Ford F-100 Original Custom Cab W/overdrive Trans & on 2040-cars
Houston, Texas, United States
I found this San Jose California built F-100 in Southern California in 2000 and purchased it from a private individual.
Ford Other Pickups for Sale
Ford fairlane 500(US $2,000.00)
Ford other four door sedan(US $12,000.00)
Ford other standard(US $10,000.00)
Ford torino 1975 ford elite coupe(US $2,000.00)
Ford box truck low low miles 18 ft(US $2,000.00)
Ford other hi-boy(US $10,000.00)
Auto Services in Texas
Wynn`s Automotive Service ★★★★★
Westside Trim & Glass ★★★★★
Wash Me Car Salon ★★★★★
Vernon & Fletcher Automotive ★★★★★
Vehicle Inspections By Mogo ★★★★★
Two Brothers Auto Body ★★★★★
Auto blog
Ford recalling select Taurus, Explorer and Lincoln MKS models over fuel tanks
Sun, 31 Mar 2013Ford is recalling certain 2012 Taurus, 2013 Explorer and 2012 Lincoln MKS models over fuel tank concerns. According to the National Highway Traffic Safety Administration, vehicles built between July 19, 2011 and March 15, 2012 may have been built with fuel tanks that have a "marginally sealed seam" on the side. Those seams may not provide the strength necessary to protect the tank from rupture during a collision. They may also leak. The recall covers a total of 3,037 vehicles. NHTSA says that leaked fuel, in the presence of an ignition source, could easily cause a fire.
Dealers will inspect the tanks and replace them as need be free of charge. Owners can expect to be notified once the campaign begins on or around April 22, 2013. You can read the full NHTSA recall notice below for more information.
Ford Mustang Mach-E fails Sweden's moose test
Wed, Sep 29 2021The infamous moose test has claimed another casualty. This time it's the Ford Mustang Mach-E AWD Long Range, which was tested in an electric four-way alongside the Tesla Model Y, Hyundai Ioniq 5 and Skoda Enyaq iV (an electric utility vehicle closely related to the Volkswagen ID.4 that is sold in the United States). According to the Swedish testers at Teknikens Varld, Ford's electric car not only failed to hit the speed necessary for a passing grade, it didn't perform well at slower speeds, either. To pass the outlet's moose test, a car has to complete a rapid left-right-straight S-shaped pattern marked by cones at a speed of at least 72 km/h (44.7 miles per hour). The test is designed to mimic the type of avoidance maneuver a driver would have to take in order to avoid hitting something that wandered into the road, which in Sweden may be a moose but could just as easily be a deer or some other member of the animal kingdom elsewhere in the world, or possibly a child or car backing into the motorway. Not only is the maneuver very aggressive, it's also performed with weights belted into each seat and more weight added to the cargo area to hit the vehicle's maximum allowable carrying capacity. The Mustang Mach-E only managed to complete the moose test at 68 km/h (42.3 mph), well below the passing-grade threshold. Even at much lower speeds, Teknikens Varld says the Mach-E (which boasts the highest carrying capacity and was therefore loaded with more weight than the rest of the vehicles tested in this quartet) is "too soft in the chassis" and suffers from "too slow steering." Proving that it is indeed possible to pass the test, the Hyundai and Skoda completed the maneuver at the 44.7-mph figure required for a passing grade and the Tesla did it at 46.6 mph, albeit with less weight in the cargo area. It's not clear whether other versions of the Mustang Mach-E would pass the test. It's also unknown if Ford will make any changes to its chassis tuning or electronic stability control software, as some other automakers have done after a poor performance from Teknikens Varld, to improve its performance in the moose test. Related video:
Plug In 2014: ALTe ready to join Ford's EQVM to convert, sell F-150 PHEV [w/video]
Mon, Aug 4 2014It's been a while since we've checked in with ALTe and its plans to convert big work vehicles like the Ford F-150 into plug-in hybrids. So, when we saw a demonstration vehicle sitting outside the San Jose Convention Center at the Plug In 2014 Conference last week, we had to get a closer look. When we did, we realized that it's been quite some time since we've been in a Ride & Drive vehicle that was all beat to heck. It's been quite some time since we've been in a Ride & Drive vehicle that was all beat to heck. The reason for the well-worn F-150 with 30,000 miles on it is that ALTe has been showing off its extended-range EV technology to lots of people all around the country, and Kyle Maki has been the man on the scene more often than not. "This one, I've taken all over the country," he told AutoblogGreen. "I've wore out that seat, I think. The only reason this one wasn't driven here was because we were in Charlotte [NC] last week and I didn't want to take a chance and not make it in time for this event." In other words, ALTe is out there, ginning up excitement for the idea of a plug-in hybrid Ford with an electric range of up to 40 miles and which can then continue on gas for another 360 miles at around about 25 miles per gallon. ALTe wants to not only convert new vehicles but it also offers retrofits for fleets that are happy with their current fleet. The company offers converted versions of the Ford E350 and E450 utility vehicles now but the near-mythical F-150 PHEV is still "coming soon." Yes, orders are now being accepted, but you will be forgiven if you think this is all happening on a slow time scale. There are simply a lot of things to do before ALTe can sell the truck. ALTe is currently attempting to join Ford's EQVM program, which is the electric version of the standard Qualified Vehicle Modifiers program. The QVM program requires coachbuilders to "be successfully evaluated by Ford Motor Company on criteria such as engineering, the manufacturing process, quality control, and adherence to Ford and Lincoln Divisions guidelines." Qualified applicants must also meet all applicable Federal Motor Vehicle Safety Standards, conform to Ford/Lincoln conversion guidelines and agree to be inspected annually as well as have a "commitment to continuous improvement." Maki has a simpler explanation. "It basically means you're a preferred supplier, a Tier 1, if you will," he said.
