2004 Ford Ranger Xlt Extended Cab Pickup 2-door 4.0l on 2040-cars

Auto blog

2015 Ford Mustang prototype spotted on the street

Our trusty spy photographers have snapped the first photos of the 2015 Ford Mustang prototype out on public streets. With nearly every square inch of the machine covered in heavy camouflage, it's difficult to discern details, but we can see smallish horizontal headlamps at work in the coupe's nose. Ford has made it clear that modern lighting technology will allow the company to get away from large, expensive headlamp arrays in the near future, and the 2015 Mustang may very well be the first of the automaker's products to bow with the new tech. The philosophy was first displayed on the very attractive Evos Concept.
The extensive cladding doesn't extend all the way to the prototype's rockers in the instance, giving us a look at the heavily-sculpted sills. Overall, this test car looks considerably smaller than the current generation Mustang, and elements like a short front overhang and beefy dual-piston calipers give us plenty of hope for the future model. Of course, reports that the 2015 Mustang will bow with an independent rear suspension and EcoBoost power certainly don't hurt our feelings, either.

UK's Loughborough University improving Ford's 1.0-litre EcoBoost engine

How much does it cost for college students to study zero emissions vehicles? At Loughborough University in the UK, a new Advanced Propulsion Centre (APC) is being built at a cost of a billion pounds ($1.7 billion US). The school has just announce that it will fund a number of grad student positions and is creating a new Chair in Advanced Propulsion Systems, which sounds like a fun job to us. We're weird like that. There will be a total of four professor-type positions in the new Center, including the chair, all focused on teaching students about low-carbon vehicle technologies, specifically electric and hybrid ones. The school is investing 1.5 million pounds ($2.5 million) for the new positions. There is a bigger picture as well, a 26-million pound ($44 million) Advanced Combustion Turbocharged Integrated Variable-valvetrain Engine (ACTIVE) project, which uses funds not only from the school but also from Ford and others. The point of ACTIVE is to study Ford's 1.0-liter EcoBoost engine and "improve further its efficiency and ensure it exceeds 2020 emission regulations." This is already a popular engine for the automaker, and it will need to stay at the bleeding edge of efficiency to remain as important in 2020 as it is today. Loughborough University has been working with automakers on advanced energy technologies for years, for example with Rolls-Royce and fuel cells in 2007 and the Lotus Hotfire engine in 2008. University invests GBP1.5M in advanced propulsion research to advance zero emissions vehicles challenge Loughborough University is investing GBP1.5M over five years in strategic research appointments, inspired by the global challenge to develop the new advanced propulsion technologies required for the move to zero emission vehicles. These appointments reinforce the University's world-class research in low-carbon vehicle technologies, adding new dimensions concerned with electric and hybrid drives. Four appointments will be made, including a Chair in Advanced Propulsion Systems, supported by a number of PhD studentships. The GBP1.5M investment is part of the University's commitment to the recently announced Advanced Propulsion Centre (APC) to support the development of new supply chains for low carbon vehicles. APC is an initiative established by the Automotive Council that will see GBP1 billion of investment from government and industry over the next 10 years.

Ford F-150 production hampered by frame shortage

If anyone has questions about how Ford's new aluminum-bodied F-150 will hold up, it's not buyers. Orders are so strong for the fullsize pickup that competitors General Motors and Ram are discounting their offerings to hold onto market share. It's a shame for the Blue Oval then, that it can't build all the trucks it needs because frame supplier Metalsa isn't delivering enough frames. Neither Ford nor Metalsa has said what the problem is, but Ford employees are at Metalsa's Kentucky plant trying to get it sorted out, Automotive News reports. Overtime shifts at the Dearborn Truck Plant and the Kansas City Assembly Plant have been canceled due to the shortage that's been a problem for at least two months now. The issue is exacerbated by this being the changeover period in production from the old model to the new, which comes with its own issues. That would help explain why even though Dearborn production finished ramping up in January, output in April was down 9.2 percent compared to last year, according to AN. Transaction prices are up for the new truck, but overall F-150 production in Q1 was down 40 percent, and missing product means missing profits. Combined with the production drop for the new Ford Edge, the company's Q1 bottom line was robbed of $1 billion. It isn't clear when the frame issue will be solved, but workers at the plants are ready to run "all-out" when it is. Related Video: News Source: Automotive News - sub. req.Image Credit: Copyright 2015 Drew Phillips / AOL Plants/Manufacturing Ford Truck kansas city assembly plant