; these are numbers for Canada, so they're not exactly finalized EPA figures. However, we wouldn't expect drastic differences between the two when the American numbers come out. The leaked documents also state the diesel Sierra will be capable of towing 7,800 pounds. That number seems remarkably low when compared to the F-150, which can tow up to 11,400 pounds with its diesel. Extra power and torque would have us assume that GM could get even better numbers than Ford, so we're going to hold our final judgment for official word. A 10-speed automatic will do the shifting on the diesel, just like on the 6.2-liter V8. Since the Chevy Silverado is also expected to get this engine, we can assume the figures would be almost, if not identical, to those we see here. We recently drove the 2019 Sierra and Silverado without the diesel engines, so go check those reviews out if you'd like to know more of our thoughts on the redesigned GM trucks. Related video: