1955 Ford Fairlane Base V8 on 2040-cars

Auto blog

Recharge Wrap-up: Ford 1.0L EcoBoost a hit in Europe; Build a tiny inverter, win $1 million

In Europe, Ford's 1.0-liter EcoBoost engine is the best-selling turbocharged gasoline engine. The three-cylinder motor powers 20 percent of new Fords sold in Europe. Earlier this year, it won its third International Engine of the Year award, and between January and June, it was sold in about 120,000 cars. So far this year, 38 percent of Fords sold in the Netherlands, 35 percent in Denmark and 32 percent in Switzerland have been powered by the 1.0-liter EcoBoost. The engine's turbocharger spins at 248,000 rpm, and provides 24 psi of pressure. The engine produces up to 138 horsepower, depending on the version. Read more in the press release below. When lithium-ion battery packs are retired from the road, remanufacturing, repurposing, and recycling are worthwhile options, according to a study by Mineta Transportation Institute. The study included a cost-benefit analysis of those three options, and found remanufacturing to be the best route. To get the most out of them, batteries should be tested and have their damaged cells replaced then put back to use. Repurposing is the second best option, using the remaining available charge for something besides cars. Recycling on its own isn't profitable, but it could make economic sense with "increased technological breakthroughs." Learn more at Recycling International or download the report here. A smaller inverter for EVs can win you $1 million. The Little Box Challenge is an open competition to build a power inverter with a density of at least 50 watts per cubic inch. Google and the Institute of Electrical and Electronics Engineers (IEEE) are offering the hefty prize to the team that builds the inverter with the highest power density within an enclosed volume of 40 cubic inches. Teams must register by September 30. Read more at Green Car Congress or learn more at the Little Box Challenge website.

2021 Ford Raptor vs Ram TRX Specs Compared

Hopefully by now you've had a chance to read our thorough 2021 Ford F-150 Raptor review. If not, check it out, 'cause you'll find a lot more detail and expertise than normal (for Autoblog or anywhere) thanks to Dan Edmunds' vast engineering and off-roading background. If you want all the dirt on the Raptor, pun intended, that's where to turn. If you just want to gaze at the specs, however, and wonder how they compare to the old Raptor or to the Ram TRX, check out the chart below. There you will find dimensions, clearances, angles, weights, capacities, engine output and fuel economy for the 2021 Raptor with both 35-inch and 37-inch tires. As Dan explains in his first drive, there's actually more going on there than just tire sizes. You'll find the same specs for the outgoing second-generation Raptor plus the 2021 Ram 1500 TRX and the less extreme Ram Rebel trim level in the chart, too.  Other reviews and deep dives about the F-150 and TRX 2021 Ram 1500 TRX First Drive Review Our review of the Raptor's chief competitor, the mighty TRX. That just sounds like we're talking about Jurassic Park.    2021 Ram TRX Suspension Deep Dive and RTI ramp test Follow along with engineer Dan Edmunds as he takes you under the TRX and explains everything there is to know about its suspension -- and how it's able to do what it does.    2021 Ford F-150 Full-Line Review   2021 Ford F-150 Suspension Deep Dive It's a totally different F-150 flavor to be sure, but even the volume-selling XLT received a lot of work for 2021. Dan Edmunds takes you underneath the truck to show you what's different and what difference it makes.    Photo Galleries of Each Truck 2021 Ford F-150 Raptor 2021 Ford F-150 Raptor View 16 Photos   2021 Ram 1500 TRX 2021 Ram 1500 TRX front 3/4 in motion View 53 Photos   Ram 1500 Rebel 2019 Ram 1500 Rebel View 42 Photos   Second-Generation Ford Raptor 2019 Ford F-150 Raptor View 37 Photos

NHTSA investigating Ford's solution to May 2014 power steering recall

The National Highway Traffic Safety Administration is investigating a complaint that Ford's response to a May 2014 recall of the 2008 to 2011 Ford Escape and Mercury Mariner doesn't quite go far enough to solve a troubling power-steering problem. Roughly a year ago, Ford recalled nearly a million vehicles after it was found that a problem with the torque sensor's communication with the power steering control module could cut steering assistance for drivers. While manual steering would still be available, the problem was enough to ask drivers to report in to have the PSCM inspected, and if necessary, replaced (along with the torque sensor, or in dramatic cases, the entire steering column). That would only happen, though, if trouble codes were being thrown. If there weren't any problems, dealers were told to simply update the PSCM's software so that any issues between it and the torque sensor would simply throw a visual and audio warning – power steering would still be maintained. The petitioner claimed that following the recall work, he still experienced a problem with the torque sensor. According to NHTSA, a claim was made that Ford didn't go far enough in its solution to the problem, and that "the software update itself may in fact cause further issues with the affected vehicle's power steering, causing it to fail, and ultimately requiring replacement of the torque sensor or entire steering column." The petition was filed in early February and is now officially being looked into by NHTSA.