2011 Ford Fusion Sel on 2040-cars

Auto blog

Ford Gets The Aluminum F-150 Ready For Prime Time

Russell Barnett, a Ford dealer in Tennessee, is ready for aluminum. Ford is using the metal almost exclusively in body of the 2015 version of its best-selling F-150 pickup, which starts arriving at dealerships next month. Barnett is already answering customers' questions about the truck. And he's updated his repair shop not only for the F-150, but in anticipation that other Ford brands such as the Mustang will eventually make the switch from steel. But, just in case, he ordered some extra steel-bodied 2014 pickups. "There will be some people who won't want to change for a while," says Barnett, who says pickups make up around half of the annual sales at his dealership in rural Winchester. Ford is doubling down on aluminum, which is lighter - and more expensive - than steel but just as tough. The new truck is the company's response to customers' requests for a more fuel-efficient and nimbler pickup. Fordhopes the advantages outweigh customer doubts about the durability of aluminum or potential repair costs for the pricier metal. It's a big risk. So far this year, one out of every three vehicles Ford sold in the U.S. was an F-Series pickup. Morgan Stanley estimates F-Series trucks account for 90 percent of Ford's global automotive profit. On Tuesday, it kicked off production of the new truck at its Dearborn Truck Plant, four miles from the company's headquarters. "Yeah, this is a risk, but it's one well worth taking." said Bill Ford, the company's executive chairman, as he stood alongside the assembly line. "For our customer, this is a big, big leap forward." The trucks have been the best-selling vehicles in the U.S. for 32 straight years; last year, Ford sold nearly 100,000 more full-size pickups than General Motors. Aluminum isn't new to the auto industry, but this is the first time it will cover the entire body of such a high-volume vehicle. Ford made 647,697 F-150 pickups at its two U.S. plants last year; that's one every 49 seconds. If Ford's bet pays off, it could pad its lead in the lucrative truck market. More importantly, aluminum "future proofs" the truck - and the company - in an era of rising fuel economy standards, says Karl Brauer, a senior analyst with Kelley Blue Book. Ford will announce the truck's fuel economy figures later this month. That could determine if it steals customers away from the Silverado or Ram. Truck buyers are among the most loyal in the auto market.

Ford drops Focus RS teaser ahead of Feb 3 reveal

Ford is trying to get us hyped for the unveiling of the latest Focus RS on February 3 with this new video teaser. The clip showcases the hot hatch doing some big slides in the wet and dry during testing in Europe and the US, and it definitely makes us even more curious about what the Blue Oval has in store with the RS. Even in this short teaser, Ford continues to dress the more aggressive nose of the Focus RS in camouflage, like the previous test cars. Unfortunately, what's going on under all of that concealment remains a bit of a mystery. Rumors suggest the RS likely uses a tuned version of the Blue Oval's 2.3-liter turbocharged four-cylinder estimated to make between 325 and 350 horsepower. A speculated torque-vectoring all-wheel-drive system should keep fears of torque steer at bay, and larger brakes on the test mules indicate that bringing it all to a halt shouldn't be a problem, either. We do know that the hotter Focus will be among the "more than 12" vehicles that the new Ford Performance division will develop through 2020, and the RS will come to the US for the first time. However, US-spec RS models will likely be imported from Europe, which will keep numbers here low and will mean prices estimated to be around $30,000 or more. Until the official specs become available, at least enjoy watching this hot hatch's ability to slide.

2015 Hennessey Ford Mustang hits 207.9 mph

After hitting over 195 miles per hour a few months ago, John Hennessey was barely out of his personal HPE700 Mustang before he said that 200 mph was achievable. Don't doubt a man who knows a ton about taking cars to insane speeds. With the new HPE750 Mustang, he and his customers can finally surpass the 200-mph mark in their cars. "If at first you don't succeed, just add more horsepower and rpm and try again," Hennessey said in the company's announcement. Rather than the 717 horsepower and 632 pound-feet of torque from the supercharged 5.0-liter V8 in the HPE700, the HPE750 ratchets the same powertrain up to an even more potent 774 hp and 648 lb-ft. In a real show of confidence, the Hennessey team brought along Jay Leno when it returned to the Continental Tire Proving Grounds in Uvalde, TX, to set a new top speed with the HPE750. The upgrades to the Mustang definitely paid off because the pony car reached a GPS-verified 207.9 miles per hour down the straight. The run will eventually appear on a segment on the upcoming Jay Leno's Garage TV show that will air CNBC. Prices for the HPE750 start at $59,500 USD, including the base 2015 Mustang GT, but building an exact replica of this one would cost $69,374, according to Hennessey. In addition to the huge top speed, the company claims that the coupe can reach 60 mph in 3.4 seconds and cover the quarter mile in 10.9 seconds. 774 HP Hennessey Mustang Tested to 207.9 mph Jay Leno visits Texas tuner for upcoming TV series on CNBC June 2, 2015 Uvalde, Texas—On Wednesday, May 27, 2015, professional driver, Brian Smith, drove the Hennessey HPE750 Supercharged Mustang to a top speed of 207.9 mph. In the process, Hennessey's potent pony car became the first 2015 Mustang to break the 200 mph mark. Jay Leno was on hand to witness the record speed while filming an upcoming episode of Jay Leno's Garage, which will air on CNBC later this year. The run was made on the 8.5 mile high speed oval at the Continental Tire Proving Grounds located in Uvalde, Texas – the same test track where John Hennessey test drove the company's HPE700 Mustang to a top speed of 195 mph back in February of this year. During both tests, speeds were validated with Racelogic's VBox 3i GPS data logging system. "If at first you don't succeed, just add more horsepower and rpm and try again," said company founder and president, John Hennessey.