2002 Ford Windstar Sel,7 Pass,leather,cd,dvd,all Option, No Reserve!!!! on 2040-cars

Auto blog

Ford E-Series chassis cabs and cutaways to survive mass Transit onslaught

In March 2013, Ford announced we'd be getting chassis cab and cutaway versions of the Transit. Since incoming Transit vans will soon be rolling over the grave of the E-Series van, it was assumed that all E-Series models would go six feet under as well. According to a report from PickupTrucks.com, however, that's not the case, the report claiming that the highly modifiable E-350 and E-450 chassis cab and cutaway versions will continue being produced in Avon Lake, Ohio "at least until 2020."
Being decades old, the be-cabbed E-Series platform has found its way under an army of heavy-duty shuttle buses, work truck and ambulances. Ford spokeswoman Jessica Enoch verified the production horizon, telling Autoblog that the particular E-Series configuration "are a higher GVWR than the Transit chassis cab and cutaway (available this summer), which is more Class 2 and a new segment for us." So there you have it.

Ford readying dozen+ Mustang models for SEMA

Ford is unsurprisingly bringing a herd of its new 2015 Mustang models to next month's SEMA show in Las Vegas. Over a dozen of them are arriving from top aftermarket outfits like Galpin Auto Sports, Steeda, Roush and others. The Blue Oval isn't just shining a spotlight on the V8 model, though. The new EcoBoost 2.3-liter version with 310 horsepower and 320 pound-feet of torque is also getting its time in the sun.
Among the shined-up ponies will be a showcar helping Galpin celebrate the Mustang's golden anniversary, with the car is covered in the precious metal. The black paint over the body has gold flecks in it, and the wheels, side sills, brake calipers and badges all match, as well. However, it takes more than something shiny to truly impress at SEMA, and Galpin's Mustang also packs a Whipple supercharger for the 5.0-liter V8, boosting the bottom line to 725 horsepower. Take that, Hellcat. There's even a window in the hood to look through, not unlike a Chevrolet Corvette ZR1. The coupe also wears new headlights with LED turn signals that activate in sequence, just like the taillights, and the interior features black-and-gold Recaro seats.
Also set for its SEMA debut is an MRT showcar that takes the EcoBoost Mustang for a gallop with its TKO treatment. The black and orange two-tone car has been designed to incorporate select road racing elements. Mechanical upgrades include 14-inch brake rotors with new ducts, a Vortech air-to-air intercooler and an Air Lift suspension. The Mustang also shows off the company's products for added style and performance including a hood with integrated heat extractors and a unique front splitter.

A cool boost to turbocharger performance

Since the advent of the forced-induction engine, we have been looking for ways to get every drop of performance we can. There are many approaches to getting additional power using better intercooling, water injection, or even adding nitrous oxide. One take on a short instant burst of power is being researched by Mahle and involves providing supercooled air to an engine, which allows it to burn a leaner fuel mixture and produce more power. The supercooling idea is not new and was examined by Ford in 1993 on the Mustang Mach III concept car, then brought up again in 2003 with the SVT F-150 Lightning concept. Ford called its system the SuperCooler; it was designed to work with any turbocharged or supercharged engine equipped with a water-to-air intercooler. The system on the Lightning concept used a small tank of antifreeze that was hooked up to the truck air conditioning compressor. The air conditioning compressor cooled the antifreeze down to about 30 degrees. The other side of the tank was hooked up to the air-to-water intercooler, which usually had a temperature over 100 degrees. Once the antifreeze was circulated from the tank into the intercooler, it would lower the intercooler temperature and provide for a cooler, denser air charge into the engine; the result was around 50 extra horsepower for a burst of about 30 seconds to a minute, depending on the size of the tank. The system for the Lightning was to be offered as a $750 option and would have been targeted towards drag racers and the like, as it could be used for a run down the drag strip and then re-cooled by the time the truck was back in line. The system was fairly non-intrusive – it only weighed about 25 pounds and did not require a new compressor or intercooler. But as with many concepts, it was ultimately scrapped. The technology was always stuck in the back of my mind, but with larger and more powerful engines being produced it could not find its place. With the advent of new fuel economy standards, we have seen small-displacement turbocharged engines pop up and they seem like the perfect candidate for this type of technology. Ford's EcoBoost 1.0-liter three-cylinder turbocharged engine, as used in the Fiesta and Focus, is one such candidate for this technology. It would add a negligent amount of weight but could provide a boost of 10 to 20 horsepower when needed, like merging onto the highway or catching up to traffic.