1929 Model A Tutor In Very Good Looking And Driving Condition. New Tires. on 2040-cars

Auto blog

Ford launches pair of recalls affecting fullsize sedans and Transit Connect van

Ford has announced a pair of pretty significant recalls affecting the 2010-2013 Ford Taurus and Police Interceptor, as well as their platform-mate, the Lincoln MKS. A separate recall covers the 2014 Transit Connect. The fullsize sedans include 205,000 vehicles built at Chicago Assembly over a variety of timeframes, ranging between December 1, 2009 and November 30, 2012. The vehicles, 194,889 of which were sold in the United States, have an issue with the spring controls on the interior door handles that could cause the door to open in a side-impact crash. The Transit Connect recall, meanwhile, includes 16,100 vans built between November 6, 2013 and September 20,2014 at the company's Valencia, Spain factory. In these vehicles, the seatbelt fasteners may not have been tightened properly, which could cause them to loosen over time, a condition that's obviously bad news in the event of a crash. Ford says it is not aware of any accidents, injuries or crashes in either recall. Owners will, of course, be notified and asked to report in for inspections and if necessary, free replacements. Scroll down for the full press release from Ford, which includes the complete breakdown of dates during which the affected sedans were built in Chicago. JAN 28, 2015 | DEARBORN, MICH. FORD ISSUES TWO SAFETY RECALLS Ford is issuing two safety recalls. No accidents or injuries are attributed to either of these conditions. Details are as follows: Ford issues safety recall for certain 2010-2013 Ford Taurus, Lincoln MKS and Ford Police Interceptor sedans for interior door handle issue Ford is issuing a safety recall for approximately 205,000 2010-2013 Ford Taurus, Lincoln MKS and Ford Police Interceptor sedans due to an issue with the spring that controls the interior door handles. If the spring is unseated, the door may become unlatched in a side-impact crash, increasing the risk of injury. Ford is not aware of any accidents or injuries related to this condition. Affected vehicles include certain 2010-2013 Ford Taurus vehicles built Dec. 1, 2009 to July 31, 2010 and Feb. 1, 2011 to Nov. 30, 2012 at Chicago Assembly Plant; certain 2010-2013 Lincoln MKS vehicles built June 2, 2011 to Oct. 31, 2011 at Chicago Assembly Plant; and certain 2010-2013 Ford Police Interceptor sedans built Dec. 1, 2009 to July 31, 2010 and Feb. 1, 2011 to Nov. 30, 2012 at Chicago Assembly Plant.

Ford director says company has big efficiency plans, but no dedicated EV

The annual autofest known as the North American International Auto Show previews a plethora of exciting new products that we'll see and drive later in the year, from tiny urban commuters to family sedans and crossovers to hard-working big pickups and SUVs. It's also a once-a-year cornucopia of auto executives and leaders from around the world. "There will be some really fun stuff that you'll hear about in the future" - Ford's Kevin Layden So, in-between dozens of cool new-product unveilings on rotating stages during the two press days preceding the public show, we auto scribes grab what planned and impromptu interviews we can. Sessions with top industry leaders can be hard to get, but I was able to score a seat in a group session with then-General Motors North America president (now executive VP of global product development) Mark Reuss, and I also managed brief one-on-ones with a trio of vehicle electrification leaders, one each from Ford, BMW and GM, and what they said then remains relevant now. First up is Kevin Layden, Ford's Director of Electrified Powertrain Engineering. ABG: Where will Ford go beyond its current Focus EV and hybrids, and will there be a Ford EV and/or hybrid on its own energy-optimized platform one day. KL: We don't want to do a dedicated electric vehicle with all the development costs borne by a niche product. At the Michigan Assembly plant right now we're building the Focus electric, PHEV and EcoBoost on the same assembly line. Also the C-Max, with both a hybrid and an Energi plug-in, and we use that same power pack in the Fusion Hybrid and Energi. We want to be, "The power of choice" [a Ford marketing slogan], so having that choice for customers is very important. And if I want to sell the Fusion, Focus and C-Max globally, we can use these power packs wherever it makes sense. So as we go forward, you'll see us proliferating the power packs we have today. Then the question is, what do we do next? There will be some really fun stuff that you'll hear about in the future. ABG: Is the efficiency difference between a dedicated ultra-efficient vehicle platform and a shared multi-use platform getting smaller as all platforms get more efficient? KL: Exactly. Were going through aero studies now on wheels and tires and hood sealers on base vehicles. We have full aerodynamic wind tunnel studies going on with the base Focus and C-Max, so all of that [aerodynamic improvement] will be there for EVs.

Weekly Recap: Toyota, Mazda team up to 'make cars better'

Toyota and Mazda are teaming for a noble purpose: to "make cars better." That's how the two Japanese automakers termed their partnership, which was announced this week. So what does this actually mean? The companies said they will set up a joint committee to look for areas of cooperation and named safety and the environment as issues they plan to tackle. From a product perspective, it's believed that Toyota is interested in Mazda's Skyactive engine portfolio. In turn, Mazda has its eye on Toyota's fuel-cell and plug-in hybrid technology. While more specifics were not confirmed, the companies said the "agreement will go beyond the traditional framework of cooperation," and it has the potential to be a long-range partnership. "The main purpose of this initiative is to enhance the appeal of our cars," Toyota president Akio Toyoda said at the announcement. Previously, Mazda has licensed Toyota's hybrid tech and assembled compact cars for Toyota in Mexico. Akio Toyoda said these projects "triggered" the automakers to explore further collaboration. Dave Sullivan, product analysis manager for AutoPacific, said the tie-up echoes Daimler's wide-ranging work with the Renault-Nissan alliance. "This could be a well-groomed match due to each having very unique skill sets," he said. OTHER NEWS & NOTES Volvo selects South Carolina for US factory Volvo confirmed this week that it will build its first US factory in South Carolina, with construction set to begin this fall. The company first revealed plans in March, though it didn't announce a site. The plant will have initial annual production of 100,000 units, though the vehicle or vehicles to be assembled were not specified. The factory, located near Charleston, will open in 2018 and ultimately employ 4,000 people. The facility will help Volvo continue its growth strategy, which includes strengthening its presence in the US market, where it wants to sell more than 100,000 cars per year. "Building a plant in the US is a reflection of Volvo Cars' commitment to the US and the key role the US plays in our growth objectives," Lex Kerssemakers, senior vice president, Americas, said in a statement. Ford GT spied on the road The 2017 Ford GT was spotted testing around the Blue Oval's headquarters in Dearborn, MI, this week. The raw body panels were exposed, and they lacked paint or camouflage. It's the first time the GT has been captured on the street after a spring of auto show reveals.