2011 Acadia Slt-2 Awd,sunroof,hud,nav,rear Dvd,htd/cool Lth,quads,35k,we Finance on 2040-cars

Auto blog

2017 GMC Acadia loses 700 pounds, gains everywhere else

Ladies and gentlemen, welcome to Acadia. The 2017 version of the three-row GMC crossover has all kinds of newness. The 2017 Acadia has lost 700 pounds compared to its predecessor thanks to high-strength steels allowing redesigned parts, and the fact that it overall, the vehicle is actually smaller. Length is reduced by 7.2 inches on a wheelbase diminished by 6.4 inches, it is 3.5 inches narrower and sits 3.9 inches lower. The 2016 Acadia was 4,656 pounds, the 2017 is 3,956 pounds. GMC says it will still swallow people, but not as many: the eight-passenger option didn't make the transition, potential three-row trims permitting five-, six-, and seven-passenger configurations. While you lose space, you gain convenience with a split-folding second row featuring tilt-and-slide for both sections. The third-row seats fold flat into the cargo floor, and if the second row is folded as well, cargo capacity improves over the 2016 Acadia, 79 cubic feet compared to 70 cu-ft. A new 2.5-liter four-cylinder brings a second engine option to the spec sheet, returning an estimated 22 city miles per gallon and 28 highway mpg with the help of stop/start tech on front-wheel-drive trims. The new 3.6-liter V6 gets around 310 horsepower, a power bump of about 19 hp, and an estimated 25 highway mpg in front-wheel-drive guise. Towing capacity for that V6 goes down, though, from 5,200 on the current Acadia to an estimated 4,000 pounds. The optional Tow Vision Trailering system will make that pulling easier. Both engines are hooked to a six-speed automatic. Now we can get to its looks. Trademarks like the square, flared wheel arches, dark D-pillars, and wraparound rear side windows made the transition, everything else is new. While weight has gone down, safety's gone way up with internal changes like the splayed chassis members to confront the small-offset test. New active safety upgrades run from from three kinds of automatic braking systems to surround vision cameras, automatic high beam control, a safety alert seat, and a following distance indicator. Buyers can choose from a front-wheel drive, all-wheel drive, or All Terrain model, each with its own electronic drive selector modes. The Normal, Sport, and Trailer/Tow modes are common to the trio. The FWD gets a Snow mode, the AWD adds adaptive 4x4 and Off Road modes; on the AWD, the 2x4 mode disconnects the rear axle from the drivetrain.

Will GMC enter the subcompact crossover segment after all?

GMC last year categorically ruled out launching a subcompact crossover positioned below the Terrain, but the decade-old rumor refuses to die. The on-again, off-again model is back on track for production, according to a recent report. Citing anonymous sources, enthusiast website GM Authority claims the soft-roader is closer than ever to receiving the proverbial green light for production. It hasn't been approved yet, so development work hasn't started. What it will look like if it receives a thumbs-up from executives is up in the air, but GMC can take several paths into this lucrative (and increasingly popular) segment of America's new-car market. Chevrolet has two fighters in the ring: the Trailblazer and the Trax. GMC could feasibly choose one, put it in a brand-specific wrapper, and call it a day. It could also design its entry from scratch, though this option would take longer and cost significantly more. Either way, the model will allegedly be called Granite or Graphyte, and it will be positioned below the Terrain in terms of size and price, meaning it would likely start above $20,000. In 2019, GMC explained it ruled out expanding its range towards the bottom to position itself as a premium brand. It wanted to focus on high-profit models, like the Sierra and the Canyon, but the crossover's ever-increasing popularity may have proven too alluring to resist. Besides, small and premium aren't mutually exclusive, and downsizing would help the brand increase its annual sales. If you're experiencing deja vu, it's likely because we've heard murmurs about a city-friendly GMC since the Granite concept (pictured) made its debut during the 2010 edition of the Detroit Auto Show. It was approved for production that year, approved again in 2011 (tentatively on a Cruze platform), and abruptly canceled in 2012. GMC hasn't commented on the report, so we'll need to be patient to find out if it's accurate — and how it would differentiate its entry-level crossover from Buick's. In the meantime, the company is putting the final touches on the electric Hummer, which will be offered as a pickup and as an SUV, and it's about to unveil the 2022 Sierra. Featured Gallery GMC Granite Concept Rumormill GMC Crossover

Even if GM does close all 5 of those plants, it'll still have too many

DETROIT — General Motors' monumental announcement on Monday that it will close three car assembly plants and two powertrain plants in North America and slash its workforce will only partially close the gap between capacity and demand for the automaker's sedans, according to a Reuters analysis of industry production and capacity data. Sales of traditional passenger cars in North America have been declining for the past six years and are still withering. After GM ends production next year at factories in Michigan, Ohio and Ontario, it will still have four U.S. passenger-car plants — all operating at less than 50 percent of rated capacity, according to figures supplied by LMC Automotive. In comparison, Detroit-based rivals Ford and Fiat Chrysler Automobiles will have one car plant each in North America after 2019. The Detroit Three are facing rapidly dwindling demand for traditional passenger cars from U.S. consumers, many of whom have shifted to crossovers and trucks. Passenger cars accounted for 48 percent of retail light-vehicle sales in the United States in 2014, according to market researchers at J.D. Power and Associates. This year, sedans will account for less than a third of light vehicle sales. That shift in turn has left most North American car plants operating far below their rated capacities, while many SUV and truck plants are running on overtime. The collapse in passenger-car demand is a challenge for nearly all automakers in the United States, including Japan's Toyota and Honda, which have the top-selling models in the compact and midsize car segments. Toyota executives said last month they are evaluating the company's U.S. model lineup. But Toyota also plans to build compact Corolla sedans at a new $1.6 billion factory it is building in Alabama with partner Mazda. The obstacles facing GM in its plans to close more auto factories became apparent on Tuesday as U.S. President Donald Trump threatened to block payment of government electric vehicle subsidies to GM. While it is not certain that Trump unilaterally has the power to do that, he made it clear he intends to use his office to pressure the company to keep open a small car plant in Ohio that GM says will stop building vehicles in March.