65 Thunderbird With Thousands Recently Spent, A/c on 2040-cars

Auto blog

Ford recalling 126,000 Fusions and Milans over wheel separation concern

Ford has announced a recall of certain Ford Fusion and Mercury Milan vehicles after an investigation by the National Highway Traffic Safety Administration. A total of 128,616 2010 and 2011 models equipped with steel wheels may have been manufactured with wheel studs that could crack and split over time. If that happens, the vehicle may experience a wheel separation.
According to The Detroit News, the company is aware of a total of 30 wheel separation incidents, one of which occurred on the front of the vehicle. Even so, no injuries have been reported as a result of the defect.
The problem apparently stems from the fact that the mounting pads on the vehicles' steel wheels may have been faulty from the factory. In addition, the wheel mounting face on rear disc brakes may not have been installed properly. Ford will inspect the rear disc face and replace them as necessary. In addition, the company will replace all of the vehicle's wheel studs free of charge. Head to the NHTSA website for more information, and click past the jump to view the full recall notice.

Ford recalls 591,177 vehicles in four separate campaigns

Ford is issuing recalls for a total of 591,177 vehicles worldwide, in four separate campaigns. The announcement comes just days after the discovery of door-latch problems in 390,000 of the automaker's cars. The largest of these new recalls covers 518,313 examples of the Ford Fusion and Lincoln MKZ from the 2013-2015 model years, plus the 2015 Edge. Of these, 487,301 of are in the US and 31,012 are in Canada. For vehicles in cold-weather areas, the bolts that hold the steering gear motor can corrode and fracture. If this happens, it could cause the power steering to fail, but manual control would be retained. There are no reported accidents or injuries from this problem. To fix things, dealers will replace the bolts and seal them. The next campaign covers 50,157 examples of the 2014 Focus, Edge, Escape, and Transit Connect, plus the Fiesta from 2014 and 2015. Of these, 45,505 are in the US, 4,618 in Canada, and 34 in Mexico. All of them exhibit a problem with the fuel pump where the nickel plating can cause the part to seize and the engine to stall, if this occurs. (All of which sounds like recent problems with Nissan and BMW models.) According to Ford, there is one allegation of an accident from this problem. Dealers will replace the fuel delivery module to fix the problem. Ford is also recalling 22,616 units of the 2015 Lincoln MKZ because when the headlights are on, the parking lamps are brighter than they are allowed to be. The light could affect the vision of other drivers. This campaign includes 21,435 of them in the US, 1,066 in Canada and 115 in Mexico. There are no accidents or injuries from the issue, but Ford is updating the software to dim the lights on these sedans. Finally, Ford has a safety campaign for 91 examples of the 2015 F-150 because an underbody heat shield might not be properly installed or not present at all, which can be a fire risk. There are no reports of any actual accidents or fires, though. The affected pickups will have the parts replaced or added, as necessary after a dealer inspection. To see the specific build dates for the models affected by each of these campaigns, you can read about them in the press release below. Related Video: FORD ISSUES FOUR SAFETY RECALLS IN NORTH AMERICA Ford Motor Company is issuing four safety recalls in North America. One accident and no injuries are attributed to these conditions.

Help make Lego Icon Bronco a reality [UPDATE]

The Lego Ideas process is a pretty neat concept. The website allows anyone to propose a future kit, and if the project gathers 10,000 supporters within a certain amount of time, then the company investigates building it. The creator even gets a cut of the sales. We saw the operation at work last year with a very cool looking Corvette kit that hasn't hit the next stage quite yet. Now, another creator going by the username Legohero1966 has a fantastic looking replica of the Icon 4X4 Bronco hoping for support. The maker nails the boxy, brawny look of the Icon take on the classic Ford Bronco, and the Lego kit even gets the color pretty close. The miniature SUV also features a visible suspension, a removable top and, according to the description, a reel for the winch is hidden in the bumper. Underneath the body, this model even does a pretty good job of replicating the powertrain. As is expected by these kits, the hood, doors and hatch all open; on this one the spare tire carrier even moves out of the way, too. As of this writing, the Icon Bronco kit only has a little over 400 supporters, and that's a long way from the goal. If you like what you see, give the proposal a closer look on Lego Ideas. UPDATE: The original creator of the Icon Bronco kit, Paul Kim, has advised Autoblog that this Lego Ideas proposal was created without his consent, and he has reported the problem there. You can view more pictures of the Bronco and more of Kim's work, here. Featured Gallery Lego Icon 4X4 Bronco Proposal Design/Style Toys/Games Ford SUV Off-Road Vehicles Performance Classics Lego Ford Bronco icon icon 4x4 icon bronco lego ideas