2002 Ford Ranger Xlt Extended Cab Pickup 4-door 4.0l on 2040-cars

Auto blog

GM being sued over imploding Bosch fuel pumps in Duramax diesel trucks

Texas-based law firm Hilliard Martinez Gonzalez (HMG) this week filed a class-action lawsuit against General Motors over an alleged issue with Bosch CP4 fuel pumps. The suit claims Bosch designed the CP4 pump to work with European diesel fuel, which is thicker than U.S. diesel. When GM installed that pump in the 6.6-liter Duramax engine used from the 2011 to 2016 model years, the lawsuit claims the thinner U.S. fuel didn't provide enough lubrication, allowing air pockets to form in the fuel pump. That, in turn, allegedly let metal rub against metal inside the pump, causing the pump to eventually disintegrate and "send thousands of metal shards into the fuel injection system and every part of the engine." The Detroit News reported on the most recent lawsuit filed in Michigan's Eastern District Court, but the case is another piece of nationwide legal maneuvering going on since at least last September. Every U.S. truck maker used the Bosch CP4 fuel pump, and HMG originally went after all of them, as well as Bosch. On September 30, 2018, HMG filed a class-action suit in Texas on behalf of eight plaintiffs. The law firm wanted to prosecute the affair under RICO — the Racketeer Influenced and Corrupt Organizations Act — and named 10 defendants: FCA US LLC, FCA North America Holdings, LLC, F/K/A Chrysler Group, Fiat Chrysler Automobiles, N.V., Ford Motor Company, General Motors LLC, Robert Bosch GmbH, Robert Bosch LLC, VM North America, Inc., and VM Motori S.P.A.  The firm filed another suit in Florida on Nov. 2, 2018, against the same 10 defendants, again under the RICO statute, this time on behalf of more than 30 plaintiffs. We don't know how many other suits might have been filed, but the two suits mentioned apparently didn't have legs — the courts dismissed both quickly. So HMG shifted its strategy away from the RICO angle, and focused its efforts on GM, filing suit in California on Nov. 20, 2018. Instead of trying to catch 10 fish with a small net, HMG wants to score one fish with a big net. The results have borne more promise for the plaintiffs. In July this year, a judge in California denied GM's motion to dismiss, noting "the alleged defect is central to the vehicleÂ’s function." This latest suit filed on Aug. 6 in Detroit singles out GM again.  The Bosch CP4 is known to be problematic, however.

Ford drops Focus RS teaser ahead of Feb 3 reveal

Ford is trying to get us hyped for the unveiling of the latest Focus RS on February 3 with this new video teaser. The clip showcases the hot hatch doing some big slides in the wet and dry during testing in Europe and the US, and it definitely makes us even more curious about what the Blue Oval has in store with the RS. Even in this short teaser, Ford continues to dress the more aggressive nose of the Focus RS in camouflage, like the previous test cars. Unfortunately, what's going on under all of that concealment remains a bit of a mystery. Rumors suggest the RS likely uses a tuned version of the Blue Oval's 2.3-liter turbocharged four-cylinder estimated to make between 325 and 350 horsepower. A speculated torque-vectoring all-wheel-drive system should keep fears of torque steer at bay, and larger brakes on the test mules indicate that bringing it all to a halt shouldn't be a problem, either. We do know that the hotter Focus will be among the "more than 12" vehicles that the new Ford Performance division will develop through 2020, and the RS will come to the US for the first time. However, US-spec RS models will likely be imported from Europe, which will keep numbers here low and will mean prices estimated to be around $30,000 or more. Until the official specs become available, at least enjoy watching this hot hatch's ability to slide.

NHTSA probes 2014 Ford Edge Sport 22-inch alloy wheels

The National Highway Traffic Safety Administration is opening a preliminary evaluation into the 2014 Ford Edge Sport for the possibility its 22-inch wheels could break while on the road. This affects an estimated 20,000 examples of the crossover, according to NHTSA. The case that instigated this evaluation was submitted to NHTSA in November 2014. The driver reported that the front, right corner of the vehicle suddenly dipped, and the Edge went into a field. No one was harmed, but upon investigation, the wheel had broken into two pieces, according to The Detroit News. When this happened, this crossover had been driven an estimated 8,500 miles. NHTSA's preliminary evaluations are meant "to assess the scope, frequency, and safety-related consequences of the alleged defect in the subject vehicles." If a problem is discovered during the investigation, this process can lead to a recall. Ford spokesperson Kelli Felker told Autoblog, "We will cooperate with NHTSA on this investigation, as we always do." INVESTIGATION Subject : Wheel Separation Date Investigation Opened: MAY 20, 2015 Date Investigation Closed: Open NHTSA Action Number: PE15020 Component(s): WHEELS All Products Associated with this Investigation Vehicle Make Model Model Year(s) FORD EDGE 2014 Details Manufacturer: Ford Motor Company SUMMARY: On November 29, 2014, ODI received a complaint (ODI No. 10661278) reporting the sudden failure of an original equipment 22-inch alloy wheel rim that failed on a model year 2014 Ford Edge. The right-front corner of the vehicle suddenly dropped while driving, causing the vehicle to drive off the road and into a field. The right-front wheel rim was found to have broken into two pieces. The owner said that there was no prior warning or wheel related problems with the vehicle. The vehicle had been driven approximately 8,500 miles at the time of the incident. A preliminary evaluation has been opened to assess the scope, frequency and safety-related consequences of the alleged defect in the subject vehicles. Related Video: