2011 Ford F-450 Super Duty Xl Crew Cab Pickup 4-door 6.7l on 2040-cars

Auto blog

2017-19 Ford Super Duty trucks recalled for tailgates that could open

Ford announced two separate recalls today, though neither has resulted in any known injuries. The first recall, which deals with a tailgate malfunction, affects 261,617 examples of 2017-2019 F-250, F-350, and F-450 Super Duty pickups. The second, which anticipates the possibility of a fuel leak, affects 3,893 units of 2020 Explorer and 2020 Lincoln Aviator SUVs with 3.0-liter engines. Ford says tailgates might accidentally open on some 2017-2019 Super Duty trucks because of a short circuit. If the pickups have an electric tailgate latch-release switch on the tailgate handle, water might get into the wiring. If the water hits the right spots, a short circuit could cause the switch to release the tailgate latch. In a worst-case scenario where the tailgate opens while driving, contents of the truck's bed could fall out and create a safety hazard. Dealerships will fix the problem by modifying the tailgate frame wiring harnesses with jumper pigtails and install a new tailgate handle release switch. Of the lot, 231,664 trucks are in the U.S., and 29,953 are in Canada. The Ford recall number is 19S48.  The second recall is much smaller, involving fewer than 4,000 vehicles. In certain 2020 Explorers and Aviators with 3.0-liter engines, Ford says, "The convolute protective sleeve on the liquid fuel line is not long enough, which may allow for potential hard contact with the convolute-protected vapor fuel line. Over time, with vibration and engine roll, hard contact between the two fuel lines could cause the convolute on the vapor fuel line to rub through the plastic liquid fuel line." If that happens, it could be a fire risk and hazardous for drivers and passengers. Only 35 of those SUVs are in Canada, and the rest are in the United States. Dealers will fix the problem by replacing the defective convolute with a full-length piece and tying it down with a strap. The recall reference number for the Aviators and Explorers is 19S49. The recall adds to what has otherwise been a rocky early production phase for the new Explorers and Aviators.

New European charging network will offer speeds up to 350 kW

It's about to get easier to fast-charge your electric vehicle across Europe thanks to four major automakers working together in a new joint venture. BMW, Daimler (Mercedes-Benz), Ford, and the VW Group (Audi and Porsche) have all signed a Memorandum of Understanding to install about 400 DC fast charging sites in Europe. As you may know, there are different types of fast chargers, but the ones that this group is talking about installing will be able to charge an EV in much less time than other stations. That's because these chargers will offer power levels of "up to 350 kW." Compare that to what's generally considered the current gold standard, the Tesla Superchargers, which have rates of up to 145 kW and a statement not that long ago from a Ford exec that suggested that 150 kW chargers would be the new normal. Of course, the Tesla chargers use the company's proprietary connector and the new network the JV is setting up will use the CCS standard. The first new stations will go up in 2017 and those 400 sites are just the beginning. A joint statement by the JV says that EV drivers will "have access to thousands of high-powered charging points" by 2020 along highways and main roads. "The charging experience is expected to evolve to be as convenient as refueling at conventional gas stations," the companies said. While not every electric vehicle will be able to take advantage of the 350 kW charging rate, the companies involved would be silly to build the infrastructure without vehicles that can handle that kind of energy flow. The JV says it would welcome participation from other automakers and will cooperate with interested regional partners. Related Video: News Source: Daimler Green Audi BMW Ford Mercedes-Benz Porsche Volkswagen Electric fast charging

Ford 3D-printing Mustang out of chocolate and candy for Valentine's Day

Is your beloved in love with the new 2015 Ford Mustang? Do they like chocolate (that's a trick question - everyone likes chocolate)? Are they a bit of a futurist? Then this Hallmark holiday, you need to get them this Ford Mustang, 3D-printed in sweet, delicious chocolate.
Ford is teaming with 3D Systems' Sugar Lab in LA to produce the super-accurate pony car confections in both chocolate and sugar candy varieties. The process kicked off with a CAD rendering of the 2015 Mustang, which was then programmed into the 3D printer. After a bit of work from the machine, a four-inch long, two-inch tall Mustang was the result. Why the tieup with 3D Systems, though?
"We wanted to create something fun to show that while 3D printing made these edible Mustangs, manufacturing-level 3D printing was used in the development of Ford's all-new sports car," said Paul Susalla, Ford's supervisor of 3D printing.