2010 Ford Mustang Gt Coupe Only 28k Miles! Navigation Automatic Ford Sync Wow$$ on 2040-cars

Auto blog

Detroit 3 to implement delayed unified towing standards for 2015

Car buyers have a responsibility to be well-informed consumers. That's not always a very simple task, but some guidelines are self-evident. If you live in a very snowy climate, you generally know a Ford Mustang or Chevrolet Camaro might not be as viable a vehicle choice as an all-wheel drive Explorer or Traverse, for example. If you want a fuel-efficient car, it's generally a good idea to know the difference between a diesel and a hybrid. But what if it's kind of tough to be an informed consumer? What if the information you need is more difficult to come by, or worse, based on different standards for each vehicle? Well, in that case, you might be a truck shopper. For years, customers of light-duty pickups have had to suffer through different ratings of towing capacities for each brand. For 2015 model year trucks, though, that will no longer be a problem. According to Automotive News, General Motors, Ford and Chrysler Group have announced that starting with next year's models, a common standard will be used to measure towing capacity. The Detroit Three will join Toyota, which adopted the Society of Automotive Engineers' so-called SAE J2807 standards way back in 2011. The standard was originally supposed to be in place for MY2013, but concerns that it would lower the overall stated capacity for trucks led Detroit automakers to pass. Ford originally passed, claiming it'd wait until its new F-150 was launched to adopt the new standards, leading GM and Ram to follow suit. Nissan, meanwhile, has said it will adopt the new standards as its vehicles are updated, meaning the company's next-generation Titan should adhere to the same tow ratings as its competitors. While the adoption of SAE J2807 will be helpful for light-duty customers, those interested in bigger trucks will still be left with differing standards. There is no sign of the new tow standards being adopted for the heavy-duty market.

Expert: 54.5 mpg CAFE standard can be reached without many plug-ins

Johnson Controls executive Brian Kesseler isn't likely to get any holiday presents this year from Nissan chief Carlos Ghosn or Tesla Motors head Elon Musk, but lots of other folks might be happy with what he has to say about automakers' efforts to reach stricter fleetwide fuel-economy standards. Speaking at the Automotive News World Congress, Kesseler said automakers wouldn't need to sell an extensive number of plug-in vehicles in order to meet the 54.5 mile per gallon Corporate Average Fuel Economy (CAFE) standard the US government set in 2012 for 2025 model-year vehicles. In fact, he said, components such as stop-start engine technology, turbochargers and direct injection may actually do the trick. Already, things like smaller engine sizes and lighter cars are already playing major roles in spurring fuel-efficiency gains. Of course, Johnson Controls sells batteries specially built for stop-start systems, so Kesseler does have a bit of skin in this game. The 54.5-mpg CAFE standard equates to about a 40-mpg "real world" fuel-efficiency level. To put that into perspective, the Environmental Protection Agency (EPA) said in a report late last year that model-year 2013 average fuel economy was an even 24 mpg. That was up from 23.6 mpg for the 2012 model year and 22.4 mpg for 2011. News Source: Automotive NewsImage Credit: AP Government/Legal Green Ford Fuel Efficiency mpg CAFE standards ecoboost johnson controls

A cool boost to turbocharger performance

Since the advent of the forced-induction engine, we have been looking for ways to get every drop of performance we can. There are many approaches to getting additional power using better intercooling, water injection, or even adding nitrous oxide. One take on a short instant burst of power is being researched by Mahle and involves providing supercooled air to an engine, which allows it to burn a leaner fuel mixture and produce more power. The supercooling idea is not new and was examined by Ford in 1993 on the Mustang Mach III concept car, then brought up again in 2003 with the SVT F-150 Lightning concept. Ford called its system the SuperCooler; it was designed to work with any turbocharged or supercharged engine equipped with a water-to-air intercooler. The system on the Lightning concept used a small tank of antifreeze that was hooked up to the truck air conditioning compressor. The air conditioning compressor cooled the antifreeze down to about 30 degrees. The other side of the tank was hooked up to the air-to-water intercooler, which usually had a temperature over 100 degrees. Once the antifreeze was circulated from the tank into the intercooler, it would lower the intercooler temperature and provide for a cooler, denser air charge into the engine; the result was around 50 extra horsepower for a burst of about 30 seconds to a minute, depending on the size of the tank. The system for the Lightning was to be offered as a $750 option and would have been targeted towards drag racers and the like, as it could be used for a run down the drag strip and then re-cooled by the time the truck was back in line. The system was fairly non-intrusive – it only weighed about 25 pounds and did not require a new compressor or intercooler. But as with many concepts, it was ultimately scrapped. The technology was always stuck in the back of my mind, but with larger and more powerful engines being produced it could not find its place. With the advent of new fuel economy standards, we have seen small-displacement turbocharged engines pop up and they seem like the perfect candidate for this type of technology. Ford's EcoBoost 1.0-liter three-cylinder turbocharged engine, as used in the Fiesta and Focus, is one such candidate for this technology. It would add a negligent amount of weight but could provide a boost of 10 to 20 horsepower when needed, like merging onto the highway or catching up to traffic.