2013 Ford Fusion Titanium on 2040-cars

Auto blog

Ford expands air bag recall nationwide

Ford Motor Co. has agreed to government demands to expand a driver's side air bag inflator recall to the entire U.S. The move announced Thursday adds 447,000 Ford vehicles to the list of those recalled due to driver's inflators made by Japan's Takata Corp. The inflators can explode with too much force, spewing shrapnel into drivers and passengers. Ford's action puts pressure on BMW and Chrysler, the only two automakers that haven't agreed to national recalls. The National Highway Traffic Safety Administration made the demand of five automakers, saying the inflators are dangerous. Honda and Mazda already took their recalls national. Previously the recalls were limited to high-humidity states mainly along the Gulf Coast. The Ford national recall covers certain 2005 to 2008 Mustangs and 2005 and 2006 GT sports cars. The company also announced it would recall the same cars in Canada, Mexico and a few other countries. Thursday's announcement brings to just over 502,000 the number of Ford vehicles under recall for Takata driver's side air bags. The company said it knows of one accident and injury from the problems, in a 2007 Mustang in North Carolina. Dealers will replace the inflators at no cost to customers. Last month, NHTSA demanded that Takata and the five automakers recall driver's inflators across the nation.Takata and Chrysler have refused and could face legal action. BMW says it's still evaluating the demand. Takata hired the New York public relations firm Sard Verbinnen & Co. and took out full-page advertisements Thursday in newspapers including The New York Times, The Wall Street Journal and three German publications. The ads, featuring a letter from Chairman and CEO Shigehisa Takata, said the company will work with NHTSA and automakers to expand the recalls by increasing production capacity for replacement air bags. The company said it's exploring whether other companies' air bags can be used in replacement kits, and it's increasing testing to find the exact cause of the problems. "Takata will work in unison with automakers to advance our common goal of putting the safety of customers first," the letter said. But in documents filed with NHTSA, Takata refused to do a national recall, saying it's not supported by testing data. The company also said NHTSA didn't have the authority to order a parts supplier to do a recall, and that only automakers can conduct them.

Ford recalling 12,300 2015 F-150 pickups

Ford is recalling 12,300 of its new 2015 F-150 pickup trucks in North America. According to the automaker, an upper l-shaft may have been riveted improperly on these trucks, which can cause it to separate. If that happens, drivers may lose steering control without warning. Yikes. The affected trucks were built at Ford's Kansas City Assembly Plant between March 21 and 25, as well as the Dearborn Truck Plant between March 21 and 30. There are 12,328 total trucks included in this recall – 8,963 in the United States, 3,348 in Canada, and 17 in Mexico. Only 5,606 of the trucks are in customers' hands, the rest have yet to be sold. Ford is not aware of any accidents or injuries related to this problem, but knows of one incident where steering control was lost, and believes it to be related to this issue. Scroll down for Ford's official statement. Related Video: FORD ISSUES SAFETY RECALL FOR CERTAIN 2015 FORD F-150 VEHICLES IN NORTH AMERICA FOR UPPER I-SHAFT RIVET ISSUE Ford Motor Company is issuing a safety recall for approximately 12,300 2015-model Ford F-150 vehicles in North America for an upper I-shaft that might have been riveted improperly, potentially causing it to separate. If that happens, it could result in the loss of steering control without warning, increasing the risk of a crash. Ford is not aware of any accidents or injuries, but is aware of one report of loss of steering believed to be related to this condition. Affected vehicles include certain 2015 F-150 vehicles built at Kansas City Assembly Plant from March 19, 2015 to March 21, 2015 and certain 2015 F-150 vehicles built at Dearborn Truck Plant from March 21, 2015 to March 30, 2015. There are 12,328 vehicles that might be affected in North America, including 8,963 in the United States and federalized territories, 3,348 in Canada and 17 in Mexico. Of those, 6,722 vehicles are unsold, meaning 5,606 vehicles are in customer's hands. Dealers will inspect the upper I-shaft assembly and replace it if necessary at no cost to the customer.

The 1965 Ford Mustang could have looked a lot different

The 1965 Ford Mustang is unquestionably an automotive design icon, and nearly every generation of Mustang has some connection to that original car. Because it's such a universally-known vehicle, we were amazed to see all the different designs that were being considered. Head of Ford's archives Ted Ryan recently shared photos of design proposals for the original Mustang on Twitter that he and Jamie Myler found, and we reached out to them to find out more. As Ryan initially noted, the photos were taken on August 19, 1962, and they are proposals for the Ford Mustang. Apparently Ford had committed to doing a Falcon-based youth-oriented car at this point, and it did have plans to launch the car in 1964 for the 1965 model year. But after having little success with early design proposals, the company asked all of its design studios — the Advanced Studio, Lincoln-Mercury Studio and Ford Studio — to submit proposals. With only about two years before the planned launch, Ford was understandably short on time, and it's believed that the studios only had a month to create and present these designs. Lincoln-Mercury design proposal View 8 Photos The majority of the designs, a total of five, came from the Advanced Studio, and part of this was because they already had a couple of concept designs in reserve it could present. Two other models representing three design possibilities came from Lincoln-Mercury, and just one model with two options came from Ford. The Advanced Studio proposals are shown in the gallery at the very top of this article, and the Lincoln-Mercury and Ford proposals are in the gallery directly above this paragraph. The Advanced Studio's most radical design is the one that was clearly related to the Mustang I concept that would be shown later that year with huge wraparound rear glass, turbine-inspired bumpers and enormous side scoops. The other proposals from the studio were more conservative, featuring simple lines, grilles reminiscent of the Falcon, and one even borrowing the jet-thruster-style taillights made famous on the Thunderbird. Lincoln-Mercury had some impressively bold designs, particularly its fastback that had buttresses to extend the shape all the way to the tail. This car had two different side trim possibilities. The other Lincoln-Mercury design was toned down a bit, but had two interesting possibilities for side detailing, as well as some crisp, low-profile tail fins.