1928 Dodge Standard 6 Classic Antique Rat Rod on 2040-cars

Auto blog

NHTSA advances investigation of Ford Crown Victoria headlights

The National Highway Traffic Safety Administration is opening a preliminary evaluation into reports of suddenly failing headlights on 517,945 examples of the 2003-2005 Ford Crown Victoria and Mercury Grand Marquis. The government started looking into this problem in April when the North Carolina Consumers Council filed a defect petition with the agency. Now, the inquiry has moved to the next step. According to NHTSA's documentation (as a PDF), it examined its own database and worked with Ford to come up with a total of 3,609 complaints of the front lighting control module suddenly failing. When this happens, drivers lose the low-beam headlights, but the high-beams can be used by holding the stalk. Sometimes turning the switch off and on fixes the issue. Additionally, there are 15 allegations of crashes, and one reported shoulder injury. NHTSA's preliminary evaluations "evaluate the scope, frequency, and consequence of the alleged defect" and don't necessarily lead to a recall. NHTSA looked into this problem once before in 2008 and 2009 and decided that a recall wasn't necessary. Ford also extended the warranty on the front lighting control module for these vehicles. INVESTIGATION Subject : Loss of headlights Date Investigation Opened: AUG 10, 2015 Date Investigation Closed: Open NHTSA Action Number: PE15028 Component(s): EXTERIOR LIGHTING All Products Associated with this Investigation Vehicle Make Model Model Year(s) FORD CROWN VICTORIA 2003-2005 MERCURY GRAND MARQUIS 2003-2005 Details Manufacturer: Ford Motor Company SUMMARY: After receiving a defect petition (DP15002) concerning the loss of headlights and other exterior lighting in model year (MY) 2003-2005 Ford Crown Victoria and Mercury Grand Marquis vehicles, the Office of Defects Investigation (ODI) analyzed Vehicle Owner Questionnaire (VOQ) complaints received from consumers and identified a total of 605 reports (for all submission dates) alleging headlight failure. The complaints indicate failures of both low beam headlights typically while driving, a defect condition that was evaluated under a prior ODI investigation (PE08066). Most consumer VOQs indicate that the headlights failed suddenly and without warning leaving the driver with no forward lighting, however some report the headlights flickered or dimmed prior to turning off. In some cases drivers were able to turn the headlights back on after a period of time while others reported the headlights would not come back on at all.

Bodie Stroud seriously updates the 1956 Ford F-100 into the BSI X-100

If you thought pickups could use a lot more love in the resto-mod world, then Bodie Stroud – he of "The Real Thing" Mustang – has something for you: the BSI X-100. His team starts with the body of a 1956 Ford F-100, but the sheetmetal is about all the nostalgia you're going to get; the body, tweaked with a chopped hood and a larger rear window on the cab, sits on a custom steel ladder-frame chassis. Out back is a one-piece, tubbed bed, and behind that are taillights from a 1948 (gasp!) Chevrolet. Under that hood is either a 412-horsepower, 5.0-liter Ford Racing Coyote crate engine, or a supercharged, 6.0-liter, 630-hp Ford Racing Aluminator motor, shifting through a Ford 4R70W four-speed automatic. Inside, the dash is reworked to fit gauges from a Ford F-150 King Ranch Edition, and the bench is swapped out for buckets from a Mustang GT. The independent front and four-link rear suspension are adjustable, helping to make room for staggered wheels - 19 inches in front, 20 inches in back, and larger can be accommodated. Six-piston Wilwood brakes handle the stopping. There's a lot of fabrication and hand-work involved, and it doesn't come cheap: BSI says the turnkey package starts at $180,000. If you've got it, this is an exceptional way to flaunt it. The press release below has all the details. THE BSI 1956 X-100: TIMELESS LINES, MODERN TECH New pickup from Bodie Stroud Industries melds the iconic style of the 1956 F-100 with a cutting-edge chassis and drivetrain to create a hand-built, all-new truck with the performance and reliability of a modern sports car. Sun Valley, Calif. (March, 2015) – In an era when anyone can walk into a dealership with good credit and a yearning to go fast and drive out in a 500+ horsepower sports car, owning and driving something truly unique has become a challenge. With that in mind, the craftsmen at Los Angeles-based Bodie Stroud Industries (BSI) have come up with something truly special – a brand new line of hand-built, turn-key pickups with the looks and sheet metal of an American icon, subtly massaged and fitted to a modern chassis and powered by the latest engine, transmission and electronics from Detroit. The result is the world's first all-new, turn-key 1956 Pickup: the BSI X-100. "When most people think about classic trucks, what comes to mind is usually the 1956 F-100, it's one of the most timeless designs of all time," says BSI founder Bodie Stroud.

We drive the 2016 Ford F-750 Tonka dump truck

The Ford F-750 dump truck stands nearly 10 feet tall and is painted bright yellow. It idles patiently yards away from Ford's test track in Dearborn, MI. "Tonka" is emblazoned on the sides. We pose the obvious question to Ford marketing manager Mark Lowrey: Why do this? "We built this truck to get attention," he replies. And indeed it does. Ford revealed the 2016 F-750 Tonka dump truck in March at an industry show, underscoring that the Blue Oval is back in the business of big trucks after years of teaming with Navistar in a joint venture. The new F-650s and F-750s start rolling off the line at a factory near Cleveland this summer, and the order bank is open now. The trucks come in regular, super, and crew cabs and offer three states of tune for the 6.7-liter Power Stroke V8 turbo diesel, plus a gasoline-fed 6.8-liter V10. Naturally, the Tonka has most powerful diesel mill, with 330 horsepower and 725 pound-feet of torque. The Tonka edition is a paint-and-sticker one-off that Ford is using as a promotional tool. You can't buy one, and it will be touring shows and events throughout the year. Lowrey notes that it calls attention to work trucks in a positive way. The general public usually only sees them when the trucks are blocking the road or making too much noise at a construction site. Tonka trucks, on the other hand, conjure up happy childhood memories. "We're going to do something where someone's going to see this truck and smile," he says. It's hard not to grin as we climb into the cabin of this monster truck. It has a 33,000-pound gross vehicle weight rating and can carry five yards worth of dirt. We're not doing anything like that today – just puttering around Ford's handling circuit inside its product enclave. The course is closed, so even though this track is better suited to calibrating Mustangs, F-150s, and well, almost anything but a dump truck, we're totally relaxed. We depress the button to release the parking brake and are off. The truck is surprisingly easy to drive. The vision ahead is excellent – makes sense, we're nearly one story off the ground, after all. The cabin is simple and cleanly laid out. It looks like a Ford truck, regardless of the size. The diesel engine has a lot of grunt. We can feel the torque. The steering is light, and we have to stomp on the air brakes to slow this thing down. We go 'hot' into a tight corner just for fun. It's not really that fast, but it raises the eyebrows of our film crew, which is set up nearby.