2013 Ford Fusion Se on 2040-cars

Auto blog

2015 Ford Expedition stays the course, adds EcoBoost power

The era of the body-on-frame, fullsize SUV is rapidly vanishing in favor of smaller, unibody crossovers. However, Ford still sees life in the segment with the reveal of the updated 2015 Expedition, now available (solely) with the company's 3.5-liter EcoBoost V6. The new truck will make its public debut at the 2014 DFW Auto Show in Dallas on February 19.
The loss of the previous 5.4-liter V8 in favor of Ford's 3.5-liter, direct-injected, twin-turbocharged V6 engine might rankle some of the Expedition's fans, but Ford claims that the change gives the SUV better fuel economy, more power and increased low-end torque than before. Unfortunately, official engine specifications won't be released until later this year, but Ford says engine output will be similar to the 365 horsepower and 360 pound-feet of torque that this powerplant produces in other applications. The EcoBoost is mated to a six-speed automatic transmission, and the SUV now uses electrically assisted power steering, for an even greater fuel economy advantage. Ford claims this also allows for better maneuverability at low speeds and better feel at high speeds.
Exterior styling is basically unchanged for 2015. The front end has the same three-bar chrome grille and headlight design, but the lower air dam gets added chrome and LED lamps. The rear gets more brightwork on the hatch, and there's a chrome-tipped exhaust pipe. As before, Ford is offering the Expedition in two wheelbase lengths - 119 inches and 131 inches. A new, optional, continuously controlled damping system alters suspension settings constantly based on 46 parameters and offers comfort, normal and sport modes (just like the Expedition's sister, the recently refreshed and decidedly less-attractive Lincoln Navigator).

Where the 2023 GMC Sierra AT4X fits into the hierarchy of off-road trucks

The world of off-road pickups sure seems like it's getting crowded, but the reality is that half-ton trucks were always pretty capable, even with what seemed like fairly basic 4x4 packages. It wasn't until recently that manufacturers really started to carve out different off-road niches for their mainstream pickup offerings. With the introduction of the 2022 GMC Sierra 1500 AT4X (alongside its mechanical twin, the Chevy Silverado ZR2), the crowd has grown even thicker. Even we have trouble keeping up with the increased segmentation of off-road pickup trucks, so we threw together this handy guide to help you understand just where these various packages fit into the broader pickup hierarchy. Let's dive in.  Your basics If we say "Z71" or "FX4" to you, both will probably ring a bell. That's because they've been around a few days short of forever and their respective customers have grown so used to these package codes that OEMs got into the habit of just plastering them on the side of so-equipped truck beds. Anybody who sells a pickup truck offers some sort of basic off-road prep package like this one. Z71 is found on GM vehicles; FX4 is Ford's. Ram just calls it "Off Road Group," but no matter what you call them, they're all pretty similar.  Typical upgrades for this category include some additional ground clearance, a basic all-terrain tire, heavy-duty suspension upgrades and likely either a limited-slip or locking rear differential. These are pretty handy for anything beyond a rutted dirt road. On newer trucks — especially on higher trim levels — you'll probably also get some dedicated off-road drive modes.  Mid-range This is where things start to get interesting. To qualify for this category, a locking rear differential is a must. Most of the names in this segment are well-established too, though some (Nissan Titan Pro-4X, anyone?) may not necessarily be on your radar. The Toyota Tundra TRD Pro checks in here, as does the Ram Rebel, Chevy Silverado Trail Boss and GMC Sierra AT4 (no X!).  Realistically, if there's somewhere you need to go and one of these trucks won't do it, you might want to consider a helicopter. But it's 2021, and our thirst for capability is strong, so of course, there's a way to spend more of your money on this type of thing. Onward! Entry-hardcore Here we are, the home of the new 2022 GMC Sierra AT4X and Chevrolet Silverado ZR2. This is a tiny niche, otherwise occupied only by the Ford F-150 Tremor.

Aluminum lightweighting does, in fact, save fuel

When the best-selling US truck sheds the equivalent weight of three football fullbacks by shifting to aluminum, folks start paying attention. Oak Ridge National Laboratory took a closer look at whether the reduced fuel consumption from a lighter aluminum body makes up for the fact that producing aluminum is far more energy intensive than steel. And the results of the study are pretty encouraging. In a nutshell, the energy needed to produce a vehicle's raw materials accounts for about 10 percent of a typical vehicle's carbon footprint during its total lifecycle, and that number is up from six percent because of advancements in fuel economy (fuel use is down to about 68 percent of total emissions from about 75 percent). Still, even with that higher material-extraction share, the fuel-efficiency gains from aluminum compared to steel will offset the additional vehicle-extraction energy in just 12,000 miles of driving, according to the study. That means that, from an environmental standpoint, aluminum vehicles are playing with the house's money after just one year on the road. Aluminum-sheet construction got topical real quickly earlier this year when Ford said the 2015 F-150 pickup truck would go to a 93-percent aluminum body construction. In addition to aluminum being less corrosive than steel, that change caused the F-150 to shed 700 pounds from its curb weight. And it looks like the Explorer and Expedition SUVs may go on an aluminum diet next. Take a look at SAE International's synopsis of the Oak Ridge Lab's study below. Life Cycle Energy and Environmental Assessment of Aluminum-Intensive Vehicle Design Advanced lightweight materials are increasingly being incorporated into new vehicle designs by automakers to enhance performance and assist in complying with increasing requirements of corporate average fuel economy standards. To assess the primary energy and carbon dioxide equivalent (CO2e) implications of vehicle designs utilizing these materials, this study examines the potential life cycle impacts of two lightweight material alternative vehicle designs, i.e., steel and aluminum of a typical passenger vehicle operated today in North America. LCA for three common alternative lightweight vehicle designs are evaluated: current production ("Baseline"), an advanced high strength steel and aluminum design ("LWSV"), and an aluminum-intensive design (AIV).