2014 Ford Fusion Titanium on 2040-cars

Auto blog

2015 Ford Mustang EcoBoost Review

"It's just a V6 Mustang." That phrase, so often spoken with derision and disdain, has haunted owners of Ford's more affordable and economical pony car since roughly April of 1964. Even after Dearborn finally paid some attention to its entry-level muscle car by eliminating telltale V6 features – the company fit dual exhausts in place of the single-exit pipe in 2011, negating the budget offering's biggest visual giveaway – the car was still hard pressed to shake its reputation as a hairdresser's car and rental fleet queen. For the Mustang's 50th year in service, Ford went back to the drawing board, we think with the distinct goal of eliminating the stigma of the non-V8 Mustang. While the V6 is still being offered (your local Avis and Enterprise lots wouldn't be the same without them), it's best to think of the new, four-cylinder, turbocharged Mustang EcoBoost as the entry-level model. But will the addition of forced induction – from an engine that will see action in the upcoming, enthusiast-centric Focus RS, no less – be enough to appease those pony car fans that believe that only Mustangs with eight cylinders are worthy of the galloping stallion badge? After a week at the helm, we certainly think it is. The new Mustang's looks have been covered ad nauseam. Chances are good that you either love the fastback styling, or you think the original pony car now looks a lot like a Fusion Coupe. We'll ignore the bigger styling remarks for the 2015 Mustang, and instead, focus on what's done right with the EcoBoost model. Like the V6 before it, certain boxes are correctly ticked. Dual exhausts? Check. 18-inch alloys? Check. (Our EcoBoost Premium model even shares its wheels with the base GT). HID headlamps? Check. Up front, there's a surprisingly meaty chin spoiler while the muscular lines of the 'Stang's long hood tie in nicely with the fastback shape, which terminates in a neat rear spoiler. There's even a body-colored diffuser at the back, between the chromed exhaust tips. The bottom line is, unless you're a true Mustang aficionado, you'll be hard pressed to tell the difference between the turbocharged car and its 435-horsepower brother. Simply sitting in the redesigned cabin isn't enough to give the EcoBoost away, either. The leather-trimmed seats (standard on the Premium trim) are cozy and supportive, with plenty of bolstering to help keep both driver and passenger in place while the 'Stang exhibits its newly enhanced cornering abilities.

Ford shutters Genk assembly plant in Belgium

Ford has become the latest automaker to close one of its European assembly plants. The facility in question is located in the Belgian city of Genk and has been in operation since the early '60s when it started building the Taunus, Ford's first mass-produced, front-drive model. As part of the plan first announced over two years ago, the Genk Body & Assembly Plant is now closing its doors after half a century in the business and over fourteen million vehicles built. Although the plant itself employed some 5,000 workers, once you take into account the suppliers built up around the plant, the overall impact on employment in the area edges closer to 12,000. Genk Body & Assembly had until recently been tasked with producing the Mondeo sedan (which in its current iteration we know as the Fusion) as well as the S-Max and Galaxy minivans. Production of the Mondeo shifted in 2013 to the company's plant in Valencia, Spain, which also handles the Kuga crossover and Transit Connect cargo van, and will soon take over the minivans from Genk as well. The move follows a similar decision undertaken by General Motors to close the Opelwerk plant in Bochum, Germany. It also reflects a scaling down of automobile production in Belgium specifically: although Audi still manufacturers in Brussels and and Volvo in Ghent, Opel closed its plant in Antwerp in 2000 and Renault ceased production in Vilvoorde back in '97. However Ford still maintains its famous proving ground half an hour to the north in Lommel, Belgium. News Source: AutovisieImage Credit: Kristof Van Accom / AFP / Getty Plants/Manufacturing Ford plant ford s-max ford galaxy

Plug In 2014: ALTe ready to join Ford's EQVM to convert, sell F-150 PHEV [w/video]

It's been a while since we've checked in with ALTe and its plans to convert big work vehicles like the Ford F-150 into plug-in hybrids. So, when we saw a demonstration vehicle sitting outside the San Jose Convention Center at the Plug In 2014 Conference last week, we had to get a closer look. When we did, we realized that it's been quite some time since we've been in a Ride & Drive vehicle that was all beat to heck. It's been quite some time since we've been in a Ride & Drive vehicle that was all beat to heck. The reason for the well-worn F-150 with 30,000 miles on it is that ALTe has been showing off its extended-range EV technology to lots of people all around the country, and Kyle Maki has been the man on the scene more often than not. "This one, I've taken all over the country," he told AutoblogGreen. "I've wore out that seat, I think. The only reason this one wasn't driven here was because we were in Charlotte [NC] last week and I didn't want to take a chance and not make it in time for this event." In other words, ALTe is out there, ginning up excitement for the idea of a plug-in hybrid Ford with an electric range of up to 40 miles and which can then continue on gas for another 360 miles at around about 25 miles per gallon. ALTe wants to not only convert new vehicles but it also offers retrofits for fleets that are happy with their current fleet. The company offers converted versions of the Ford E350 and E450 utility vehicles now but the near-mythical F-150 PHEV is still "coming soon." Yes, orders are now being accepted, but you will be forgiven if you think this is all happening on a slow time scale. There are simply a lot of things to do before ALTe can sell the truck. ALTe is currently attempting to join Ford's EQVM program, which is the electric version of the standard Qualified Vehicle Modifiers program. The QVM program requires coachbuilders to "be successfully evaluated by Ford Motor Company on criteria such as engineering, the manufacturing process, quality control, and adherence to Ford and Lincoln Divisions guidelines." Qualified applicants must also meet all applicable Federal Motor Vehicle Safety Standards, conform to Ford/Lincoln conversion guidelines and agree to be inspected annually as well as have a "commitment to continuous improvement." Maki has a simpler explanation. "It basically means you're a preferred supplier, a Tier 1, if you will," he said.