1923 Ford T Bucket Hot Rod 396 Chevy,a/t on 2040-cars

Auto blog

A cool boost to turbocharger performance

Since the advent of the forced-induction engine, we have been looking for ways to get every drop of performance we can. There are many approaches to getting additional power using better intercooling, water injection, or even adding nitrous oxide. One take on a short instant burst of power is being researched by Mahle and involves providing supercooled air to an engine, which allows it to burn a leaner fuel mixture and produce more power. The supercooling idea is not new and was examined by Ford in 1993 on the Mustang Mach III concept car, then brought up again in 2003 with the SVT F-150 Lightning concept. Ford called its system the SuperCooler; it was designed to work with any turbocharged or supercharged engine equipped with a water-to-air intercooler. The system on the Lightning concept used a small tank of antifreeze that was hooked up to the truck air conditioning compressor. The air conditioning compressor cooled the antifreeze down to about 30 degrees. The other side of the tank was hooked up to the air-to-water intercooler, which usually had a temperature over 100 degrees. Once the antifreeze was circulated from the tank into the intercooler, it would lower the intercooler temperature and provide for a cooler, denser air charge into the engine; the result was around 50 extra horsepower for a burst of about 30 seconds to a minute, depending on the size of the tank. The system for the Lightning was to be offered as a $750 option and would have been targeted towards drag racers and the like, as it could be used for a run down the drag strip and then re-cooled by the time the truck was back in line. The system was fairly non-intrusive – it only weighed about 25 pounds and did not require a new compressor or intercooler. But as with many concepts, it was ultimately scrapped. The technology was always stuck in the back of my mind, but with larger and more powerful engines being produced it could not find its place. With the advent of new fuel economy standards, we have seen small-displacement turbocharged engines pop up and they seem like the perfect candidate for this type of technology. Ford's EcoBoost 1.0-liter three-cylinder turbocharged engine, as used in the Fiesta and Focus, is one such candidate for this technology. It would add a negligent amount of weight but could provide a boost of 10 to 20 horsepower when needed, like merging onto the highway or catching up to traffic.

Ford F-150 SVT Raptor sales jumping to new heights

Ford can't seem to build F-150 SVT Raptors fast enough. The off-road-ready trucks have been one of the Blue Oval's most reliable sellers, with record sales in eight of the last 10 months and a 14-percent jump in 2013. That's impressive enough, considering that the least expensive Raptor starts at $44,000. Factor in the modded F-150's fuel economy (it's rated at 11 miles per gallon in the city and 16 on the highway) and a national average gas price, as of this writing, of $3.55 per gallon, and its success is as unlikely as Ford's home team, the Detroit Lions, winning the Super Bowl this year (sorry, Lions fans, we're just quoting the experts in Vegas...).
Yet for some reason, Raptors spend an average of just 15 days on dealer lots before being snapped up, which is a quarter of the 60-day industry average. According to Ford's truck group marketing manager, Doug Scott, it's capability that keeps the Raptor selling strong. "What's helping drive Raptor sales is that Raptor delivers unmatched off-road performance to our customers. Raptor is also proof of our commitment to offer a truck for every customer and continuously improving them to meet our customers' evolving needs."
To address the strong demand for Raptors, Ford will bump production from three trucks per hour to five. Not much, we agree. But building an extra 48 trucks per day, at most, seems like a prudent way of addressing demand without oversaturating what is ultimately a niche market. Check out the press release below for more.

Ford EcoBoost V6 hits the dyno before hitting the track

Ford Racing just unveiled the Riley Daytona Prototype that will make its racing in the United SportsCar Racing Championship Rolex 24 at Daytona in January, and now it has released a video showing development of twin-turbo 3.5-liter EcoBoost V6 that powers the car. Using the same block and heads that can be found on a production Ford Taurus SHO, this new racecar benefits from the collaboration between Ford Racing and Ford powertrain engineers.
While we still don't know what kind of power this engine is putting out, it has definitely gotten a workout at Ford's 17G dyno. This area deep within Ford allows the automaker's racing program to work hand-in-hand with production engine programs, which can be a benefit to racing operations and production cars alike. Scroll down to hear a few people from Ford talk about the crosspollination between its racing and engine teams and watch the EcoBoost get red hot on the dyno.