2012 Ford Fusion Sel on 2040-cars

Auto blog

Ford Mustang, F-150, Expedition, and Lincoln Navigator recalled

The Basics: Ford will recall 201,900 examples of the 2011-2012 F-150, 2012 Expedition, 2012 Mustang, and 2012 Lincoln Navigator. The affected vehicles have the 6R80 transmission. Of the total, there are 84,000 of them in the United States and 17,900 in Canada. The Problem: The output speed sensor on the vehicle's transmission lead frame can force the gearbox to downshift into first gear. If this happens at high speed, it could cause the rear tires to slide or lock up. Injuries/Deaths: There are no reported injuries, but Ford know of three accidents related to this problem. The Fix: Dealers will update the powertrain control module software to eliminate the problem, and they'll also replace the transmission lead frame. If You Own One: Ford will begin notifying affected customers by mail on May 23. Related Video: FORD MOTOR COMPANY ISSUES THREE SAFETY RECALLS AND TWO SAFETY COMPLIANCE RECALLS IN NORTH AMERICA DEARBORN, Mich., April 27, 2016 – Ford Motor Company is issuing three safety recalls and two safety compliance recalls in North America. Details are as follows: Ford issues safety recall and customer satisfaction program for certain 2011-2012 Ford F-150, and 2012 Ford Expedition, Ford Mustang and Lincoln Navigator vehicles in North America to update powertrain control module software and inspect for certain diagnostic trouble codes Ford is issuing a safety recall for approximately 202,000 2011-2012 Ford F-150, and 2012 Ford Expedition, Ford Mustang and Lincoln Navigator vehicles for a potential issue with the output speed sensor on the vehicle's transmission lead frame. Under certain conditions, the transmission controls could force a temporary downshift into first gear. Depending on the speed of the vehicle at the time of the downshift, the driver could experience an abrupt speed reduction that could cause the rear tires to slide or lock up. This condition could result in loss of vehicle control, increasing the risk of a crash. Ford is aware of three reports of accidents and no injuries related to this condition. Affected vehicles are equipped with a 6R80 transmission and include certain 2011-2012 Ford F-150 vehicles built at Dearborn Truck Plant and Kansas City Assembly Plant, Aug. 19, 2011 through March 9, 2012; 2012 Ford Expedition vehicles built at Kentucky Truck Plant, Aug. 19, 2011 through Dec. 19, 2011; Ford Mustang vehicles built at Flat Rock Assembly Plant, Aug. 19, 2011 through Feb.

Detroit 3 and UAW set for showdown over tiered wages

This week, thousands of United Auto Workers will converge on Cobo Center in Detroit for the Special Convention on Collective Bargaining, an every-four-year event that lets members tell UAW leaders what the negotiating priorities should be during contract negotiations. This is where a lot of sand and a lot of lines start coming together in preparation for contract negotiations between the UAW and the Detroit 3 automakers, which will happen later this year. Number one on the UAW agenda is the end of the two-tier wage system created in 2007 to help the automakers get through bankruptcy; veteran workers are paid the Tier 1 rate of around $29.00 per hour, new hires are paid the Tier 2 rate of between $15 and $20 and get about half the benefits of Tier 1. Tier 2 hiring has been an undoubted success for the automakers, allowing them to keep factories in the US and hire more workers. By agreement, it is capped at a certain percentage of each automaker's workforce, and while the union's ultimate position is to get rid of the dual-scale system entirely; one leader said Ford could easily afford the $335 million it would take to convert all its workers to Tier 1 out of its $6.9 billion in 2014 North American profit, and General Motors could do the same out of the $5 billion it is handing to investors through the (admittedly forced) share buyback. Other delegates say that at the very least they'd be happy with enforcement of the current caps in the new contract. The automakers, conversely, would welcome expansion of the Tier 2 ranks. Including benefits, import automakers pay workers "in the high $40 range" per hour, according to an analyst, while Ford and GM pay about $59 in wages and benefits per hour. More Tier 2 workers on the rolls would let those two companies get labor cost parity with the competition. Fiat-Chrysler pays wages closer to the imports because of special exceptions in its UAW contract that allow unlimited Tier 2 hiring; those exceptions will end on September 14 and bring FCA into line with the other domestics, unless the new contract maintains them. FCA CEO Sergio Marchionne is opposed to the two-tier system, having called it "almost offensive." One analyst says the UAW might win a sizable pay raise for Tier 2 and a small increase for Tier 1, but the keystone issue will be how the hiring matrix can help the automakers keep overall wages in line with the imports.

Ford F-150 Raptor gets EcoBoost V6, new chassis and aluminum body [w/videos]

The Autoblog staff universally loves the Ford F-150 SVT Raptor, and the truck's about to get even better. Coming in the fall of 2016 (we'd assume as a 2017 model), the next off-road-ready pickup from Ford will boast an all-new, purpose-built, high-strength steel frame and a lightweight aluminum body that saves more than 500 pounds when compared to the current Raptor. It's six inches wider overall than the regular 2015 F-150, which both makes it look awfully mean but also aids in stability when driving fast off the road, and new LED lighting elements make it stand out when the sun goes dim. Under the Raptor's muscular hood will be a 3.5-liter EcoBoost V6 engine that will make more than the current 6.2-liter V8's 411 horsepower and 434 pound-feet of torque, though we don't have exact power figures for the next-gen Raptor quite yet. Also new will be a 10-speed automatic transmission, which will replace the current six-speed unit and ought to provide appropriate ratios for both rock crawling and high-speed desert trail running. Speaking of high-speed running, what makes the Raptor tick, perhaps more than any other single component, are its custom-designed suspension bits. Redesigned, larger Fox Racing Shocks with more suspension travel and all-new terrain management technology, combined with BFGoodrich All-Terrain KO2 tires, are the bits and pieces that allow for Baja-style off-roading. View 14 Photos The four-wheel-drive system in the next-gen Raptor will include a Terrain Management with settings for Normal driving, Street driving, Weather mode (for rain, snow or ice), Mud and Sand, Baja mode and Rock mode. According to Ford, the Raptor's new transfer case is designed to work as both a locking unit for crawling and a full-time unit for other off-road applications. A Torsen front differential will be optional. Basically, if all of this new stuff turns out to be as good in practice as it sounds in a press release, the next F-150 Raptor will only serve to separate Ford's off-road pickup even further from its half-hearted competitors. Feel free to watch the video and read more down below.