1956 Ford T-bird, 312 V8,power Steering,brakes And Windows,two Tops, Low Reserve on 2040-cars

Auto blog

This 2,000-hp Mustang is in serious need of wheelie bars

The Ford Mustang on the right is drag racing with the standard technique. The Mustang on the left, driven by David Measell, is using a new "rear bumper only" technique that evidently surprised everyone at the South Georgia Motorsports Park strip - including Measell.
Measell said his outfit just bought the car the week before the event, noting that it has more than 2,000 horsepower. Speaking of his "flying" run, Measell said, "We turned it up to dip on down," by which he meant they turned up the power in order to get his time down. Turns out all that power and all that traction sent the nose straight up into the air almost as soon as the race began.
He told an interviewer afterward that this was his first race in a "regular car" since he normally drives a pro-mod. "I like my wheelie bars," he concluded. You can see how he got there in the video below.

How the 2015 Ford Mustang will save your knees

The 2015 Mustang is one of the most hotly anticipated vehicles of the moment, and Ford continues to leak out interesting little details about its newest pony car. The latest info doesn't have anything to do with its quarter-mile time or handling, but if any of that goes drastically wrong, the innovative new glovebox-mounted airbag may prevent passengers from knee injuries.
All variants of the 2015 Mustang get the active knee airbag as standard, and it's the first vehicle in Ford's lineup to receive the system. The setup is actually quite simple and ingenious. The glovebox is made from a plastic outer panel that is attached to the inner door. Sandwiched between them is this new injection-molded plastic bladder that folds flat when in use. If the passenger-side airbag deploys, the system springs into action to act as a cushion for your knees. Compared to a traditional knee airbag that has to fully inflate, this arrangement is 65 percent lighter and can use a 75 percent smaller inflator. It's also basically invisible when you look at the glovebox door.
Ford spokesperson Ed Saenz declined to tell Autoblog whether the system will appear in other vehicles in the Blue Oval's lineup but said, "We're considering other applications." Provided it's effective, the approach seems too simple not to make its way to other products. Scroll down to watch a video showing how the glovebox-mounted knee airbag works.

2015 Ford F-150's aluminum body not expected to hurt resale value

A cloud of skepticism has hung over the 2015 Ford F-150 since even before it went on sale. The issue had nothing to do with the truck's capabilities but instead over reservations about the switch to aluminum body panels. The change helped shed about 700 pounds off the scales, but the lighter metal also came with the potential for higher repair costs. Edmunds even recently whacked its pickup with a hammer just to find out how much it would cost. However, this might not be a problem, because the latest calculations indicate resale value for the new F-150 is on the rise. The residual experts at ALG estimate that the 2015 F-150 is going to hold 58 percent of its value over the next three years, versus 52 percent for the 2014 model, according to Bloomberg. That figure also gives the Ford the highest forecasted resale value among American fullsize pickups. The 2015 Toyota Tundra leads the segment by holding 63 percent. Meanwhile, the 2015 Chevrolet Silverado and GMC Sierra both come in with 51 percent, and the Ram 1500 holds 46 percent. Finally, the 2015 Nissan Titan comes in at 42 percent. The researchers believe that the improvement in fuel economy for the 2015 F-150 at up to 26 miles per gallon highway offsets higher body repair costs. "We are giving credit for the aluminum construction in the fuel efficiency we're seeing," Eric Lyman, ALG vice president of industry insights, said to Bloomberg. "We are not putting in a negative adjustment for concerns around repair costs or durability associated with aluminum." Ford has long-been preparing for the switch to aluminum. The company purposefully designed the body sections to make repairs easier, and it also partially subsidized dealers' investments for new equipment to do the work. Related Video: