Sel 3.0l Leather Cd Front Wheel Drive Tires - Front All-season Aluminum Wheels on 2040-cars

Auto blog

2014 Ford Transit unveiled in Chassis Cab and Cutaway versions

As a leader in commercial vehicles here in the US, we knew Ford wouldn't take too long to show off the chassis cab and cutaway versions of its 2014 Ford Transit van. Set to go on sale this fall, Ford already revealed the full-body version of the Transit, and now it has pulled the cover off exposed-frame models just in time to to compete against the all-new Ram Promaster.
The term "chassis cab" refers to models with a fully enclosed cabin used for box vans or rental trucks, while cutaway models leave the cabin open behind the B-pillars for a pass-through on vehicles such as Class C motorhomes or ambulances. Both will offer three wheelbase options (138, 156 and 178 inches), the choice of single or dually rear axles, and plenty of upfitter-friendly touches including a pre-wired body harness and multiple body mount locations.
The new design will also help make upfitting a little easier since the fuel filler is now built into the cab (just behind the driver's door). Those integrated fuel filler necks will serve to feed either a 3.7-liter V6, a 3.5-liter EcoBoost V6, or a 3.2-liter Power Stroke diesel. Transit chassis cab and cutaways will wear varying Gross vehicle weight ratings from 9,000 pounds to 10,360 pounds depending on spec.

The 1965 Ford Mustang could have looked a lot different

The 1965 Ford Mustang is unquestionably an automotive design icon, and nearly every generation of Mustang has some connection to that original car. Because it's such a universally-known vehicle, we were amazed to see all the different designs that were being considered. Head of Ford's archives Ted Ryan recently shared photos of design proposals for the original Mustang on Twitter that he and Jamie Myler found, and we reached out to them to find out more. As Ryan initially noted, the photos were taken on August 19, 1962, and they are proposals for the Ford Mustang. Apparently Ford had committed to doing a Falcon-based youth-oriented car at this point, and it did have plans to launch the car in 1964 for the 1965 model year. But after having little success with early design proposals, the company asked all of its design studios — the Advanced Studio, Lincoln-Mercury Studio and Ford Studio — to submit proposals. With only about two years before the planned launch, Ford was understandably short on time, and it's believed that the studios only had a month to create and present these designs. Lincoln-Mercury design proposal View 8 Photos The majority of the designs, a total of five, came from the Advanced Studio, and part of this was because they already had a couple of concept designs in reserve it could present. Two other models representing three design possibilities came from Lincoln-Mercury, and just one model with two options came from Ford. The Advanced Studio proposals are shown in the gallery at the very top of this article, and the Lincoln-Mercury and Ford proposals are in the gallery directly above this paragraph. The Advanced Studio's most radical design is the one that was clearly related to the Mustang I concept that would be shown later that year with huge wraparound rear glass, turbine-inspired bumpers and enormous side scoops. The other proposals from the studio were more conservative, featuring simple lines, grilles reminiscent of the Falcon, and one even borrowing the jet-thruster-style taillights made famous on the Thunderbird. Lincoln-Mercury had some impressively bold designs, particularly its fastback that had buttresses to extend the shape all the way to the tail. This car had two different side trim possibilities. The other Lincoln-Mercury design was toned down a bit, but had two interesting possibilities for side detailing, as well as some crisp, low-profile tail fins.

New European charging network will offer speeds up to 350 kW

It's about to get easier to fast-charge your electric vehicle across Europe thanks to four major automakers working together in a new joint venture. BMW, Daimler (Mercedes-Benz), Ford, and the VW Group (Audi and Porsche) have all signed a Memorandum of Understanding to install about 400 DC fast charging sites in Europe. As you may know, there are different types of fast chargers, but the ones that this group is talking about installing will be able to charge an EV in much less time than other stations. That's because these chargers will offer power levels of "up to 350 kW." Compare that to what's generally considered the current gold standard, the Tesla Superchargers, which have rates of up to 145 kW and a statement not that long ago from a Ford exec that suggested that 150 kW chargers would be the new normal. Of course, the Tesla chargers use the company's proprietary connector and the new network the JV is setting up will use the CCS standard. The first new stations will go up in 2017 and those 400 sites are just the beginning. A joint statement by the JV says that EV drivers will "have access to thousands of high-powered charging points" by 2020 along highways and main roads. "The charging experience is expected to evolve to be as convenient as refueling at conventional gas stations," the companies said. While not every electric vehicle will be able to take advantage of the 350 kW charging rate, the companies involved would be silly to build the infrastructure without vehicles that can handle that kind of energy flow. The JV says it would welcome participation from other automakers and will cooperate with interested regional partners. Related Video: News Source: Daimler Green Audi BMW Ford Mercedes-Benz Porsche Volkswagen Electric fast charging