2011 Gmc Acadia Denali Suv 3.6l Low Miles Awd Navigation Camera on 2040-cars

Auto blog

2021 Chevy Colorado and GMC Canyon facelift spied

The Chevy Colorado and its GMC Canyon twin have been on sale for a good long time now, and while things move a little more slowly on the truck side when it comes to facelifts and model changeovers, it seems like it’s about time. So itÂ’s no surprise to see some lightly camouflaged trucks running around ahead of what appears to be a minor refresh for the 2021 model year. Starting with the Colorado, it appears to have a bowtie hiding behind some camo in the center of the grille, which otherwise looks like the no-bowtie option you can get on 2019-and-up trucks. It could be that Chevy is keeping the no-bowtie grille design but allowing a bowtie to grace it, or it could be misdirection. Either way, the grille pattern adds a bit of flair to the otherwise staid front end design. There also appears to be a bit more shape to the lower air inlet, with echoes of some of the lower fascias of its bigger Silverado stablemate. The Canyon, on the other hand, shows more extensive front-end changes. At first glance, it looks to emulate some variants of the GMC Sierra, which would make sense given those modelsÂ’ changes for the 2020 model year. In particular, this Canyon has hints of Sierra HD, being more square and monolithic than the regular Sierra 1500s, although itÂ’s a little hard to tell with the camo covering the edges of the grille. It could certainly also adopt more rounded corners like the 1500s. Either way, itÂ’s more vertical and thereÂ’s less differentiation between the upper grille and lower opening. ThereÂ’s nothing in the way of changes around the sides or back, and while there may be some minor changes inside, we arenÂ’t expecting any. The word around town is that this isnÂ’t a full facelift, but rather a minor front end tweak thatÂ’ll just be a regular part of the model-year changeover. 

Chevy Colorado, GMC Canyon midsize pickup trucks to get diesel engines

The market for midsize pickup trucks has all but been abandoned in the US, but General Motors is about to shake the market up with the all-new (to the US) Chevrolet Colorado and GMC Canyon. Launching next year, GM already told us that its new trucks would be a "fuel-efficient alternative" to fullsize trucks, and aside from the smaller size, Automotive News says that these trucks will accomplish this with a diesel engine.
According to the AN report, the next-gen Colorado and Canyon will offer a small, four-cylinder Duramax turbo diesel with a displacement of either 2.5 or 2.8 liters - both engines are currently used in this truck for other markets. This would allow GM to join the Cummins-powered Nissan Titan and Ram 1500 EcoDiesel as the only non-HD trucks in the US to offer diesel. The article goes on to say that the diesel versions of the Colorado and Canyon would launch about a year after the trucks go into production in fall of 2014.

Torque time | 2017 GMC Sierra HD First Drive

It's not the truck that counts, it's how you use it. It's the heavy stuff you fit in its bed or the extremely heavy stuff that gets hooked up to the tow hitch. The ATV, the Jet Skis, the trailer with more square footage than a Greenwich Village apartment. Perhaps you need to get Seabiscuit or, uh, Mr. Ed to wherever they need to gallop next. In our case, there's a pair of very serious-looking snowmobiles perched atop the bed of a GMC Sierra. They spread out as wide as the extended tow mirrors, and their back halves are dangling precariously beyond the truck. Sterling Archer would be giddy; I'm a little nervous. But only because canyon roads and wide vehicles with a high center of gravity go together like peas and custard. The added weight is no sweat at all. That's because this is the 2017 GMC Sierra HD Denali, a truck with the sort of enhanced power, torque, suspension, and stopping capability expected of a heavy-duty pickup. And for this year, the power and torque get a serious bump courtesy of a new 6.6-liter Duramax turbodiesel engine reengineered from almost the ground up with 90 percent new parts. It's quieter and more efficient and it emits less, while most importantly producing 445 horsepower and 910 pound-feet of torque. That's up from 397 and 765, respectively. Chevy fans will note that the same engine is also available in the updated 2017 Silverado HD. Now, for those keeping score at home, that horsepower is best-in-class but the torque number still falls short of the new Ford Super Duty and its Power Stroke diesel V8's 925 lb-ft. Aw shucks. For the record, GM's engineers didn't seem too concerned that they weren't able to eke out an extra 16 torques just to say they're No. 1. "We wanted to first meet emissions and then deliver the maximum horsepower and torque we could, and deliver it over the widest usability range possible," said chief engineer Eric Stanczak. And let's be honest here, 910 pound-feet is herculean, and once again, a jump of 145 lb-ft. Or one Subaru Impreza's worth. Or 110 more than the best Ram can do on a 2500, and its Cummins turbodiesel's 800 pound-feet was eye-popping not too long ago. (The Ram 3500 maxes out at 900 lb-ft with the right transmission.) Ah, but here's the rub. That Cummins-equipped Ram 2500 can still tow more weight according to SAE-compliant measurements – 17,510 pounds for a Ram crew cab with a short bed versus 13,000 in the similar Sierra 2500. The Ford F-250 can manage 15,000.