1957 Ford Fairlan ,,4-door on 2040-cars
Mason, Texas, United States
|
957 ford fairlane 4-door ,,, this car has been parked in a dry storage since the 1960s ,,it has a very straight body n,no dents ,a little caner on the body beneath the door ,all doors and windows still shut great and line up perfect ,the body lines on this car are great, this car only has a few missing parts ,the seats are with the car and in fair shape just need to be recovered as this car is a restore ,the seats were taken out in the pictures to power wash the entire car . this car was one of many i had plans to restore but age and health have caught up with me ,so i choose to pass it on ,,i shall have many listed as time goes by.this car is being sold as is ,it still has a great drive train and chassis ,the motor is missing ,it still has the fordamatic tranny,driveline and rearend it is all original ,,, if your looking for a good solid car, parts or somethig to build a rat rod ,this is it ,,this car will be sold with a bill of sale ,,,500.00 down at end of auction ,payable
|
Ford Fairlane for Sale
1964 ford fairlane thunderbolt 427 highriser with four speed top loader
1967 fairlane rare 2 barrel gta with martiautoworks report(US $7,500.00)
1966 ford fairlane 500xl 4.7l
Frame up restored sunliner convertible 289 v8 c6(US $49,900.00)
Frame off restored fairlane 500 convertible 312 v8(US $89,900.00)
1958, ford, fairlane,
Auto Services in Texas
Z`s Auto & Muffler No 5 ★★★★★
Wright Touch Mobile Oil & Lube ★★★★★
Worwind Automotive Repair ★★★★★
V T Auto Repair ★★★★★
Tyler Ford ★★★★★
Triple A Autosale ★★★★★
Auto blog
Second-tier UAW workers promoted for first time after Ford hits quota
Mon, Feb 2 2015The United Auto Workers put out a statement on Friday that 55 Ford workers chosen by seniority would be moved from the Tier 2, entry-level pay rate of around $19 per hour to the Tier 1, non-entry-level rate of about $28 per hour. One of the stipulations in the 2011 UAW-Ford agreement was that only 20-percent of the total hourly workforce could be paid the Tier 2 wages agreed upon in 2007; after that, those workers had to be moved to Tier 1. Even so, the new Tier 1 status makes them less expensive to Ford than veteran Tier 1 workers because they receive fewer benefits. However, Automotive News had reported that same day that Ford was 69 workers shy of the limit, and when AN asked Ford about the situation Ford said it had "some room" on the entry-level roster. If workers do move to the higher pay grade, it will be the first time that's happened since the two-tier system was agreed. But it sounds like there's going to be some haggling between the UAW and Ford before that happens. Ford is the only one of the Detroit 3 automakers to have to work with a cap, since it didn't go through bankruptcy proceedings during The Great Recession; General Motors and Chrysler jettisoned the cap in 2009. GM is said to have 16 percent of its hourly workers at Tier 2 while Chrysler has 42 percent, but Fiat-Chrysler CEO Sergio Marchionne has long been opposed to the two-wage system. The UAW is preparing for its 2015 negotiations with the US automakers. It wants to eliminate the difference in pay by going to the higher scale, if there is a consensus among automakers it seems to be that they also want a single wage, but less than the higher scale, with the addition of profit-based bonuses. The recent statement from the labor union is below. UAW President Dennis Williams and UAW-Ford Vice President Jimmy Settles announced today that the union is delivering on its promise to convert workers DETROIT, Jan. 30, 2015 /PRNewswire/ -- UAW President Dennis Williams and UAW-Ford Vice President Jimmy Settles announced today that the union is delivering on its promise to convert workers making entry-level wages to traditional employees. "The 2011 UAW-Ford agreement allows for a contractual limit of entry-level employees. Once that threshold is surpassed, entry-level employees convert by seniority to 'regular, non-entry level employment.' At this time, fifty-five UAW-Ford workers will receive the wage increases, which put them in the category of non entry-level employment.
Foreign automakers pay from $38 to $65 per hour to non-union workers
Sun, Mar 29 2015As leaders for the United Auto Workers gather in Detroit for their Special Convention on Collective Bargaining to work out the negotiating stance for this year's new labor agreements with the Detroit 3 automakers, what they most want to do is figure out how to eliminate the two-tier wage scale. However, the lower Tier 2 wage has allowed the domestic automakers to reduce their labor costs, hire more workers, and compete better with their import competition. As it stands, per-hour labor rates including benefits are $58 at General Motors, $57 at Ford, and $48 at Fiat-Chrysler – a reflection of FCA's much greater number of Tier 2 workers. The Center for Automotive Research released a study of labor rates (including benefits) that put numbers to what the imports pay: Mercedes-Benz pays the most, at an average of $65 per hour, Volkswagen pays the least, at $38 per hour, and BMW is just a hair above that at $39 per hour. Among the Detroit competitors, Honda workers earn an average of $49 per hour, at Toyota it's $48 per hour, Nissan is $42 per hour, and Hyundai-Kia pays $41 per hour. The lower import wages are aided by their greater use of temporary workers compared to the domestics. Automotive News says the ten-dollar gap between those foreign camakers and the domestics turns out to about an extra $250 per car in labor, which adds up quickly when you're pumping out many millions of cars. That $250-per-car number is one that, come negotiating time, the Detroit 3 will want to reduce, as the UAW is trying to raise both Tier 1 and Tier 2 wages. Another wrinkle is that the domestic carmakers are considering the wide adoption of a third wage level lower than Tier 2. Some workers who do minor tasks like assembling parts trays kits and battery packs already make less than Tier 2, but the UAW will be quite wary about cementing yet another wage scale at the bottom of the system while it's trying to fight a bigger battle at the top. News Source: Automotive News - sub. req., BloombergImage Credit: AP Photo/Erik Schelzig Earnings/Financials UAW/Unions BMW Chevrolet Fiat Ford GM Honda Hyundai Kia Mercedes-Benz Nissan Toyota Volkswagen labor wages collective bargaining labor costs
2019 Chevy Blazer vs Honda Passport, other midsize crossovers: How they compare
Wed, Nov 28 2018The two-row midsize crossover market is a sizable one that just keeps growing. The two newest additions being the 2019 Chevy Blazer and the 2019 Honda Passport, additions we just recently drove. As such, it seemed like a good time to see how their numbers compare with the veterans of the segment: Ford Edge, Jeep Grand Cherokee, Hyundai Santa Fe and Nissan Murano. In this comparison to see where it lands in the numbers game, we'll take a look at everything including power, torque, towing, ground clearance, passenger room, cargo space, fuel economy and pricing. Cue the chart. Powertrain The Passport only has one engine option, Honda's trusty 3.5-liter V6. You can find this engine in both the Pilot and Ridgeline, and we like it in all its applications. But if you're looking for something more affordable or more frugal, you're out of luck. The Passport is one of just two that offer just one engine option. Most of the others have two choices, and Jeep even offers three. Compared with similar engine options, the Passport is pretty middling. The Ford Edge ST's turbo V6 makes the most power and torque at 335 ponies and 380 pound-feet. Next up is the Blazer, the only other to break 300 horsepower, and then the 295-horsepower Grand Cherokee. The Passport does beat the V6 Murano and the turbocharged Santa Fe, though. 2019 Chevrolet Blazer View 37 Photos For vehicles with smaller engines, the Edge wins again with its 250-horsepower turbocharged four-cylinder. The Chevy Blazer is next, but at 193 horsepower, it's barely ahead of the 185-horsepower Santa Fe. The Jeep Grand Cherokee has a couple of powertrain aces, though. It's the only vehicle available with a V8, and it makes an impressive 360 horsepower and 390 pound-feet of torque. There's even a turbodiesel model with 240 horsepower and 420 pound-feet of torque, the most twist of the group. The Grand Cherokee is also the choice if you want to tow much. The V6 models will pull 6,200 pounds, and the V8 and diesel can handle 7,200 pounds. Add 200 more pounds to the diesel if it only has rear drive. 2019 Honda Passport View 19 Photos When it comes to fuel economy, the front-drive four-cylinder Edge and Santa Fe are tied for the best, with the all-wheel-drive Edge getting one more mpg on the all-wheel-drive Santa Fe on the highway. The Murano comes up next.
















