2010 Black Slt2! on 2040-cars

Auto blog

2023 GMC Canyon revealed with new ZR2-based AT4X trim

Following up on the reveal of its twin, the Chevy Colorado, the 2023 GMC Canyon has made its appearance. Naturally, it shares much with the Chevy pickup, but GMC has gone to greater lengths to differentiate the truck. It comes standard with the high-output engine, all versions feature the wide-track suspension setup, and in addition to the now more luxurious Denali, there's a ZR2-based AT4X trim. As with the new Colorado, the Canyon gets an overhaul of the design. It's down to one bed and cab configuration (short-bed, crew cab), and it features a longer wheelbase with the front axle pushed forward. The Canyon does get a variety of unique design features, though. It has its own front fascia with a tall, rectangular grille. LED lighting is standard on all Canyon models all the way around. That includes the unique fender lights like those found on the Sierra HD. All Canyons also feature the wide-track off-road suspension like the Colorado Z71 and Trail Boss. There are no narrow-track, narrow-body versions, even on the base two-wheel-drive Elevation. That suspension also means all Canyons have a roughly two-inch lift over base Chevy Colorados. The GMCs also get standard 32-inch tires, and they don't feature a front air dam in order to provide better approach angles. The bed, while only available in one trim, is available with a unique storage bin in the tailgate. On the topic of suspension specs, the Elevation and AT4 trim levels have 9.6 inches of ground clearance. The Denali increases that to 10.5 inches, and the AT4X features 10.6 inches. It also picks up the Multimatic spool-valve shocks from the ZR2. But we'll talk more about what comes on the AT4X in a bit. Under the hood of the Canyon is just one engine. It gets the highest-output version of the 2.7-liter turbocharged four-cylinder. The engine makes 310 horsepower and 430 pound-feet of torque. The only transmission is an eight-speed automatic. Two-wheel drive comes standard on Elevation, and other trims come standard with four-wheel drive. The inside of the Canyon is very similar to the Colorado, but it has some unique cues. It has air vents that are more integrated into the squared-off dashboard design, rather than the Chevy's round vents. It has a differently shaped dash pad and trim surrounds, too. The really big differences come on the Denali and AT4X trims, though. The Denali features real wood trim with laser etchings. It also gets lots of real leather and fancy stitching.

2019 GMC Sierra carbon fiber bed: How it's made

FORT WAYNE, Ind. — The redesigned 2019 GMC Sierra has some pretty nifty features, and the one that has had the most attention is the MultiPro flipping and folding tailgate. But the Sierra also features the first-of-its-kind carbon fiber truck bed. It's interesting, of course, for its capabilities, such as being 62 pounds lighter than the all-steel box. It even adds more cargo volume since the material can be assembled and shaped differently from steel. As it turns out, the assembly process is cool, too, which we learned when GMC invited us to see the beds being made. Every GMC carbon fiber bed starts out as perfectly flat sheets of thermoplastic carbon fiber. The sheets consist of a mix of fibers and resins, a bit like the molded carbon fiber parts Lamborghini uses. The sheets are manufactured by Japanese company Teijin, which collaborated with GMC to develop the bed. They're all delivered to Continental Structural Plastics (CSP) in Fort Wayne, Ind., for construction into the actual bed. The company, a subsidiary of Teijin, makes a wide variety of composite and plastic parts for the car industry, including body panels for the C7 Chevy Corvette. The rectangular sheets are cut to shape and stacked up at a giant stamping press. Robots pick up sheets and slide them onto a conveyor that goes into a large oven. The heat softens the parts so they can be stamped. The large primary bed parts such as the base are stamped by CSP's enormous 3,600-ton press, and the smaller ones go through a 1,000-ton press. Each press can do different parts using different stamping dies, and CSP switches between dies to produce different batches of parts. After stamping, the parts roll out mostly ready for assembly, but there are rough edges that are trimmed off by water-jet cutters. These cutting machines also create holes for fasteners and for parts such as tie-down hooks and lights. The stamping process also provides the carbon fiber bed with a unique Easter egg. On the bottom of the base of the bed, there are two words: "Connors Way." This is a tribute to Tim Connors, who was the chief engineer of manufacturing at GM and a strong proponent of the carbon fiber bed. He was tragically killed in a motorcycle crash a few years ago. The words were added to honor him, and they were fortunately approved for production. There are some components to the bed that aren't stamped from the flat sheets of material.

2015 GMC Yukon Denali

Automotive enthusiasts often wonder aloud - ourselves included - why General Motors would choose to keep GMC while sending Pontiac (and Saturn, and even Oldsmobile before it) into the great automotive graveyard in the sky. The answer, as is so often the case, is profit. It's much easier for GM to rake in money hand over fist by rejiggering the trucks, crossovers and SUVs that it would already be developing for Chevrolet and making them a bit more luxurious and *ahem* "Professional Grade" with new grilles, badges and unique packaging for GMC.
While it may sound like we're being cynical, we totally approve of GM's fullsize SUV strategy. The least-expensive way to get into the fold is with the Chevrolet Tahoe, which starts at $45,595 with a 5.3-liter V8 engine and a cloth interior. Bumping that same Chevy to LTZ trim and its $59,995 sticker price lands a much nicer leather-clad interior and more techno-bells and whistles than you can shake a stick at. But it still looks like a Tahoe, and it still comes with the smaller 5.3-liter engine. Or, you could do what we'd do: Walk into your GMC dealer and take a look at the Yukon Denali. Here's why.
Driving Notes