1926 Ford Model T on 2040-cars

Auto blog

Ford recalls 600,000 older-model sedans for braking issue

Ford is recalling 600,166 older-model Ford, Lincoln and Mercury vehicles over an issue that could affect braking and increase the risk of a crash. The safety recall covers certain Ford Fusion, Mercury Milan and Lincoln MKZ sedans from the 2006 through 2010 model years that were built at Ford’s Hermosillo Assembly Plant in Mexico between Feb. 22, 2006, and July 15, 2009. Ford says a valve that is normally closed inside the hydraulic control unit may get stuck in the open position or be slow to close, which could make it harder to engage the brakes and increase risk of a crash. Ford says itÂ’s aware of 15 reports of accidents and two injuries possibly related to the issue. Dealers will inspect the hydraulic control unit for signs of the problem and replace it, if necessary. The dealers will pressure-flush the system with brake fluid and replace the reservoir cap with a new one. Ford is also issuing a small recall of 33 of its 2020 F-150 trucks in the U.S. and 51 in Canada over potentially damaged spare tires. It says the bead area on the tires may have been damaged when it was mounted onto the wheel assembly, leaving it vulnerable to corrosion, separation of the bead wire and ultimately a rapid loss of air pressure and detachment from the wheel. Dealers will replace the spare tire. Affected vehicles were built at the Dearborn Truck Plant from Nov. 10-21 of this year.

Shelby GT350R offers first mass-produced carbon fiber wheels

In the world of race engineering, reducing total weight is good, but reducing unsprung weight is flippin' fantastic. That's the reason Ford is pushing the envelope in terms of technology for the Shelby GT350R's wheels. Joining the likes of Koenigsegg in the offering, Ford has teamed with Australian outfit Carbon Revolution to produce the CF rollers en masse for the first time. Destined for the hubs of the new Shelby GT350R, the new hoops weigh just 18 pounds each, versus the 33-lbs weight of a similar aluminum wheel. On top of slashing up to 60 pounds in unsprung weight, there's such a reduction in rotational inertia – 40 percent, versus aluminum wheels – that Ford actually has to recalibrate the magnetic ride control system and springs. Thanks to, we're guessing, scenes of crashed Formula One cars disintegrating and spewing shards of carbon fiber all over the track, Ford seems quite keen to do away with the idea that CF is strong, but brittle. The company conducted extensive shock testing, ramming a wheel into a curb at speed. According to the Blue Oval, the lightweight wheel allowed the suspension to respond so quickly that the impact was "greatly diminished," causing the tester to run the experiment again, thinking there'd been a mistake. After recording brake rotor temperatures of 900 degrees Celsius (over 1,650 degrees Fahrenheit, or well past the point that aluminum or magnesium would melt) during testing, Ford and Carbon Revolution actually redesigned the wheels to "a thermal standard more suitable for motorsports," by adding an "incredibly thin, nearly diamond-hard coating that reliably shields the resin from heat." The same process was used to protect engine turbine blades on the Space Shuttle. While the work by Ford and Carbon Revolution should make GT350R customers excited, the work being done here could have serious implications for performance cars in the future. That's the real takeaway here, and is something that should leave fans of all performance vehicles excited.

FCA UConnect fiasco could set over-the-air updates back years

Since cars have become more software dependent, most major automakers have been inching toward enabling over-the-air updates to keep vehicle electronics, ranging from infotainment systems to safety features, current. But there are only two car companies — Fiat Chrysler and Ford —± currently doing OTA updates, and on a limited basis. GM CEO Mary Barra announced last summer that the automaker will launch a new EV architecture and infotainment system capable of over-the-air updates "before 2020." The one exception, per usual, is Tesla. Since the release of the Model S almost six years ago, the maverick EV automaker has made routine OTA software updates a core part of its vehicle platforms and value proposition, and has sent out updates for everything from adjusting ride height to enabling Autopilot, largely without incident. When I've asked automakers why they can't do the same thing, I've heard reasons ranging from running afoul of their dealers (and archiac regulation) to security concerns. Automakers like Ford and General Motors say they want to act like tech companies, which routinely send out OTA updates for a wide range of devices, but overall the car industry still moves at a very cautious snail's pace. And when automakers do try to move faster and take more risks — unlike with a smartphone update, which people bitch about but live with — the consequences can be significant when things go wrong. That's the case with Fiat Chrysler America and its recent public-relations nightmare when an OTA update went awry. The update went out at the end of last week for the Uconnect system in late-model vehicles, and it made head units go into a near continuous reboot, which caused owners to not only lose access to entertainment features, but also critical functions like emergency assistance. Almost immediately, owners took to Twitter to express outrage, and FCA was caught flatfooted. A tweet went out on Monday on the UconnectCares Twitter account that read, "Certain 2017 & 2018 Uconnect systems may experience a reboot every 45-60 seconds. Our Engineering teams are investigating the cause and working towards a resolution.