4dr Sel Fwd Suv 3.5l Cd Front Wheel Drive Heated Front Seats Power Driver Seat on 2040-cars

Auto blog

2020 Ford Super Duty Tremor vs. 2020 Ram 2500 Power Wagon: How they compare on paper

(Editor's Note: Due to inconsistencies in manufacturer reporting methods for ground clearance, an earlier version of this article stated the Ram Power Wagon's "ground clearance" to be 14.3 inches when in fact that is its "running clearance," which is deemed the ground to the lowest point of the truck MINUS the axles. The numbers below now reflect true ground clearance, or the ground to the lowest point of the truck, period. The chart and text have been updated to show both measurements for maximum accuracy and clarity.) For several years, the Ram 2500 Power Wagon has been the unquestioned king of heavy duty off-roaders. But competition is coming, and some of the strongest is from the 2020 Ford Super Duty Tremor. We decided to take a look at these trucks' specs and features to see how they compare in the realm of capability. The raw numbers are below along with some notes on each truck's unique features that go beyond the spec sheet. Off-road capability While both of these trucks boast impressive clambering abilities, each with particular strengths. The Super Duty Tremor earns points for better ground clearance and axle clearance, as well as approach angle. Some of the credit goes to the larger 35-inch tires and a shortened front air dam. On the other hand, the Power Wagon leads the Ford in departure angle, and in the ramp travel index. The latter is largely the result of the Power Wagon's electronically disconnecting sway bars, and for those unfamiliar, the ramp travel index measures articulation by having a truck drive one wheel up a ramp with the other on the ground. The farther the truck goes with the ground wheel in contact with the, well, ground, the better the score and the better the articulation. Numbers aren't everything, though. It's important to look at the equipment each truck offers, and things are closer, here, but the Ram still has an edge. Both feature off-road-friendly solid axles at both ends, but only the Power Wagon has fully locking differentials front and rear. The Tremor has a locking rear differential while the front is a limited-slip differential. The Power Wagon comes standard with a 12,000-pound integrated Warn winch, whereas such a winch is an option on the Tremor. The Tremor has its own unique features, though, including the 35-inch tires rather than the Ram's 33-inchers, and it has Ford's fancy off-road cruise control function called Trail Control. Both trucks have shocks and springs tuned for off-road use.

Want a V8 on the cheap? Buy a work truck

In case you didn't notice, V8 cars have gotten pretty expensive. If you want a modern muscle car like the Dodge Challenger R/T, Ford Mustang GT, or Chevy Camaro SS, you'll need between $34,000 and $38,000 for a stripped out example of one. The cheapest of those is the Challenger, and the priciest is the Camaro. These are also the cheapest V8 cars the companies offer. But if you absolutely have to have a V8 for less, there is an option, work trucks. As it turns out, all of the Big Three offer their most basic work trucks with V8s. And because they're so basic, they're pretty affordable, especially when sticking with the standard two-wheel drive. A Ram 1500 Tradesman with a V8 can be had for as little as $29,840, which is a little more than $4,000 less than a Challenger R/T. For a bit more at $30,275, you can have a Chevy Silverado W/T, almost $8,000 less than a Camaro SS. The most expensive is the V8 Ford F-150 starts at a starting price of $30,670, which is a bit over $5,000 less than the Mustang. Of course you'll be in an ultra bare bones vehicle with few comforts, and the price will go up if you add stuff, but we're bargain hunting here, and sacrifices are sometimes necessary. Besides, what you lose in comfort, you gain in loads of cargo space and towing (try to look at the bright side). Also, as a side note, all three trucks are available with optional electronic locking rear differentials. At the discounted price of these trucks, you still get a heaping helping of power. The most potent of the trio is the Ram 1500 Tradesman with 395 horsepower and 410 pound-feet of torque generated by a 5.7-liter V8. Compared with the Challenger R/T, the Ram is up by 20 horsepower and they're tied for torque. The value proposition is even more stark between the two vehicles when looking at the price per horsepower. Each pony in the Ram costs $75.54, while the Challenger charges you $90.91. The Challenger is also more expensive per horsepower than its close competitors. The F-150's 5.0-liter V8 is just barely behind the Ram with 395 horsepower and 400 pound-feet of torque. That's still more power than the Challenger, and it matches the torque of the 2017 Mustang GT. On the down side, it still would be down 20 horsepower on that same 2017 Mustang, and it's behind by 60 horsepower and 20 pound-feet on the new 2018 Mustang GT. The F-150 also just edges out the Mustang in the dollar per horsepower measure.

Ford 3D-printing Mustang out of chocolate and candy for Valentine's Day

Is your beloved in love with the new 2015 Ford Mustang? Do they like chocolate (that's a trick question - everyone likes chocolate)? Are they a bit of a futurist? Then this Hallmark holiday, you need to get them this Ford Mustang, 3D-printed in sweet, delicious chocolate.
Ford is teaming with 3D Systems' Sugar Lab in LA to produce the super-accurate pony car confections in both chocolate and sugar candy varieties. The process kicked off with a CAD rendering of the 2015 Mustang, which was then programmed into the 3D printer. After a bit of work from the machine, a four-inch long, two-inch tall Mustang was the result. Why the tieup with 3D Systems, though?
"We wanted to create something fun to show that while 3D printing made these edible Mustangs, manufacturing-level 3D printing was used in the development of Ford's all-new sports car," said Paul Susalla, Ford's supervisor of 3D printing.